Audited Supplier
Flygoo AA-12-L Venturi Fertilizer Injector with Valve for Ozone Water Treatment Machinery
Flygoo PVDF venturi injector is designed to be used with an ozone generator for water treatment. It is excellent for ozone mass transfer. Molded PVDF & rugged construction ensure years of life. Ozone suction port quickly transfers ozone gas into water stream under pressure.The ozone venturi injector consists of three parts: the tressurized pipe, the suction chamber, and the nozzle. It is a gas-water hybrid method that employs the Venturi principle. The ozone venture generates negative pressure by using high-speed water flow through the throat of the mixing tube, resulting in a vacuum state in the suction chamber, and the input gas is sucked into the mixing tube as a result of the pressure differential.
What is a Venturi Injector?
The ozone venturi injector is made of three parts, which is tressurized pipe, the suction chamber, and the nozzle. It is a gas water hybrid approach which use the venturi principle. The ozone venture produce the negative pressure which use the high-speed water flow the throat of the mixing tube, cause the vacuum state of the suction chamber, under the influence of the pressure difference, the input-gas is sucked to the mixing tube.
The water is stir strongly, gas is smashed to the small air bubble, turn into Gas-water emulsion of the mist, finally, be erupt through the spread port of the mixing tube, in continued, begain the Vortex stirring in the next tube, make the gas dissolve in the water.
| Items/Models | A12057 | A25100 | A25152 | A32235 | A48275 | A58295 |
| Length (mm) | 57 | 94 | 150 | 230 | 275 | 290 |
OD of Water Inlet and Outlet | 1/4'' | 1/2'' | 3/4'' | 1'' | 1.5'' | 2'' |
OD of Air Inlet | 1/8'' | 1/4'' | 1/4'' | 1/2'' | 1/2'' | 1/2'' |
Power of water pump (KW) | / | 0.35 | 0.55 | 0.75 | 1.5 | 2.2 |
Input pressure (kg/cm2) | 2-3 | 2-4 | 2-5 | 2-5 | 2-6 | 2-6 |
Output pressure (kg/cm2) | 0-1 | 0-1 | 0-1 | 0-1 | 0-1 | 0-1 |
Air suction capacity (Nm3/hr) | 0.3-0.5 | 4-7 | 7.5-10 | 11-15 | 22-30 | 37-49 |
Dissolved oxygen (kgO2/hr) | 0.1-0.3 | 0.3-0.5 | 0.5-0.7 | 0.8-1.1 | 1.6-2.2 | 2.7-3.5 |
Water flow (m³/h) | 0.05-0.25 | 0.2-1 | 1-3 | 3-10 | 10-25 | 25-50 |
Ozone Generator Features:
1. Innovative Venturi design Innovative design of convergent, throat and divergent sections of Venturi for more injection rate.
2. Additional Valve Provided Additional Valve provided for suction side to prevent reverse flow of water.
3. Additional Fine Suction Filter To avoid entry of solid particles in system, additional suction filter is provided.
4. Various Option Available Venturies are available from ½", ¾", 1", 1¼", 1½", 2"
5. Made of engineering plastic.
6. Excellent chemical resistance to most of the chemicals.
7. Highly efficient and compact differential pressure injection device.
8. Economical and low cost option.
9.Available in ¾", 1", 1¼", 1½" and 2" BSP inlet / outlet connection. Any other size can be supplied on demand.
