Foldable Mini Aluminum Mobile Gantry Crane Adjustable Portable Gantry Crane

Light Duty Aluminum Gantry Crane Adjustable Height and Span

   The PRG model Aluminum gantry crane is a height-adjustable, foldable aluminum gantry crane designed for rapid deployment and is fully portable. Its load lifting capacity is up to 1000kg.

  This mobile gantry crane can be assembled in one minute by one person without any tools and is the perfect solution for confined space access scenarios due to its unique features and ability to lift equipment and personnel.

Model	Load capacity(KG)	Eternalwin                                          Dimension Parameter (mm)										Self weight(KG)
		A	B	C	D	F	G	H	J	K	L
PRGS20	500	2000	2080	1100-1500	1544-2044	1876-2376	1158	2001-2501	2080	420	440	39
PRGS23	400	2300	2380	1200-1800					2380			40
PRGS40	250	4000	4080	2700-3500					4080			46
PRGM20	400	2000	2080	1100-1500	1548-2148	1880-2480	1215	2005-2605	2080			40
PRGM23	400	2300	2380	1200-1800					2380			41
PRGM40	250	4000	4080	2700-3500					4080			47
PRGT20	250	2000	2080	1100-1500	2022-2922	2354-3254	1586	2479-3379	2645			44
PRGT23	250	2300	2380	1200-1800					2380			45
PRGT40	250	4000	4080	2700-3500					4080			50
PRG1S20	1000	2000	2080	1102-1502	1490-1990	1822-2322	1242	1904-2404	2077	464	536	61
PRG1S30	1000	3000	3080	1902-2502					3077			67
PRG1S40	500	4000	4080	1902-3502					4077			73
PRG1M20	1000	2000	2080	1102-1502	1728-2428	2061-2761	1440	2143-2843	2200			65
PRG1M30	1000	3000	3080	1902-2502					3077			71
PRG1M40	500	4000	4080	1902-3502					4077			77
PRG1T20	1000	2000	2080	1102-1502	1969-2869	2301-3201	1639	2383-3283	2830			70
PRG1T30	1000	3000	3080	1902-2502					3077			76
PRG1T40	500	4000	4080	1902-3502					4077			82

 

PG aluminum portable gantry is an independent manual gantry that can be re-positioned within the workshop to suit your operation and it is easy to disassembled and reassembled as and when required.It is configurable with manual and electrically-powered hoists.

Load capacity(KG)	Model	Eternalwin                                           Dimension Parameter (mm)
		Hook height(D)mm	Height gain (E)mm	Total height(F)mm	Overall height(H)mm	Width(G)mm
2000KG (A=3920mm)	S	1495-2245	5x150	2600	1931-2681	1212
	M	2117-2867	5x150	3222	2553-3303	1429
	I	2232-3232	5x200	3587	2668-3668	1726
	T	2747-3947	6x200	4301	3183-4383	1993
	H	3195-4395	6x200	4847	3730-4930	2234
	L	3585-4785	6x200	5347	4230-5430	2557
	K	3686-5286	8x200	5848	4330-5930	2733
	B	3869-5669	9x200	6149	4431-6231	2733
3000KG (A=3920mm)	S	1545-2295	5x150	2698	2029-2779	1212
	M	2167-2917	5x150	3320	2651-3401	1429
	I	2282-3282	5x200	3685	2766-3766	1726
	T	2797-3997	6x200	4399	3281-4481	1993
	H	3245-4445	6x200	4847	3730-4930	2234
	L	3745-4945	6x200	5347	4230-5430	2557
	K	3846-5446	8x200	5848	4330-5930	2733
	B	4029-5829	9x200	6231	4513-6313	2733
5000KG (A=3920mm)	I	2143-3143	5x200	3592	2717-3717	1736
	T	2838-4038	6x200	4487	3412-4612	2059
	H	3289-4489	6x200	4938	3862-5062	2234
	L	3789-4989	6x200	5438	4362-5562	2557

Application

Other model aluminum gantry crane(Can be customized)

This crane is mainly designed for material handing work in the assembling workshop,machining workshop,mold assembly,research laboratory,maintenance,small cargo terminal,warehouse,car repair center,etc.

.

Best quality spare parts:

Drawing:

1. once the crane has been shipped to the destination,check according to the packing list to see if any damages or deforms.If yes,try to repair it.
2. The installation floor should be stable and smooth.

1. Assemble the two side leg and ground beam properly on the floor.
2. Brake the wheel and lift the end of the leg to 60 degree.Lift one side of the beam.Join the flanges.
3. Assemble the flanges by high-strength bolts,spacers and spring washer.Fasten those parts.
4. Lifting the finished beam and lay to the other side legs.Repeat the step 3.
5. Assemble the hoist to the beam and make the hoist is safe and workable.
6. Install the festoon system if the hoist is electrical type.
7. Install the electrics between the motors and electrical box.Till now,the installation is finished.

1. Assemble the two sides legs and them the ready.
2. Brake the wheels.Put the 2 legs parts to proper position according to the beam length.
3. Put the beam to the proper position and match the flanges between the beam and leg.
4. Assemble the flanges by the high-strength bolts,spacer,spring washer and nuts.Fasten those parts.
5. After assembling,lift the whole crane to up strait by worker or by lifting equipment.
6. Install the hoist to the beam.
7. Install the festoon system and electrics if the hoist is electrical type.

   Details images

8. Weld:align precision parts and welded components for installation. Convenient operation, stable performance, long service life.
9. Girde:we only use I - beam of standard quality, product quality is guaranteed.
10. Screw and nut:all nuts and bolts are made of 8.8 grade high strength steel, plated with corrosion-resistant paint to enhance the service life of the products.
11. Casters:All our gantry cranes are heavy-duty casters with long service life and smooth rolling performance. Even on rough floors it doesn't affect use.
12. Customization:outdoor use options that can add rain cover and change surface paint with stainless steel motor design.
13. 

    If the common size is not suitable for you, pls provide us the detailed data titled,

14. including the span,
15. the rated load,
16. the lifting height
17. and the other technical parameters( the other data in the table).