Audited Supplier
| Structural Characteristics | manufacturing process | performance parameter |
| presentation | presentation | presentation |
| Flange plate | It is usually circular, and its diameter is determined according to the size of the connected pipeline. There are several bolt holes evenly distributed on it, which are used to install bolts to achieve a firm connection. | Selection of raw materials | Materials such as carbon steel, stainless steel, and alloy steel are often selected. The material selection must strictly comply with relevant standards and design requirements to ensure the quality and service life of the flange. | Pressure grade | Commonly, there are pressure grades such as PN0.25MPa, PN0.6MPa, PN1.0MPa, PN1.6MPa, PN2.5MPa, PN4.0MPa and so on. |
| Sealing surface | Common types include flat face (FF), raised face (RF), etc. The flat sealing surface has a simple structure and is easy to process, but its sealing performance is relatively weak. It is suitable for working conditions with low pressure and non - toxic and harmless media. The raised face sealing surface has a boss added on the basis of the flat face, so it has better sealing performance and is suitable for medium - and low - pressure working conditions. | Forging or casting | The main methods for manufacturing the blank are forging and casting. Forging can improve the mechanical properties of the material, making the flange have better strength and toughness, but the cost is relatively high. Casting has high production efficiency and low cost, but the internal quality of the product is relatively poor. | Dimension specification | It is determined according to the nominal diameter (DN) and nominal pressure (PN) of the pipeline. The national standards have clear regulations on its dimensions, the number and diameter of bolt holes, the thickness of the flange, etc. |
| Welding groove | The welding end is usually designed with a welding groove. Common forms include V-shaped, U-shaped, etc. The form and size of the groove vary according to different welding methods and pipeline materials, with the aim of ensuring the welding quality | Machining | After the blank is forged or cast, it is necessary to carry out machining operations such as turning, milling, and drilling to meet the specified dimensional and precision requirements. During the processing, the technological parameters should be strictly controlled to ensure dimensional accuracy and surface quality. | Sealing performance | Its quality depends on factors such as the form of the sealing surface, the material of the gasket, and the installation quality. Good sealing performance can prevent the leakage of the medium and ensure the safe operation of the pipeline system. |
Dingxiang Jinyu Forging Co., Ltd. is located in Dashagou Village, jiangcun Township, Dingxiang County, Xinzhou,known as the "hometown of Chinese forging", with a registered capital of 5 milion yuan. Superior geographical location, 100 kilometers away from the provincial capital Taiyuan, with convenient and fast road and railway transportation. Rich in coal, electricity, and iron resources, we are a professional manufacturer of forged fanges and pressure vessel forgings; We have the ability to integrate design, raw material procurement, cutting, forging, heat treatment, machining, mechanical testing, non-destructive testing, mechanical typing, painting, packaging, and shipping operations. The annual production capacity is over 10000 tons, with specifications ranging from DN15 to DN6000mm. The maximum weight per unit of finished products is 20 tons, and the pressure ranges from 150-2500 pounds, including national standards, American standards, British standards, German standards, Japanese standards,and non-standard fanges and forgings.
The main materials used in production include high-quality carbon structural steel, low-alloy high-strength steel heat-resistant steel, and various types of stainless steel (carbon body, austenite, matensite, dispersion hardening,duplex stainless steel)
The company covers an area of over 10000 square meters and currently has 105 fixed emplovees, including 8 management personnel with high school education or above. The organizational chart is detalled in the attached table. The company has a cuting workshop, forging workshop, machining workshop, and packaging workshop. Raw material warehouse, semi-finished product warehouse, finished product warehouse.
Q1: Can l obtain samples?
Yes.
Q2: Can l use my own logo or design on the product?
Yes, we provide OEM/ODM services; Your logo and design can be made on the product.
Q3: Do you have a factory?
Yes, we have a factory in Shanxi. Welcome to visit our company and factory. We are a professional manufacturer that provides OM/ODM services to our customers.
Q4: What is the production capacity of your factory?
Our production capacityis equivalent to 2000 tons per month.
Q5: When will the shipment be made?
All of our products are in stock and will be shipped within 5 days. We can deliver 2000 pieces within 7 days.
