JIS SUM24L | DIN 1.0718 | ASTM 12L14 Cold Drawn Steel
Quick Details
1: 12L14 steel introduction
12L14 is easy cutting structural steel, easy cutting steel is easy to be (turning, milling, drawing, planing, drilling, etc.) cutting processing steel, also known as automatic machine tool processing steel, referred to as automatic steel. It is produced to adapt to machining automation and flow line production.
2: 12L14 steel equivalent
Country China Japan Germany USA UK Standard GB JIS DIN (W-Nr.)
EN 10277
AISI/ASTM
BS
970-3-1991
Grade SUM24L 1.0718 12L14 3: 12L14 steel chemical composition
Grade C Si Mn P Pb 1.0718 0.14 0.05 0.90-1.30 0.11 0.20-0.35 12L14 0.15 0.26-0.35 0.85-1.15 0.04-0.09 0.15-0.35 4: 12L14 steel mechanical properties
The mechanical properties mainly include tensile strength, yield strength, elongation, area or reduction, hardness, impact value, non-metalic inclusion etc. Different heat treatment, the mechanical properties will be different, such as normalized, tempered, QT. If you want to know the properties, kindly contact the salesman.
5: 12L14 steel overviews
Size Round Dia 6-1200mm Plate/Flat/Block Thickness
6mm-500mmWidth
20mm-1000mmHeat treatment Normalized ; Annealed ; Quenched ; Tempered Surface condition Black; Peeled; Polished; Machined; Grinded; Turned; Milled Delivery condition Forged; Hot rolled; Cold drawn Test Tensile strength, Yield strength, elongation, area of reduction, impact value, hardness, grain size, ultrasonic test, US inspection, magnetic particle testing, etc. Payment terms T/T;L/C;/Money gram/ Paypal Trade terms FOB; CIF; C&F; etc.. Delivery time 30-45 days Application 12L14 is mainly used for making instruments and meters, watch parts, automobiles, machine tools and other machines with small stress and strict requirements on size and finish. Standard parts with strict requirements for dimensional accuracy and smoothness and relatively low requirements for mechanical properties, such as gear, shaft, bolt, valve, bushing, pin, pipe joint, spring seat and machine tool lead screw, plastic molding die, surgical and dental appliances, etc. 7: Delivery condition
For hot forged bar, usually the delivery condition is hot forged, annealed/QT, rough turned/Black surface.
For hot rolled bar, usually the delivery condition is hot rolled, annealed/QT, Black surface.
For hot forged block, usually the delivery condition is hot forged, annealed/QT, milled surface/Black surface
For hot rolled plate, usually the delivery condition is hot rolled, annealed/QT, black surface.
For cold drawn bar, usually the delivery condition is cold drawn, annealed/QT, peeled/black surface

1: Main Product:
GB GB/T 1299 | JIS JIS G4404 | DIN (W-Nr.) DIN EN ISO4957 | AISI/ASTM ASTM A681 | BS BS 4659 |
Cold Work Tool Steel | ||||
Cr12 | SKD1 | 1.2080/X210Cr12 | D3 | |
Cr5Mo1V | SKD12 | 1.2363/X100CrMoV5 | A2/T30102 | BA2 |
Cr12MoV | 1.2601 | D5 | ||
Cr12Mo1V1 | SKD11 | 1.2379/X153CrMo12 | D2 | |
X210CrW12 | SKD2 | 1.2436 | D6 | |
9CrWMn | SKS3 | 1.2510/100MnCrW4 | O1 | |
9Mn2V | 1.2842 / 90MnCrV8 | O2 | B02 | |
5CrNiMo | SKT4 | 1.2713 | L6/T61206 | BH224/5 |
Hot work Tool Steel | ||||
1.2355/50CrMoV13-15 | S7/T41907 | |||
5CrNiMoV | 1.2714 | 6F3 | ||
5CrNi4Mo | 1.2767 | 6F7 | ||
SKD7 | 1.2365/32CrMoV12-28 | H10/T20810 | BH10 | |
4Cr5MoV | SKD6 | 1.2343/X37CrMoV5-1 | H11/T20811 | BH11 |
4Cr5MoSiV1 | SKD61 | 1.2344/X40CrMoV5-1 | H13 | |
SKD62 | 1.2605/X35CrWMoV5 | H12/T20812 | BH12 | |
3Cr2W8V | SKD5 | 1.2581 | H21 | |
Plastic Mould Steel | ||||
3Cr2Mo | 1.2311 | P20 | ||
NAK80 | 1.2312 | P20+S / P21 | ||
3Cr2MnNiMo | 1.2738 | P20+Ni / 718 | ||
4Cr13 | SUS420J2 | 1.2083 | 415 | |
3Cr17+S | SUS420F | 1.2085 | ||
3Cr17Mo | SUS420J | 1.2316 | ||
Engineering Steel | ||||
GB GB/T 699 | JIS JIS G4051 | DIN (W-Nr.) EN 10083-2 | AISI/ASTM ASTM A20 | EN / BS |
1018 | EN2C | |||
20 | S20C | C20/1.1151 | 1020 | EN3B /070M20 |
S35C | C35 | 1035 | ||
1040 | EN8/080M40 | |||
45 | S45C | C45/1.1191 | 1045 | EN8D/C45E |
50 | S50C | 1050 | ||
S55C | 1055 | EN9/070M55 | ||
Q345 | S355/ST52-3/1.1170 | EN14/150M19 | ||
GB GB/T 3077 | JIS JIS G4105/JIS G4103 | DIN (W-Nr.) EN 10250 | AISI/ASTM ASTM A29 | BS BS 970 |
40Cr | SCr440 | 41Cr4(1.7035) | 5140 | |
SCM420 | 18CrMo4/1.7243 | 4118 | ||
30CrMo | SCM430 | 25CrMo4/1.7218 | 4130 | 708A25/708M25 |
42CrMo | SCM440 | 42crmo4/1.7225 | 4140 | EN19/709M40 |
4145 | ||||
4330 | ||||
40CrNiMoA | SNCM 439/SNCM8 | 36CrNiMo4/1.6511 | 4340 | EN24/817M40 |
40NiMoCr10-5/1.6745 | EN26 | |||
34CrNiMo6 / 1.6582 | 4337 | |||
30CrNiMo16-6/1.6747 | EN30B/835M30 | |||
32CrMo12/1.7361 | EN40B/722M24 | |||
SCM415 | 16MnCr5 / 1.7131 | 5115 | ||
15CrNi6/1.5919 | 3115 | |||
16NiCr4/1.5714 | EN351/635M15 | |||
4615/4617 | EN34/665M17 | |||
14NiCr4/1.5752 | 3310/3415 | EN36/655M13 | ||
15NiCrMo16-5/1.6723 | EN39/835M15 | |||
18CrNiMo7-6 (1.6587) | 4815 | |||
SNCM220 | 1.6523/21NiCrMo2 | 8620 | 805M20 | |
20CrNiMo5 | EN353 | |||
GCr15 | 52100/1.3505 | EN31/535A99 | ||
Stainless Steel | ||||
SUS440C | X105CrMo17/1.4125 | S44004/440C | ||
Wear-resisting Steel | ||||
GB | JIS | DIN (W-Nr.) | AISI/ASTM | SSAB |
NM400 | HB400 | |||
NM500 | HB500 | |||
Spring Steel | ||||
GB | JIS | DIN (W-Nr.) | AISI/ASTM | SSAB |
65MN | 1066 | |||
60Si2Mn | SUP6 | 60Si7 | 9260 | |
60Si2MnA | SUP7 | 60Si7 | 9260 | |
55CrMnA | SUP9 | 55Cr3 | 5155 | |
60CrMnA | SUP9A | 5160 | ||
50CrVA | SUP10 | 51CrV4 | 6150 | |
High Speed Steel | ||||
GB | JIS JIS G4403 | DIN (W-Nr.) DIN EN ISO 4957 | AISI/ASTM ASTM A600 | BS BS 4659 |
SKH51 | 1.3343 | M2 | ||
SKH55 | 1.3243/HS6-5-2-5 | M35 | ||
SKH59 | 1.3247/HS2-9-1-8 | M42 | ||
SKH2 | HS18-0-1/1.3355 | T1 | ||
SKH3 | S 18-1-2-5/1.3255 | T4/T12004 | ||
SKH4 | 1.3265/S18-1-2-10 | T5/T12005 | BT5 | |
All kinds of forging parts according to Drawing |
2: Qilu steel overviews
Size | Round | Dia 8-1200mm |
Plate/Flat/Block | Thickness 10mm-800mm | |
Width 20mm-2000mm | ||
Heat treatment | Normalized ; Annealed ; Quenched ; Tempered | |
Surface condition | Black; Peeled; Polished; Machined; Grinded; Turned; Milled | |
Delivery condition | Forged; Hot rolled; Cold drawn | |
Test | Tensile strength, Yield strength, elongation, area of reduction, impact value, hardness, grain size, ultrasonic test, US inspection, magnetic particle testing, etc. | |
Payment terms | T/T;L/C;/Money gram/ Paypal | |
Trade terms | FOB; CIF; C&F; etc.. | |
Delivery time | 30-45 days |



Hunan Qilu Industrial Co., Ltd were already engaged in exporting steel for 11 years, could supply a great variety of hot forged, hot rolled and cold drawn Steels, including engineering steel, cold work tool steel, hot work tool steel, plastic mold steel, spring steel, high speed steel, stainless steel etc., besides Qilu Industrial also has their own heating treatment shop and machining shop to provide heating and cutting service.
Since 2008 year, Hunan Qilu Industrial has the right to export all FORGED STEEL behalf of Qilu Speical Steel Co.,ltd which is specialized in smelting and forging of special steel since 1965 year, now Qilu special steel is one of the biggest manufacturer of forged product in China.The forged products are used in Automotive, Aerospace, Power Generation, Oil & Gas, Transportation and Industrial. We already set up the warehouse in Wuxi and Dongguan city, more than 20000 tons ex-stock could be supplied with kinds of size.
Qilu Industrial is the professional one-stop steel manufacturer, stockist and exporter in China, our customers spread all over the world, include West Europe, North America, South America, Asia, Middle Asia, Africa, Australia, etc.


The main forging equipments mainly include:3 sets of 5t electro-hydraulic hammers, 1 set of high-speed forging units of 800t,1600t,2000t and 4500t respectively.




Hunan Qilu Industrial CO., LTD