Audited Supplier
SINO-TECH
Professional Manufacturer of Servo Type Automatic Plastic Injection Molding Machine
SERVO ENERGY SAVING PET PREFORM INJECTION MOLDIINIG MACHINE
Main Features
1. 30% higher energy saving than using traditional variable pump.
2. Stable and smooth movement supported by AC servo motor.
3.Effective reduction of energy consumption due to reduced oil.and cooling water attained by hydraulic system.
4. High performance European B&R control system.
We are professional plastic injection molding machine manufacturer for all kinds of plastic products, Clamping force from 70 to 1600Ton, injection weight from 50 to 10000g. Also we have CE and ISO certification.
| Item | 260SElll | |||
| Screw diameter | mm | 55 | 60 | 70 |
| Theoretical shot volume | cc | 713 | 848 | 1155 |
| Shot weight (PS) | g | 649 | 772 | 1051 |
| Shot weight (PS) | oz | 22.9 | 27.3 | 37.1 |
| Length/Diameter ratio | L/D | 22.9 | 21 | 18 |
| Injection pressure | MPa | 211 | 178 | 131 |
| Injection rate | cm³/sec | 237 | 282 | 384 |
| Injection stroke | mm | 300 | ||
| Max. Screw speed | rpm | 175 | ||
| Plasticizing capacity (PS) | g/s | 32.3 | 35.2 | 52.9 |
| Injection unit force | Ton | 9.1 | ||
| Carriage stroke | mm | 350 | ||
| Clamping force | Ton | 260 | ||
| Max. daylight | mm | 1210 | ||
| Clamping stroke | mm | 600 | ||
| Distance btwn. Tie bars | mm | 580*580 | ||
| Min mould dimension | mm | 400*400 | ||
| Mould thickness range | mm | 195-610 | ||
| Ejector force | Ton | 11.1 | ||
| Ejector stroke | mm | 180 | ||
| No. of ejector pins | unit | 13 | ||
| Max. motor power | kW | 26.7 | ||
| System pressure | MPa | 17.5 | ||
| Hydraulic pump capacity | L/min | 172 | ||
| No. of heater zones | unit | 5+1 | ||
| Heater input power | kW | 18.9 | ||
| Ultimate capacity | kw | 46.6 | ||
| Current | A | 63.7 | ||
| Net weight | Ton | 8.55 | ||
| Oil filling capacity | L | 480 | ||
- Optimised platen design to disperse stress
- Accurate pause and smooth and speedy movement supported by strengthenedtoggle
- High pressure lubrication system adopted in clamping unit to support machine protection during high speed productior
-The toggle's special heat-treated steel case enables higher wear resistance -High-rigidity frame supports smooth movementugh optimised clamping structure
-Optimised platen design to disperse stress
- Accurate pause and smooth and speedy movement supported by strengthened toggle
- High pressure lubrication system adopted in clamping unit to support machine protection during high speed production
- The toggle's special heat-treated steel caseenables highe wear resistance -High-rigidity frame supports smooth movement
02-Injection Unit-Diagonally located cylinders to facilitate better stress distribution
-Linear quide rail significantly reduces mechanical wear and tear
03 Hydraulic System- Minimised energy loss attained through the advanced hydraulic pipeline design
- Low-noise
S09 Smart Control System- Parameter data statistics for quality control -Auto control of temperature by PID - Mould parameter can be stored in USB devices and used in another injection moulding machine
- Remote motoring of parameter and operation sequence byMODEM or Ethernet -Multi-language selection
Q1: Are you a trading company or a manufacturer?
A1: We are a manufacturer, we supply the factory price with good quality, welcome to visit !
Q2:How about quality control in your factory?
A2: We have a pre-shipment inspection team, every machine need at least automatic running over 72 hours before shipment.
Q3: Is there complete machine include mould and other auxiliary equipment ?
A3: Yes ,what we are provide is the complete A-Z solution line.
Q4: Could you send your engineer to my country, to start the machine?
A4: Surely, we have experience technical engineer for oversea service, they would help you install machine, training your workers.
Q5: Can you help us with the shipment of this machine ?
A5: We have our special shipment company which already cooperate
for long time, we will give you the best price, fast delivery.
