Audited Supplier
1. Machine's Introduce
Nail making machine adopts plunger type structure to ensure its high working speed, low noise and low impact characteristics. It has wide uses, simple operation, and reliable working condition. The raw material can be waste scrap or new wire rod. The nail point and the nail head can be formed at one time with a high efficiency.
2. Especially it can make excellent quality YouMao nail and other special-shaped nail, which are suitable for high-speed studs for welding machine and nail gun.
Model | Diameter of nails | Length of nails | Designed speed | Motor | Dimension | Weight |
Z94-1C | 0.9-16.mm | 9-25mm | 450pcs/min | 1.5kw | 1.5*1.3*1.1m | 1.2tons |
Z94-2C | 1.2-2.8mm | 16-50mm | 380pcs/min | 2.2kw | 1.7*1.3*1.4m | 1.45tons |
Z94-3C | 1.8-3.5mm | 30-75mm | 320pcs/min | 3kw | 2.0*1.4*1.4m | 1.8tons |
Z94-4C | 2.8-4.5mm | 50-100mm | 260pcs/min | 4kw | 2.2*1.6*1.6m | 2tons |
Z94-4C(2) | 2.8-5mm | 50-120mm | 260pcs/min | 4kw | 2.3*1.6*1.3m | 2.1tons |
Z94-5.5C | 3.8-5.5mm | 75-150mm | 220pcs/min | 5.5kw | 2.5*1.8*1.5m | 2.3tons |
Z94-6C | 4-8mm | 80-200mm | 180pcs/min | 11w | 3.4*1.9*1.5m | 3tons |
1.Multi drums wire drawing machine
High-Speed pulley type continuous wire drawing machine has the characteristics of simple structure, low cost, and easy operation.
Main parameters| Model | LW6/650 | LW-6/560 | LW7/450 | LW-6/350 |
| Max inutput dia | 8mm | 6.5mm | 3.4mm | 2.5mm |
| Min output dia | 2.5mm | 2mm | 1mm | 0.75mm |
| Max verage | 1-6/650 | 1-6/560 | 1-7/450 | 1-6/350 |
| Condensation | 30% | 30% | 20% | 21% |
| Total conde | 75-85% | 78-88.5% | 77.9% | 78% |
| Max speed | 200m/min | 245m/min | 346.9m/min | 200m/min |
| Total power | 22KW | 18.5-22KW | 15KW | 7.5-11KW |
| Weight | 2500KG | 2000KG | 1500KG | 1000KG |
| Size | 1.9x1.3x2.3m | 1.8x1.15x2.2m | 1.52x1x2.1m | 1.4x0.8x1.8m |
If the diameter of wire is thick before it entering the nail making machine, this machine can reduce the diameter of wire, then the user can get the diameter that you need.
Model No. | Ls-Single wire drawing machine |
Max diameter | 6.5mm |
Minimum diameter | 2.0mm |
Motor Power | 11kw |
Drawing speed | 56m/min |
Overall size | 2.5*1.3*1.0m |
Weight | 1.0tons |
Model No. | Pointing rolling machine |
Rolling pointed range | ≤8mm |
Motor power | 3KW |
Overall size | 1.2*0.6*1.0m |
Weight | 80kg |
Function:This is pointing rolling machine, to sharpen the head of the wire, then it can enter the wire drawing machine. | |
Model No. | Butt welding machine |
Butt weld range | φ3-φ8mm |
Voltage | 380V 50HZ |
Weight | 50kg |
Function:This is butt welding machine, to weld two wires coil together. When one wire coil finish drawing, this machine can connect the next wire coil to continue to be drawn by the wire drawing machine. | |
Xuchang Huarui Machinery Co., Ltd. Was established in 1990, mainly engaged in the R& D and manufactures nail and screw making machine, waste tire recycling machine and auxiliary equipment.
After years of pragmatic innovation, exploration and development, Xuchang Huarui Machinery Co., Ltd. Has developed from a small machinery factory into a large-scale and well known machinery company.
Our main products are full automatic screw making machine,nail making machine, cap making machine,wire mesh machine, wire drawing machine,polishing machine,twisting machine, welding machine,chain link fence thread rolling machine,bolt former , colder former and auxiliary equipment. As a professional machinery company, we always devote to produce best products and provide excellent service for customers. The satisfaction of clients and good reputation is our highest pursue.
We stick to the principle of "Quality First, Customer Uppermost".Hope to establish cooperationwith you!
1. Make response to customer's inquiry or requirement within 24 hours.
2. Assist customer to select the most suitable machine and give them our professional suggestion.
3. Produce machine by our experienced team according to customer requirement.
4. Provide customer operation manual or video for machine to help them operate machine more efficiently.
5. Provide customer layout of workshop with machine to help them install machine.
6. Assign engineer to assist customer to install machine.
7. Offer 2 year guarantee for our machines.
