Audited Supplier
Gains Wetbulb Cooling Towers Wholesaler Fiberglass Cooling Tower China Industry Open Type Square Water Cooling Tower 
FRP Square Cooling Tower Has The Characteristics Of Good Thermal Performance, Low Power Consumption, Good Stability Of The Whole Tower, Beautiful Appearance, Low Noise, Short Construction And Installation Period, And Low Cost. It Is Widely Used In Petroleum, Chemical, Metallurgy, Power Generation, And Other Enterprises With Large Water Volumes. In The Circulatory System.
How A Cooling Tower Works.
Square Cooling Towers Use Water As The Circulating Coolant, Absorbing Heat From The System And Releasing It To The Atmosphere To Lower The Water Temperature. Its Working Principle Is To Use The Working Circulating Water To Exchange Heat With The Air, And The Steam Will Volatilize And Take Away The Heat, So As To Achieve The Purpose Of Reducing The Water Temperature And Cooling. In The Process Of Circulating Water And Air Exchange, The Water Is Affected By The Nozzle And Gravity, And The Fluid Moves From Top To Bottom With A Constant Flow Direction
Cooling Tower Composition
2. Air Duct: The Whole Tower Is Made Of Fiberglass Material With Kinetic Energy Recovery Type Air Duct. The Air Duct Makes Full Use Of The Theory Of Uniform Gas Flow And Is Designed In Combination With Engineering Practice And Measured Data.
3. Fan: The Fan Has Reasonable Aerodynamic Force, Large Air Volume, High Efficiency, Low Noise, And Corrosion Resistance.
4. Reducer: Horizontal Type, Low Noise, High Efficiency, Reliable Oil Lubrication, Easy Maintenance, And Oil Temperature And Vibration Alarm Devices.
5. Motor: There Are Two Kinds Of Explosion-Proof And Non-Explosion-Proof.
6. Packing: PVC Packing Has The Characteristics Of Good Hydrophilic And Oil-Increasing Performance, Large Heat Dissipation Coefficient, And Resistance To Temperature Changes.
7. Water Distribution System: Tubular Water Distribution, Using Multi-Layer Flow Nozzles
8. Water Eliminator: When Running At High Speed, The Amount Of Floating Water Is Less Than 0.01%
1. Space-Saving, Light-Weight Structure Adopt High-Efficiency Heat Exchange Packing Specially Designed For This Series Of Cooling Towers, Its Heat Exchange Area Is Greatly Increased, And Its Floor Area Is Greatly Reduced
2. To Save Electricity, The Filler With Small Ventilation Resistance And High-Efficiency Fan Are Used To Reduce The Power Of The Motor Used, And The Power Of The Motor Used In The Ultra-Low Noise Type Is Smaller, Which Saves More Electricity
3. The Operation Noise Is Extremely Low, Which Fully Meets The Requirements Of Environmental Protection
4. Good Corrosion Resistance, The Tower Body, Water Tank, And Panels Are All Made Of FRP Material With Good Corrosion Resistance
5. Convenient Combination The Combination Method Can Be Used To Meet The Requirements Of Different Working Conditions. The User Can Also Decide on The Combination According To The Site Conditions And Can Adjust The Appearance Of The Cooling Tower According To The User'S Building Characteristics. If The User Space Is Very Limited
1. Open Cooling Tower: In The Tower, The Hot Water Is Sprayed Into Water Droplets And Water Films Through The Water Distribution System. The Water Flows From Top To Bottom In The Filler, And The Air Flows From Bottom To Top Or Horizontally In The Filler. According To The Direction Of Water Flow And Air Flow, The Equipment That Takes Away The Waste Heat In The Water Is Divided Into Cross-Flow And Counter-Flow Cooling Towers.
2. Cross-Flow Square Cooling Tower: Hot Water Passes Through The Filler From Top To Bottom, Air Passes Through The Filler From The Horizontal Direction, And The Flow Direction Of Hot Water And Air Is Close To 90 ° Cooling Tower (Some Manufacturers Call It Vertical Or Orthogonal Type Cooling Tower).
| Product Name | FRP Rectangle Cooling Tower |
| Keywords | FRP Square Cooling Tower |
| Description | industrial FRP Cooling Tower |
| Function | Water Cooling |
| Model | Counter-Flow |
| Cooling Type | Cross Flow |
| Voltage | 220V-480V |
| Dimension(L*W*H) | 3000*5080*4810mm Or Customized |
| Certifications | CTI&ISO&CE |
| Cooling Capacity | 350m3/h |
| Foundation drawing | Provide |
| Marketing Type | Ordinary Product |
| Color | White Or Customized |
| Power | Depending on Models |
| Capacity | 10-1000m3/H Per Cell |
| Model | Air vol. (m3/h) | Dia. of fan (mm) | Power (KW) | Total height (mm) |
| GBNL3-100 | 71300 | 2400 | 3.0 | 3553 |
| GBNL3-200 | 141300 | 3400 | 5.5 | 4223 |
| GBNL3-300 | 212000 | 3800 | 11.0 | 4618 |
| GBNL3-400 | 282800 | 4200 | 11.0 | 5219 |
| GBNL3-500 | 353200 | 5000 | 15.0 | 5589 |
| GBNL3-600 | 381400 | 5000 | 18.5 | 6089 |
| GBNL3-700 | 495500 | 6000 | 22.0 | 6040 |
| GBNL3-800 | 507600 | 6000 | 30.0 | 6540 |
Q1: Why Choose Gains Trade?
A1: 15+ Years Experience In FRP Industries, Have Rich Experience That Provides Different FRP Products To Fluor, Technip, Dossan, Arkema, Veolia, Wison, Dupont, Etc.
Q2: Can You Choose The Correct Raw Material For Our FRP Product?
A2: Absolutely, Pls Provide Medium & Concentration, Temperature, Pressure, Etc Technical Parameters, PP/FRP, PVC/FRP, PVDF/FRP, Etc Pipe/Tank/Tower Also Are In Our Supply Scope.
Q3: What's Your Delivery Time?
A3: We Have Several Manufacturing Plants, And Each Plant Has A Design Department And Production Facilities, We Can Finish Your FRP Products In The Shortest Time.
Q4: Which Port Is Nearest To Your Plant?
A4:From From Our Plant To Tianjin Seaport Is 300 km, To Shijiazhuang/Jinan Airport Is 150 km, And To Hengshui, High-Speed Train Station Is 30 km.
Q5:How Can We Guarantee The Quality?
A5:Always A Pre-Production Sample Before Mass Production;
Always Final Inspection Before Shipment;
Q6:Are You A Manufacturer Or A Trading Company?
A6:We Are A Manufacturer, Providing OEM & ODM Services
