Audited Supplier
TCL-K
12months
Manual Powder Coating Machine
Manual Powder Coating Gun
Digital Display
Express/Air Transport/Land Transpor/Ocean Shipping
Shipped in 5 Days After Payment
Electrostatic Spraying Equipment
Hardware Spraying Equipment, Metal and Glass Spraying Equipment
Powder
CE
Manual
New
Online
Customized/Galin
Carton, High-Strength Cardboard
Normal
Shandong, China
8424909000
Product Description
| Galin powder coating/spray/paint mother board/ printed circuit board/PCB (TCL-K ) |
| it is suitable for all Galin powder coating gun |
| GALIN POWDER COATING PCB OF MACHINE (TCL-K) ELECTRICAL DATA | |
| Nominal input voltage | 220V (100V-240VAC) |
| Frequency | 50/60 Hz |
| Input power | 40 VA |
| Rated output voltage(to gun) | 12~18VPP |
| Rated output frequency(to gun) | About20KHZ |
| Protection type | IP54 |
| Temperature rang | +10ºC to +40ºC (+50ºF to +104ºF) |
| Solenoid Valve Voltage | 24VDC |
| Gun output voltage | 0-100KVDC |
| Gun output current | 0-100μA |
| ADVANTAGE OF POWDER COATING PCB (TCL-K) |
Ideal for good coating grooves and corners.
It has three modes - FLAT MODE,CORNER MODE,RE-COAT MODE.
Powder ascending rate reach up to 65%~85% with long service life.
That is more convenient to operate after the selected mode.
| APPLICATION AREA OF POWDER COATING PCB(TCL-K) |
It has a wide range of applications, such as Hub,Rail,Cup,etc.
All METAL and GLASS can be coated with powder
All within your eyes can be coated by powder
Galin powder coating PCB(TCL-K) can be used for Hub
Galin powder coating PCB(TCL-K) can be used for Furnitur
Galin powder coating PCB(TCL-K) can be used for Metal Rail
Galin powder coating PCB(TCL-K) can be used for Metal products
Galin powder coating PCB(TCL-K) can be used for Glass products
Galin powder coating PCB(TCL-K) can be used for Metal or Glass Cup
Galin powder coating PCB(TCL-K) can be used for Any Metal or Glass you want
Galin Manual powder coating PCB(TCL-K) can be used for Grooves and Corners
Galin Manual powder coating PCB(TCL-K) can be used for Complex and Difficult Workpiece
| ATTENTIONS OF POWDER COATING MACHINE AND PCB |
CLEANING AND MAINTENANCE
Daily Maintenance
1. Clean the injector
2. Clean the powder gun
3. Clean the powder hose and suction unit
Weekly Maintenance
1. Clean suction unit,injector,Powder Clean module and powder gun
2. Check the control unit grounding connections to the coating booth bolts,
the suspension devices of the work pieces,or the conveyor.
TROUBLESHOOTING GUIDE
If the powder gun does not spray powder although the control unit is switched on,then the injector can be dirty or clogged.
| Error/cause | Troubleshooting |
| Injector nozzle, non-return valve unit, powder hose or powder gun are clogged | Clean the corresponding parts and if necessary,replace them |
| Conveying vacuum too low | Increase the powder quantity and/ or total air volume on the control unit |
| Insert sleeve worn , not or incorrect inserted | Replace or insert it ,observe the indexing cam |
| Insert sleeve is worm after a short operating duration | Clean the nozzle ,if damaged,replaced it |
| The gun does not spray powder although the control unit is switched on and the gun trigger is pressed | 1.Connect the equipment to the compressed air 2.Clean /Replace 3.Clean the corresponding 4.Contact Galin representative |
| COMPANY INFORMATION OF GALIN |
Weifang Galin Powder Coating Equipment CO.,LTD
We located in Shandong district,specializes in manufacturing the coating equipment .
We are a Chinese supplier and specialize in the research, development and production of the powder coating system and liquid painting system over 8 years with high quality and reasonable price.OEM order and customized design available.
Mainly products: Vibratory Box Feed Coating Machine, Fluidizing Hopper Coating Machine,Powder gun, high voltage cascade, PCB, Powder injector, Spray Nozzle, etc.
In addition,we can make all kinds of high voltage cascade, provide perfect substitutes for well-known brand spare parts.
We not only supply the high-quality coating equipment,but also the best service.
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us.
