Audited Supplier
| Model of Power Tiller | Unit | GN-12L | GN-15L | |
| Structure weight | Without rotavator | kg | 350 | 360 |
With rotavator | 460 | 470 | ||
| Working weight (with rotavator) | kg | 503 | 513 | |
| Turning speed of rototilling shaft | rpm | 199/250 | ||
| Overall dimensions (LxWxH) | mm | 2950 x 980 x 1240 | ||
Number of blades | PCS | 18/20 | ||
Rototilling width | mm | 600 | ||
| Type of tractor | Single axle, dual-purpose for both traction & drive | |||
| Travelling speed | Forword | Km/h | 1.41, 2.51, 4.21, 5.22, 9.27, 15.56 | 1.55, 2.76, 4.63, 5.74, 10.19, 17.11 |
Reverse | 1.11, 4.12 | 1.22, 4.53 | ||
Type size |
| 6.00-12 | ||
Wheel track | mm | 810, 750, 690, 570(normally use 810) | ||
Min. ground clearance | mm | 210 | ||
Min. turning radius | m | 1.1(with no rotavator) | ||
Model of engine |
| ZS195N | ZS1100N | |
Type of engine |
| Horizontal 4-stroke | ||
Bore x stroke | mm | 95×115 | 100×115 | |
Total displacement | L | 0.815 | 0.903 | |
Compression ratio |
| 20:1 | 20:1 | |
Turing speed of crankshaft | rpm | 2000 | 2200 | |
1-hour rated output | KW/hphp | 9.7/13.2 | 12.13/16.5 | |
12-hour rated output | KW/hp | 8.82/12 | 11.03/15 | |
Specific fuel consumption | g/kw.h | ≤245 | ≤245 | |
Specific lube oil consumption | g/kw.h | ≤2.00 | ≤2.04 | |
Cooling mode |
| Condenser (Radiator) | ||
Main farm implements (optional) | Anti-skid steel wheel Model 100-680 | |||
| Model of Power Tiller | Unit | DF-12L | DF-15L | |
| Structure weight | Without rotavator | kg | 353 | 363 |
With rotavator | 458 | 468 | ||
| Working weight (with rotavator) | kg | 493 | 508 | |
| Turning speed of rototilling shaft | rpm | 188/300 | ||
| Overall dimensions (LxWxH) | mm | 2680 x 960 x 1250 | ||
Number of blades | PCS | 18 | ||
Rototilling width | mm | 600 | ||
| Type of tractor | Single axle, dual-purpose for both traction & drive | |||
| Travelling speed | Forword | Km/h | 1.4,2.5,4.1,5.3,9.4,15.3 | |
Reverse | 1.1, 3.8 | |||
Type size |
| 6.00-12 | ||
Wheel track | mm | 800, 740, 640, 580(normally use 800) | ||
Min. ground clearance | mm | 185 | ||
Min. turning radius | m | 0.9(with no rotavator) | ||
Model of engine |
| S195N | S1100N | |
Type of engine |
| Horizontal 4-stroke | ||
Bore x stroke | mm | 95×115 | 100×115 | |
Total displacement | L | 0.815 | 0.903 | |
Compression ratio |
| 20:1 | 19.5:1 | |
Turing speed of crankshaft | rpm | 2000 | ||
1-hour rated output | KW/hphp | 9.3/12.65 | 10.5/14.3 | |
12-hour rated output | KW/hp | 8.3/11.29 | 9.8/13.33 | |
Specific fuel consumption | g/kw.h | ≤258 | ≤250 | |
Specific lube oil consumption | g/kw.h | ≤2.04 | ≤2.00 | |
| Cooling mode | Condenser (Radiator) | |||
Main farm implements (optional) | Anti-skid steel wheel Model 100-640 | |||
Contact us
Attn: Mr.Wong
