Audited Supplier
Good Quality 300L Pressurized Instant Shower/Commercial Vacuum Tube Solar Water Heater System
Sola Solar Pump free solar water heater is Open water tank for heat storage, closed coil for heat exchange and water intake. Sola Solar 20 second rapid heat exchange technology is adopted. The hot water is ready to use, and the water quality is fresh. The hot water pressure comes from the municipal cold water pressure, which matches with the cold water. It is simple to adjust the water temperature. The pressure is surging, the water volume is sufficient, and the use experience is good.
1. Coil heat exchange technology
Sola Solar pressurized fresh water solar water heater adopts RHEs reverse heat exchange technology. The open water tank is used to store heat energy, and the closed heat exchanger is used to exchange heat and take hot water. Pressurized water does not need to add booster pump, and the water quality is fresh without secondary pollution.
2. 20 second rapid heat exchange
With the rapid heat exchange technology developed by sola solar, cold water flows through the stainless steel bellows heat exchanger for 20 seconds and quickly turns into hot water. And the temperature difference between the water temperature and the heat medium after heat exchange is 2-5s . Moreover, the water quality is fresh, does not contain nitrite and Legionella, not easy to scale, and can be used as kitchen water.
3. Modular design and expandable water tank
Sola solar fresh water solar water heater adopts modular design, and the water tank can be expanded. It can be used in places with large water consumption and many water points.
4. Super blue titanium coated heat collector plate
Super blue titanium coating has the characteristics of high absorption, low reflection and no pollution. The "Super Blue Titanium Coating" coating is a high absorptivity coating that stores thermal energy inside the absorber while reducing reflections, maintaining emissivity.
5. The water quality is fresh and drinkable
Open water tank for heat storage, closed coil for heat exchange and water intake. The hot water quality is as clean as cold water in the closed coil. It can be used as kitchen water.
6. Constant water pressure
The hot water pressure comes from the municipal cold water pressure, which matches with the cold water. It is simple to adjust the water temperature. The pressure is surging, the water volume is sufficient, and the use experience is good.
7. Ease of use and maintenance free
The collector uses heat medium water without scaling; The heat exchanger adopts corrugated pipe floating heat exchange to take water, which is not easy to scale. The product is simple to operate and easy to maintain.
8. It can be connected with other energy sources
As a pre heating equipment, solar water heater can be combined with conventional energy (electric water heater, gas water heater, air source heat pump).
| Model | PFSLY-300/25-5818-P |
| Types of solar water heaters | pressurized |
| collector tube | All glass vacuum solar collector tubes |
| Absorbing coating | interference coating |
| Collector tube size | Φ58mm outer diamater*1800m length |
| Tank type | Open type with flange ends |
| Inner tank material | 0.4mm SUS304 stainless steel |
| Inner liner diameter | Φ380mm |
| Outer tank material | 0.4mm color galvanized steel plate |
| Outer tank size | Φ480mm |
| Insulation material | 50mm polyurethane foam |
| Cold/hot water port | DN20/DN25 |
| Product Weight | 115kg |
| Requirements for roof loads | 100-120kg/m2 |
| Number of collector tubes | 25 sticks |
| Aperture area | 3.6 m2 |
| water tank capacity | 235L |
| total water capacity | 300L |
| full water weight | 415kg |
| Product Size | Length B (mm) 2300 |
| Width A (mm) 2130 | |
| collector inclination | 5°~30° |
| Min. outdoor temperature | -40ºC |
| Electric heating (optional: USD50) | 220V50hz 1500W |
Project case presentation:
1. Beijing Nantong Medical
| In 2018, Beijing Haidian, for 3000 people. | |
| Pump free solar collector:96 Sets (403.2 m² in total) | Storage capacity:60 hot water 30000 liters in total. |
| Auxiliary heat source: 4 sets gas boiler | Energy saving:331772 kWh per day. |
2. Beijing University of Posts and Telecommunications
| In 2015, Beijing Changping project for 800 students | |
| Pump free solar collector:1057 Sets (44394 m² in total) | Storage capacity:60 hot water 32000 liters in total, |
| Auxiliary heat source: 8 sets gas boiler | Energy saving: 476575 kWh per day. |
3. Beijing Daxing Airport South Airlines dormitory
| In 2019, Beijing Daxing, for 1200 people. | |
| Pump free solar collector:600 Sets (2520 m² in total) | Pump free solar collector:600 Sets (2520 m² in total) |
| Auxiliary heat source: 32 sets gas boiler | Energy saving:270520 kWh per day. |
4. Ivorian Elite school
| In 2019, Cote d'Ivoire Country, for 1000 students | |
| Pump free solar collector:101 Sets (404 m² in total) | Storage capacity:60 hot water 24240 liters in total. |
| Auxiliary heat source: 15 sets Positive displacement electric heater | Energy saving: 45086 kWh per day. |
5. Nanjing Aotu Hotel
| In 2021, Nanjing city, for 8000 people. | |
| Pump free solar collector:115 Sets (460 m² in total) | Storage capacity:60 hot water 27600 liters in total. |
| Auxiliary heat source: government heat exchange station. | Energy saving: 51802 kWh per day. |
6. YanDong Microelectronics Technology Co., Ltd
| In 2021, Nanjing city, for 8000 people. | |
| Pump free solar collector:115 Sets (460 m² in total) | Storage capacity:60 hot water 27600 liters in total. |
| Auxiliary heat source: government heat exchange station. | Energy saving: 51802 kWh per day. |
7. Beijing Central Academy of Drama
| In 2014, Beijing Changping project for 1200 people | |
| Pump free solar collector:150 Sets (630 m² in total) | Storage capacity:60ºC hot water 45000 liters in total |
| Auxiliary heat source: 6 sets electric water heater | Energy saving: 45087 kWh per day. |
1. What can you buy from us?
Solar Water Heater, Solar water system. Solar collector.
2. What is your Delivery Time?
LCL order/Sample order: 3-7 days.
Full container order:10-15 days.
3. What is your warranty?
3 years after delivery;
4. Can you accept OEM?
YES. will do OEM Based on your requirements.
5. What is your MOQ?
1 set.
6. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
7. What services can we provide?
Accepted Delivery Terms: FOB,CFR,EXW;
Accepted Payment Currency: USD, EUR, CNY;
Accepted Payment Type: T/T, L/C;
Language Spoken: English, Chinese.
