Audited Supplier
Solid Lubricant GR
Solid Lubricant GR, black powder, a lubricant for drilling fluid using graphite as the main raw material, can be fully dispersed in drilling fluids and quickly adhere to borehole and BHA (Bottom Hole Assembly) so as to reduce friction coefficient. It can be directly added into water-based drilling fluids and its recommended dosage is 3.5-7.0 ppm (parts per million). This solid lubricant is specially designed to enhance the performance of drilling fluids by providing an extra layer of protection against friction and wear, ultimately leading to longer tool life and reduced maintenance costs.
| Items | Specifications |
| Appearance | Black powder |
| Moisture, % | ≤12.0 |
| pH | 6.0-8.0 |
| Fluorescence grade | ≤5.0 |
| Reduced rate of friction factor, % | ≥50.0 |
- Good lubricating capability to be applied in complicated wells such as horizontal and directional wells.
- Resist high temperature up to 200 ºC, so it can be applied in deep wells or ultra-deep wells.
- Resist salt, calcium and magnesium, so it can be applied in freshwater, saltwater; saturated saltwater and seawater drilling fluids.
- Non-toxic and has no harm to environment.
- Low fluorescence to be applied in exploration wells.
- Match with other additives well.
They shall be avoided contact with eyes, skins and clothes, otherwise flush it with clean water.
Handling methods and dangerous data shall be referred to MSDS.
| I . Filtration Reducer For WBM | |
| DSP-1 HTHP Polymer Filtration Reducer | |
| DSP-2 Polymer Filtration Reducer | |
| PAN-Trol Low Viscosity Polymer for Filtration Reducing | |
| PAN-Vis HT Polymer For Viscosity Increasing And Filtration Reducing | |
| SMP Sulfomethylated Phenolic Resin | |
| SMP-III Sulfomethylated Phenolic Resin | |
| SPNH Lignite Resin for Drilling Fluid | |
| LYS Modified Starch | |
| SHR-1 Modified Starch HT | |
| DACP Alkyl cellulose polysaccharide for drilling fluid | |
| II. Shale Inhibitor For WBM | |
| NP-1 Nano-polyester for Drilling Fluid | |
| NS-1 Nano-SiO2 | |
| FF-I Sulfonated Asphalt(High purity) | |
| FF-V Sulfonated Asphalt(Ecnomical) | |
| FF-III Emulsified Asphalt | |
| AP-1 Polyamine Shale Inhibitor | |
| POLYOL | |
| DLA-1 Aluminum Based Shale Inhibitor | |
| III. Lubricant For WBM | |
| HEP-1 EP Lubricant for High Density Mud | |
| EP-202 EP Lubricant for Drilling Fluid | |
| EP-204 Oil Base Lubricant for Drilling Fluid | |
| GR Solid Lubricant (Graphite base) | |
| IV. Thinner For WBM | |
| SF Silicon-fluorine Thinner | |
| DLST CF Chromium Free Lignosulfonate Thinner | |
| V. Lost Circulation Materials | |
| SDF3 Compounded LCM | |
| GWS-1 Delayed Expansion LCM | |
| HFD-1 Rapid Filtrating High Strength LCM | |
| VI. OBM Additives | |
| OME-1 Primary Emulsifier for OBM | |
| OME-2 Secondary Emulsifier for OBM | |
| OFC OBM Filtration Reducer | |
| OMP-1 Nano-Polymer Sealing Additive for OBM | |
| OMP-2 Expanded Graphite Plugging Agent for OBM | |
| VII.Defoamer For WBM | |
| Polyether Defoamer | |
| PD-100 Organosilicon Deformer | |
| VIII. Bactericide For WBM | |
| JM-1 Bactericide for Drilling Fluid | |
| IX. Filtration Reducer For Cementing | |
| DSPC-1 Filtration Reducer For Cementing | |
| DSPC-2 Filtration Reducer For Cementing | |
| X. Other Series | |
| SR301 Pipe Freeing Agent | |
| ZH-2 Corrosion Inhibitor for Drilling Fluid | |
Shandong Deshunyuan Petro Sci & Tech Co. Ltd (hereinafter referred to as "DSY") is located in Shengli Oilfield (The second largest oilfield in China) of Dongying city. The company was founded in 1999 with 24.5 million USD registered capital. It is a high-tech enterprise which is dedicated to the new petroleum technology development and application. The company has more than 100 acres of drilling fluid workshops and more than 30, 000 MT annual production capacity of drilling fluid additives.
The main business covers drilling fluid additives production, drilling fluid engineering service, harmless disposal technology service of drilling waste, R&D of chemicals for Oilfield. DSY provides drilling fluid products and technical proposal for the customers to help them maximize the productivity and cost-efficiency of their drilling operations.
They shall be packaged in 25kg multi-wall paper sacks. They shall be stored in a shady, dry, and ventilated place.
