Audited Supplier
NBGE 125-80-160
81 M
259 M³/H
Motor
Single-Stage Pump
20bar
Single Suction Pump
Horizontal Pump
Verticaljoint Surface Pump
Non Self-Priming Single-Stage Centrifugal Volute P
Closed
Commercial Water Pressurization
150 Kg
Water
0 .. 120 °c
20 °c
998.2 Kg/M³
Grundfos
Standard Export Plywood Case or Carton
174 kg
Product Description
End - suction close - coupled single - stage pump
NBGE 125 - 80 - 160/161 AAF2AESBAQEPWB
NBGE 125 - 80 - 160/161 AAF2AESBAQEPWB
Applications:
1.Commercial heating
2.Commercial air - conditioning
3.Commercial water boosting
4.District heating
5.Industrial cleaning processes
6.Heat supply
7.Desalination
8.Municipal water transmission and distribution
9.Irrigation
10.Water supply for residential areas and buildings
Short - coupled pump with MGE motor in accordance with ISO 2858
1.Commercial heating
2.Commercial air - conditioning
3.Commercial water boosting
4.District heating
5.Industrial cleaning processes
6.Heat supply
7.Desalination
8.Municipal water transmission and distribution
9.Irrigation
10.Water supply for residential areas and buildings
Short - coupled pump with MGE motor in accordance with ISO 2858
High - Efficiency NBGE End - Suction Power Supply for Demanding Applications The Grundfos NBGE end - suction close - coupled pump is a non - self - priming single - stage centrifugal volute pump with an axial suction port, a radial discharge port, and a horizontal shaft. If your pump is for demanding applications with different flow requirements, the NBGE can be equipped with an 11 - kW permanent - magnet MGE motor, with a built - in variable - frequency drive and IE5 efficiency, maintaining high efficiency at all times. The close - coupled pump has a compact design and can be installed in limited areas. The main dimensions of the NBGE pump comply with the ISO 2858 standard. All Grundfos end - suction pumps are tested according to the acceptance grade standard of ISO 9906:2012 before leaving the factory. |
| NBGE 125 - 80 - 160/161 AAF2AESBAQEPWB The non - self - priming single - stage volute centrifugal pump is designed in accordance with the ISO 5199 standard, and its dimensions and rated performance comply with the ISO 2858 standard (16 bar). The flanges are of PN 16 type, and their dimensions conform to the EN 1092 - 2 standard. The pump is equipped with an axial suction port, a radial discharge port, a horizontal shaft, and a back - pull - out design, which allows maintenance personnel to disassemble the motor, motor base, cover, and impeller without loosening the pump casing or pipes. The unbalanced O - ring shaft seal meets the DIN EN 12756 standard. An air - cooled permanent - magnet synchronous motor is closely coupled to the pump. The junction box of the motor contains a frequency converter and a PI controller. This enables the system to continuously adjust the motor speed, allowing the pump to be adjusted to the optimal working state according to the environmental conditions. |  |
Controller
Frequency converter: Built - in
Pressure sensor: N
Frequency converter: Built - in
Pressure sensor: N
Liquid
Liquid being transported: Water
Liquid temperature range: 0..120 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³
Liquid being transported: Water
Liquid temperature range: 0..120 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³
Technology
Pump speed based on which pump data is obtained: 2895 revolutions per minute
Rated flow rate: 188.7 m³/h
Rated head: 24.22 meters
Actual impeller diameter: 161 mm
Nominal impeller diameter: 160
Type of impeller: Standard
Shaft - seal configuration: Single
Main shaft seal: BAQE
Shaft seal code: BAQE
Curve tolerance: ISO9906:2012 3B
Bearing design: Standard
Pump speed based on which pump data is obtained: 2895 revolutions per minute
Rated flow rate: 188.7 m³/h
Rated head: 24.22 meters
Actual impeller diameter: 161 mm
Nominal impeller diameter: 160
Type of impeller: Standard
Shaft - seal configuration: Single
Main shaft seal: BAQE
Shaft seal code: BAQE
Curve tolerance: ISO9906:2012 3B
Bearing design: Standard
Materials
Pump casing: Cast iron
Pump housing: EN - GJL - 250
Pump casing: ASTM class 35
Wear ring: Brass
CuZn34Mn3AI2Fe1 - C
Impeller: Cast iron
EN - GJL - 200
ASTM class 30
Internal pump - house coating: CED
Shaft: Stainless steel
EN 1.4301
AISI 304
Pump casing: Cast iron
Pump housing: EN - GJL - 250
Pump casing: ASTM class 35
Wear ring: Brass
CuZn34Mn3AI2Fe1 - C
Impeller: Cast iron
EN - GJL - 200
ASTM class 30
Internal pump - house coating: CED
Shaft: Stainless steel
EN 1.4301
AISI 304
Installation
Ambient temperature range: - 20..50 °C
Maximum operating pressure: 16 bar
Pipe connection standard: EN 1092 - 2
Inlet size: DN 125
Outlet size: DN 80
Pressure rating for pipe connection: PN 16
Bearing lubrication: Grease
Pump housing with feet: No
Yes = With support block, No = Without support block: N
Ambient temperature range: - 20..50 °C
Maximum operating pressure: 16 bar
Pipe connection standard: EN 1092 - 2
Inlet size: DN 125
Outlet size: DN 80
Pressure rating for pipe connection: PN 16
Bearing lubrication: Grease
Pump housing with feet: No
Yes = With support block, No = Without support block: N
Electrical data
Rated power - P2: 18.5 kW
Power supply frequency: 50 Hz
Rated voltage: 3 x 380 - 480 V
Rated current: 33.0 - 27.8 A
Cos phi - Power factor: 0.94 - 0.92
Rated speed: 360 - 4000 revolutions per minute
IE efficiency class: IE5
Motor full - load efficiency: 92.8 %
Number of motor poles: 2
Enclosure rating (IEC 34 - 5): IP55
Insulation class (IEC 85): F
Motor number: 92875518
Bearing insulation type N - end: Steel Bearing
Rated power - P2: 18.5 kW
Power supply frequency: 50 Hz
Rated voltage: 3 x 380 - 480 V
Rated current: 33.0 - 27.8 A
Cos phi - Power factor: 0.94 - 0.92
Rated speed: 360 - 4000 revolutions per minute
IE efficiency class: IE5
Motor full - load efficiency: 92.8 %
Number of motor poles: 2
Enclosure rating (IEC 34 - 5): IP55
Insulation class (IEC 85): F
Motor number: 92875518
Bearing insulation type N - end: Steel Bearing
Others
Minimum efficiency index, MEI ≥: 0.70
Net weight: 150 kg
Gross weight: 174 kg
Shipping volume: 0.707 m³
Minimum efficiency index, MEI ≥: 0.70
Net weight: 150 kg
Gross weight: 174 kg
Shipping volume: 0.707 m³
