Audited Supplier
Use the Application-Specific Intergrated Circuit technoloy, produce according to the international general standards. In such conditions, our products can be guaranteed with the advanced functions, stable performance and reliable quality. It can achieve a number of special services when cooperate with SPC telephone exchange, and can use with a variety of standard swicthes. In order that you can use the phone better, please read this instruction carefully before use.
The Main Functions and Features
Handset - hearing aid compatibility requirements are achieved
Handle socket - connect the handle and modular jack of the host
DATA - set a socket to connect modem, fax or transponder
RINGER - voice high/low adjustable
Speaker volumn knob - adjust the volumn of hand-free
One-touch function - 10 sets 32 digits memory records (Power Fail Safeguard)
Hand-free knob - hands-free function
Hand-free light - recording light when in a hands-free calls state
REDIAL key - redial the final phone numbers
FLASH key - used with redial key
STORY key - memory function
Ringer indicate light - the light will flash when the calls coming
Attention
1. Telephone should be installed in the place where is dry, ventilated and without corrosive gas.
2. This machine should not be placed in the high temperature, moisture and strong magnetic palace, in order to ensure the normal work.
3. Do not use the organic solvent to scrubbing.
Installation Method
1. Use the telephone line to connect handle and machine, and put down the handset.
2. Connect the linear side Y to the outside line, then insert the linear side P to the host socket.
3. Pick up the handset or press hand-free, the installation is finished when you can hear the dial tone.
Technical Index & Parameter
1. Use condition
| Ambient Temperature | -10ºC±40ºC |
| Relative Humidity | 45%~95% |
| Atmospheric Pressure | 86Kpa~106Kpa |
| Ambient Noise | 60dB |
2. DTMF (Dual-tone Multifrequency)
(1) Signal frequency
Low Frequency Group: -9dB±3dB
High Frequency Group: -7dB±3dB
Average frequency combination level of high frequency component is more + 2dB than low frequency component.
(2) Frequency Engender (Frequency Deviation ± 1.5%)
The total power level of useless signal frequency component in the output is lower at least 20dB than the double of the low frequency component of the audio signal.
(3) Ringing sound in high level is not less than 70dB (A)
(4) DC resistance is not more than 350Ω
User Guide
Ordinary calls and hand-free calls converting to each other
Ordinary transfer to hand-free: when in a call state, press hand-free, then put down the handset
Hand=free transfer to ordinary: when in a hand-free call state, pick up the handset is ok
Adjust the Hands-free Calls Volume
In hand-free state, can adjust the volume by the hand-free volume knob
Adjust the Ring Volume
Adjust high or low (HI/LOW) by the ring tone switch.
Re-dial Function
Make a phone call, if on busy or not connected, then need to make a phone call again. Press the switch button after hanging up to redial the last dialed number.
Hang up (transfer) Function
Use with the redial key number to achieve redial functions, and transfer to the extension as well.
One-touch Dial
Pick up the handset, stored in a number of "one-touch" according to the corresponding international general identification, then it will make a outside call automatically.
The Steps to Set up the "One-touch " Number
1. Pick up the handset, press the "Hold" key, you will hear a beep sound. After that enter the phone number you want to set up, and then press the "One touch" there will be a beep sound again, that means it has finished.
2. Pick up the handset, press *** key about 3 seconds, there will be a beep sound, then enter the number you want to set up. After that, press the "one-touch" key, you will hear a beep sound again, that means it has finished.
