Audited Supplier
6F6-W0084-00-4D
Yes
1 Year
Boat, Yacht
ISO
Non-Customized
Oxygenation
Aluminum Alloy
Handle Steering Assy
2
Gasoline
2 Stroke
Outboard
1-2L
New
Yamaha
40HP
Steering
YALUME MARINE
Box
China, Japan, Taiwan
8409911100
Product Description
6F6-W0084-00-4D
Handle Steering Assy, Yamaha,
For Outboard: Yamaha 40
Functions:
| 1. Directional Control: The primary function is to allow the operator to steer and control the boat's direction. By turning the handle, the entire outboard motor pivots, which changes the boat's course. |
| 2. Throttle Control: The handle typically includes a throttle grip, allowing the operator to adjust the boat's speed. Rotating the grip forward increases speed, while rotating it backward reduces speed, making it easy to accelerate or decelerate smoothly. |
| 3. Gear Shifting: Many Yamaha tiller handles also include a gear shift lever on the handle itself, enabling easy shifting between forward, neutral, and reverse gears. This allows for quick adjustments without moving hands from the handle. |
| 4. Trim and Tilt Adjustment: Higher-end Yamaha models may feature buttons for trim and tilt on the handle. The trim function adjusts the angle of the motor relative to the water, optimizing performance based on speed and water conditions. The tilt function allows the operator to raise the motor when navigating shallow waters or when the boat is out of the water. |
| 5. Emergency Control and Safety: Most handle steering assemblies come with a built-in emergency kill switch, which instantly shuts down the engine if the operator falls overboard or releases the handle unexpectedly. This feature helps improve safety by immediately stopping the motor in case of an emergency. |
| 6. Enhanced Maneuverability at Low Speeds: The handle assembly allows for finer control at lower speeds, making it easier to navigate tight spaces, such as docking or shallow areas, where precise movements are necessary. |
Maintenance Tips:
| 1. Regular Cleaning: Saltwater can cause corrosion, so after each use, rinse the handle assembly with fresh water to remove salt and grime. Wipe it down to prevent moisture buildup that could lead to rust. |
| 2. Lubricate Moving Parts: Apply marine-grade grease to the pivot points and linkages to ensure smooth movement. This should be done periodically, especially if you notice the steering becoming stiff or unresponsive. |
| 3. Check for Loose Connections: Regularly inspect the bolts and screws that connect the handle steering assembly to the motor and tighten them if necessary. Loose connections can make steering less accurate and cause rattling. |
| 4. Inspect the Grip and Wiring: Check the handle grip for wear, especially if it's rubberized, and replace it if it becomes overly worn or loses grip. For models with electronic controls, inspect wiring for wear or corrosion and address issues as soon as possible. |
| 5. Test Throttle and Shift Functions: Regularly test the throttle and gear shift on the handle to make sure they engage smoothly. Sticking or hesitation could indicate a need for adjustment or lubrication. |
More Products We Have:
| PART NO. | DESCRIPTION |
| 6F6-W0084-00-4D | HANDLE STEERING ASSY CONJUNTO DE MANIJA |
| 676-42111-02-4D | HANDLE, STEERING MANIJA DE DIRECCION |
| 664-42119-00 | GRIP, STEERING HANDLE MANGO, MANIJA DE DIRRECCION |
| 6F6-42177-A0 | RUBBER, HANDLE HULE DE MANIJA |
| 6F6-42137-10 | INDICATOR, THROTTLE INDICADOR ACELERADOR |
| 90269-02M09 | RIVET REMACHE |
| 90149-05M13 | SCREW TORNILLO DE REGLAJE |
| 92903-10600 | WASHER, PLATE RONDANA SENCILLA |
| 90501-23215 | SPRING, COMPRESSION RESORTE DE COMPRESION |
| 90386-08032 | BUSH BUJE |
| 676-42115-00 | SHAFT, STEERING HANDLE EJE MANIJA DE DIRECCION |
| 676-42159-00 | STAY SOPORTE |
| 97095-06020 | BOLT PERNO |
| 92995-06600 | WASHER ARANDELA |
| 650-42152-00-94 | GEAR ENGRANE |
| 91690-30025 | PIN, SPRING PASADOR DE RESORTE |
| 676-42151-00-94 | PINION PINON |
| 95380-06600 | NUT, HEXAGON TUERCA |
| 92990-06100 | WASHER, SPRING ARANDELA PLANA |
| 90386-08M00 | BUSH BUJE |
| 6F5-26311-00 | CABLE, THROTTLE 1 CABLE DE ACELERADOR 1 |
| 676-26391-00 | CLIP, CABLE PRESILLA DE CABLE |
| 676-26392-00 | CLIP, CABLE 2 PRESILLA DE CABLE 2 |
| 97095-05010 | BOLT PERNO |
| 92995-05600 | WASHER ARANDELA |
| 90386-12089 | BUSH BUJE |
| 90101-12M37 | BOLT TORNILLO |
| 92990-12200 | WASHER, PLAIN ARANDELA PLANA |
| 90202-12092 | WASHER, PLATE ARANDELA DE PLANA |
| 90201-12537 | WASHER, PLATE ARANDELA PLANA |
| 90206-12054 | WASHER, WAVE ARANDELA ONDULADA |
| 90185-12058 | NUT, SELF-LOCKING TUERCA AUTOBLOCANTE |
| 656-42126-01 | FRICTION, STEERING HANDLE GRIP FRICCION DE MANGO DIRECCION |
| 97095-06020 | BOLT PERNO |
| 90185-06062 | NUT, SELF-LOCKING TUERCA AUTOBLOCANTE |
| 6E0-83627-41 | LABEL, CAUTION 7 ETIQUETA DE PRECAUCION 7 |
