Audited Supplier
CPQYD30-XRW22
2 Years
2 Years
Adjustable
Diesel Forklift
Diesel Engine
1.5-3.5ton
Diesel
500mm
3000-7000mm
New
Forklift Truck
Red/Yellow
Pneumatic/Solid/Non-Marking
1070mm/1220mm/Othe Longer
HANGCHA
Standard Packing
8CBM
China
8727209000
Product Description
Hangcha X series 1.5-3.5ton diesel/gasoline/LPG forklift truck
The X series is the new series of internal combustion counterbalance forklift truck developed by Hangcha independently, adopting the world advanced technologies based on the original products. Through the comprehensive upgrading of appearance molding, energy conservation, environmental friendly, comfort, security and reliability, it will become the world-class forklift truck which can meet your overall demands.
Fully improved reliability
And security
1. The radiator adopts aluminous plate-fin radiator with better performance and higher structural strength independent oil radiator, optimized oil and water heat dissipation channel and double ventilation holes on counterweight can greatly improve cooling efficiency and reliability of overloaded operation and ensure reliable operation of the engine.
2. 2.0~3.8t roller bearing on the steeringaxle king pin adopts large size tapered roller bearing (TRB), larger steering cylinder and bumper block assemblies on the top, which can prolong the service
4. Optimized hydraulic breather structure and integrated with return oil filter can prolong the service life of hydraulic pressure system.
2. 2.0~3.8t roller bearing on the steeringaxle king pin adopts large size tapered roller bearing (TRB), larger steering cylinder and bumper block assemblies on the top, which can prolong the service
life of bearing and highly improve the reliability of steering axle.
3. Overhead guard adopts special-shaped steel tube, which can reinforce the strength and improve sealing of the cab.4. Optimized hydraulic breather structure and integrated with return oil filter can prolong the service life of hydraulic pressure system.
Standard specification:
*original Japanese Nissan K21/K25 engine
*hydraulic( automatic) transmission
Options:
*duplex mast, also called 2 stage mast, wide view
*lifting height 3 meters
*fork length 1070mm
*pneumatic tyre
Options:
*container mast, 3 stage full free mast,height 4.5meters
*full free mast, 2 stage or 3 stage lifting height 3-7 meters
* dual front tyres
* dual front tyres
*side shifter
*solid tyres, non-marking tyres
*cabin, heater, air conditioner
*extended fork length 1070mm-2570mm etc longer
Attachments:
* bale clamp, paper roll clamp,block clamp
* push & pull
* side shifter, fork positioner
* bucket
*single-double pallet forks etc
*extended fork length 1070mm-2570mm etc longer
Attachments:
* bale clamp, paper roll clamp,block clamp
* push & pull
* side shifter, fork positioner
* bucket
*single-double pallet forks etc
| 1 | Manufacturer | HANGCHA GROUP CO., LTD | |||||||
| 2 | Manufacturer's type designation | CPQD15-XRW21 CPQYD15-XRW21 CPYD15-XRW51 | CPQD18-XRW21 CPQYD18-XRW21 CPYD18-XRW51 | CPQD20-XRW22 CPQYD20-XRW22 CPYD20-XRW52 | CPQD25-XRW22 CPQYD25-XRW22 CPYD25-XRW52 | CPQD30-XRW22 CPQYD30-XRW22 CPYD30-XRW52 | CPQD35-XRW22 CPQYD35-XRW22 CPYD35-XRW52 | CPQD38-XRW22 CPQYD38-XRW22 CPYD38-XRW52 | |
| 3 | Drive | gasoline/lpg | gasoline/lpg | gasoline/lpg | gasoline/lpg | gasoline/lpg | gasoline/lpg | gasoline/lpg | |
| 4 | Operator type | Seated | Seated | Seated | Seated | Seated | Seated | Seated | |
| 5 | Rated capacity/rated load | Q (kg) | 1500 | 1750 | 2000 | 2500 | 3000 | 3500 | 3800 |
| 6 | Load centre distance | c (mm) | 500 | 500 | 500 | 500 | 500 | 500 | 500 |
| 7 | Service Weight | kg | 2720 | 2880 | 3450 | 3850 | 4380 | 4750 | 4950 |
| 8 | Tyres | Pneumatic | Pneumatic | Pneumatic | Pneumatic | Pneumatic | Pneumatic | Pneumatic | |
| 9 | Tyre size, front | 6.5-10-10PR | 6.5-10-10PR | 7.00-12-12PR | 7.00-12-12PR | 28×9-15-14PR | 28×9-15-14PR | 28×9-15-14PR | |
| 10 | Tyre size, rear | 5.00-8-10PR | 5.00-8-10PR | 6.00-9-10PR | 6.00-9-10PR | 6.50-10-10PR | 6.50-10-10PR | 6.50-10-10PR | |
| 11 | Height, mast lowered | h1 (mm) | 1995 | 1995 | 1999 | 1999 | 2054 | 2169 | 2169 |
| 12 | Free lift | h2 (mm) | 155 | 155 | 160 | 160 | 165 | 170 | 170 |
| 13 | Lift | h3 (mm) | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 |
| 14 | Height, mast extended | h4 (mm) | 3955 | 3955 | 4045 | 4045 | 4140 | 4140 | 4140 |
| 15 | Height of overhead guard (cabin) | h6 (mm) | 2120(2220) | 2120(2220) | 2120(2220) | 2120(2220) | 2150(2250) | 2150(2250) | 2150(2250) |
| 16 | Overall length | l1 (mm) | 3205 | 3240 | 3615 | 3680 | 3770 | 3850 | 3880 |
| 17 | Length to face of forks | l2 (mm) | 2285 | 2320 | 2545 | 2610 | 2700 | 2780 | 2810 |
| 18 | Overall width | b1/b2(mm) | 1090/1485 | 1090/1485 | 1155/1595 | 1155/1595 | 1225/1725 | 1225/1725 | 1225/1725 |
| 19 | Fork dimensions | s/e/l (mm) | 35×100×920 | 35×100×920 | 40×122×1070 | 40×122×1070 | 45×122×1070 | 50×122×1070 | 50×122×1070 |
| 20 | Turning radius | Wa (mm) | 2035 | 2060 | 2270 | 2330 | 2400 | 2440 | 2480 |
| 21 | Minimum pivoting point distance | b13 (mm) | 600 | 600 | 780 | 780 | 810 | 810 | 810 |
| 22 | Travel speed, laden/unladen | km/h | 16.5/17.5 | 16.5/17.5 | 20/21 | 20/21 | 18/19 | 18/19 | 18/19 |
| 23 | Lift speed, laden/unladen | m/s | 0.5/0.55 | 0.5/0.55 | 0.55/0.60 | 0.55/0.60 | 0.46/0.50 | 0.38/0.45 | 0.38/0.45 |
| 24 | Lowering speed, laden/unladen | m/s | 0.45/0.50 | 0.45/0.50 | 0.45/0.50 | 0.45/0.50 | 0.45/0.50 | 0.35/0.40 | 0.35/0.40 |
| 25 | Engine | K21 | K21 | K25 | K25 | K25 | K25 | K25 | |
