Audited Supplier
Countertop Film-20
Online Service
1 Years
Blow Molding
Soft
Translucent
Stained
TPU/Tph
Self-Adhesive
Furniture Film
Surface Protection
Tph Countertop Protective Film
6mil;8mil
Scratch-Resistant, Anti-Oil
Solid Wood Furniture, Large and Small Open Lacque
Tianrun
Roll Packing, Pallet Packing, Box Packing
1.52m*15m
China Henan Xinxiang
Product Description
Description:
Permanence Countertop Protective film is the ideal choice to safeguard your expensive counter tops. Crafted from high-quality PET OR TPH materials, it offers exceptional wear resistance, effectively resisting scratches, abrasion, and stains and heat resistance. This countertop protective film boasts outstanding waterproof performance, preventing moisture from penetrating beneath the countertop, thus preventing dampness and corrosion.
Benefits:
* Easy roll out with no specialist applicator equipment required.
* Will not creep and wrinkle after application. Stays where it is put!
* Totally waterproof,anti-scratch,osmosis prevention,heat resistance.
* Protects against expensive to clean spillages from paints, varnishes etc.
* Easily removed, will not leave a sticky residue.
* Can be left for up to 3-5 years.
* Adheres to most marble,granite,quartz,wooden countertop types
* Nano silicone coating.
| Raw material | TPH |
| Glue type | silica gel |
| Recommended thickness | 6mil ; 8mil |
| Recommended size | 1.52m*15m |
| Colour | Transparent, matte |
| Product performance | Scratch-resistant,anti-oil,high temperature resistant,waterproof and moisture-proof. |
| EASY TO INSTALL | Solid wood furniture,large and small open lacquer, glossy furniture, stone countertop,can be edged |
Preparation:Spray bottle with soapy water,knife,scissors,towel,scraper.
1.Measure the size of table and cut the film.
2.Clean the surface of your table ,then spray the soapy water to surface of table.
3.Use two pieces of tape to peel off the clear backing sheet from film.
4.Spray soapy water to the glue side of the film.
5.Apply to the table. Adjust the position of the film so that it can completely cover the tabletop.
6.Use scraper to push out any water and air bubbles from center to side.
7.Trim the excess film at the edges.
8.Finally,use a towel to wipe remaining water.
2.Clean the surface of your table ,then spray the soapy water to surface of table.
3.Use two pieces of tape to peel off the clear backing sheet from film.
4.Spray soapy water to the glue side of the film.
5.Apply to the table. Adjust the position of the film so that it can completely cover the tabletop.
6.Use scraper to push out any water and air bubbles from center to side.
7.Trim the excess film at the edges.
8.Finally,use a towel to wipe remaining water.
(Require high proficiency in film sticking, recommend the operation of professional construction team)
