Audited Supplier
21010-3003000 21210-3414000 21214-3414000
Three Years
One Year
45# 40cr
ISO/TS16949, ISO9001
Volkswagen, Benz, BMW, Hyundai, Honda, Toyota, Jeep, Nissan, Ford, Buick, Chery, Chevrolet, Cadillac, Geely, Audi, Peugeot, Lexus, Volvo, Mazda, Kia, Lada
Front
Yes
Center Link
Hdag/Neutral/Customized
for Lada Samara Gaz Niva Nova Uaz Vaz
for Ba3 Granta Kalina Priora Oka Vesta
for Gazelle Gazel Gazon Kamaz Patriot
2101 2108 2121 2123 2110 2112 1200 1600 3160 3163
3302-3414057-11 2217-3414057-11 3302-3414056-11
2217-3414056-11 33104-3414057 33104-3414056
469-3414057-01 3163-3414057 3163-3414056
2217-3414029-01 2217-2904414 2217-2904314
A21r232904414 A21r232904314 236021-3001013
236021-3001014 3160-2304014
21012904192 210102904192 210102904082
21102904192 21232904192 212302904192
111803414057 111803414056 33023414029
210103003134 210103003136 210103003130
HDAG
Cartons or Pallets
OEM STANDARD
Made in China
Product Description
The design and development of ball joint tie rod test-bed describes the following aspects:
(1) The failure mechanism of the automobile steering rod, rack end, ball joint etc. This paper mainly discusses the composition and working environment of the automobile steering rod, analyzes the parts that the steering rod is easy to fail, and the cause of the rod failure.
(2) design of automobile steering rod test-bed. The ball joint, tie rod, rack end, inner tie rod, stabilizer link, test-bed should be able to simulate the actual movement of the tie rod, especially the ball pin and the ball joint bushing, the relative movement of the actual bushing after the load, it is easy to judge the critical point of the rod failure and the number of movement of the steering rod from start to failure.
in addition, the design of the test rig to meet the People's Republic of China Automotive industry standards in the automotive steering Rod Joint Assembly test method Standard, that is, qc/t 304-1999 (instead of ZB T23 006-87), and draw the two-dimensional assembly drawing rod and part drawings.
(3) modeling and analysis of virtual prototype of test bench. Based on the above design, using three-dimensional modeling software pro/e set up a test-bed model, and then combined with the dynamic analysis software Adams software to establish a test bench virtual prototype. The kinematic analysis and dynamic analysis are carried out, according to the data obtained from the virtual prototype, the rationality of the design and the driving force required by the test bench are judged.
Hdag OEM 21010-3003000 21210-3414000 21214-3414000 tie rod assembly Auto steering rod Set factory for Lada Niva Vaz 21210-3414010 2121-3414010 21230-3414010
HDAG Product Specification:
Housing blank: National standard NO 45# Steel and forging molding under the condition of high temperature of 1200ºC.
Ball Stud: Adopted the international standard 40CR steel material and automatic mirror treatment to ensure that the ball stud rotation operating normally.
Ball Race: Adopted imported US DuPont 500P materials to ensure its excellent abrasion resistance.
Boot: Imported neoprene to ensure of its oil and fire resistance, ozone resistance, acid and basic resistance, high or low temperature test (-40 ºC --120 ºC), high tensile strength and air tightness.
Grease: Specific grease to ensure of temperature test of high temperature 140 ºC and low temperature -40ºC.
Product Surface: Trivalent chromium plating surface treatment to ensure of environmental protection, rust protection, salt spray resistance and corrosion resistance.
What we can promise you?
1 Year warranty for HDAG brand products under normal use;
Manufacturing & Selling Integration, Competitive price with high & stable quality products;
Fast delivery and excellent after sales service;
More than 10 years' experience in researching, developing and supplying steering suspension parts for various cars and truck;
ISO9001, TS16949 certificate;
Product description
Reference packing way:
Each item with neutral plastic bag/foam bag/HDAG color bag/customized logo bag, then in outer cartons with woven bag;
Of course, we offer color box and outer pallets service if you demand;
Our tie rod ball joint workshops:including placing material, stamping, machining, riveting, assemble, adjusting, packing etc...
Our semi-finished suspension parts show:
Testing Equipment&Report
I. We only do OEM, produce high precisional suspension parts, different with other factories: attached our torque and tensile test machines
II.Quality guarantee: We promise to all of our old and new customers: ONE year guarantee or 50,000kms since B/L date, If we ship u wrong products or any quality problem, we will full compensation with free.
Attached our suspension tie rod ball joints test report:
Customer visits and our service team:
Attend exhibitions
Our certificates:
Our brand HDAG, POWERTRAC registration, license and export registration, our tie rod ball joint stabilizer link patents registration
Contact us
We take our reputation seriously, so we understand the value of trust. If you have any question, please don't hesitate to email us. We will reply you ASAP and try our best to solve your problem.
Our relative hot sale auto tie rod ball joint rack end stabilizer link control arms covering different car model of Toyota Honda MITSUBISHI NISSAN ISUZU SUZUKI MAZDA HYUNDAI KIA GM CHEVROLET BUICK FORD JEEP CHRYSLER DODGE FIAT OPEL RENAULT PEUGEOT VOLKSWAGEN AUDI BMW MERCEDES BENZ:
Welcome contact us for sending interesting list by mail or whatsapp , THANKS
(1) The failure mechanism of the automobile steering rod, rack end, ball joint etc. This paper mainly discusses the composition and working environment of the automobile steering rod, analyzes the parts that the steering rod is easy to fail, and the cause of the rod failure.
(2) design of automobile steering rod test-bed. The ball joint, tie rod, rack end, inner tie rod, stabilizer link, test-bed should be able to simulate the actual movement of the tie rod, especially the ball pin and the ball joint bushing, the relative movement of the actual bushing after the load, it is easy to judge the critical point of the rod failure and the number of movement of the steering rod from start to failure.
in addition, the design of the test rig to meet the People's Republic of China Automotive industry standards in the automotive steering Rod Joint Assembly test method Standard, that is, qc/t 304-1999 (instead of ZB T23 006-87), and draw the two-dimensional assembly drawing rod and part drawings.
(3) modeling and analysis of virtual prototype of test bench. Based on the above design, using three-dimensional modeling software pro/e set up a test-bed model, and then combined with the dynamic analysis software Adams software to establish a test bench virtual prototype. The kinematic analysis and dynamic analysis are carried out, according to the data obtained from the virtual prototype, the rationality of the design and the driving force required by the test bench are judged.
Hdag OEM 21010-3003000 21210-3414000 21214-3414000 tie rod assembly Auto steering rod Set factory for Lada Niva Vaz 21210-3414010 2121-3414010 21230-3414010
HDAG Use High quality Steel, And The Best Treatment Surface For High Quality Tie Rod End/Side rod assy. Ball pin delicate smooth, instead of rough face, with heat treatment and galvanized instead of no treatment, use the best neoprene CR instead of low quality rubber
Other Suppliers Use Lower or recycled Steel, And No Treatment Surface For Lower Quality Tie Rod End.Tie Rod End Performance Testing Instrument
We Have Own Test Equipment, As OEM Quality. We Control Quality Carefully. Attention To Detail. Focus On Quality. Excellent products.Do The Fatigue Test Tie Rod End For More Than 360 Hours.
Make Sure Our Side rod assy/Tie Rod End Reach Or More Better Than OEM Quality.
HDAG Product Specification:
Housing blank: National standard NO 45# Steel and forging molding under the condition of high temperature of 1200ºC.
Ball Stud: Adopted the international standard 40CR steel material and automatic mirror treatment to ensure that the ball stud rotation operating normally.
Ball Race: Adopted imported US DuPont 500P materials to ensure its excellent abrasion resistance.
Boot: Imported neoprene to ensure of its oil and fire resistance, ozone resistance, acid and basic resistance, high or low temperature test (-40 ºC --120 ºC), high tensile strength and air tightness.
Grease: Specific grease to ensure of temperature test of high temperature 140 ºC and low temperature -40ºC.
Product Surface: Trivalent chromium plating surface treatment to ensure of environmental protection, rust protection, salt spray resistance and corrosion resistance.
What we can promise you?
1 Year warranty for HDAG brand products under normal use;
Manufacturing & Selling Integration, Competitive price with high & stable quality products;
Fast delivery and excellent after sales service;
More than 10 years' experience in researching, developing and supplying steering suspension parts for various cars and truck;
ISO9001, TS16949 certificate;
Product description
| Item Name | HDAG auto Tie Rod Assembly For LADA NIVA 2121 Center Link OE 2101-3003011,21013003011 |
| OEM/REF NO. | 2101-3003011,21013003011 |
| Car Model / year | for LADA NIVA |
| POSITION | Right/ Left/ Front /axle |
| MOQ | 100PCS/300PCS/500 PCS depend on items |
| Product parameters | OEM standard |
| Payment Terms | T/T, D/A, L/C, Cash |
| Quality Guarantee | 1 Year or 50,000kms |
| Delivery Time | 1. Sample: within 3 days if with stock roughcast 2. Batch : 45-60 days since receive deposit |
| Package | 1. color bag HDAG+master carton 2. Neutral bag/foam bag+master carton 3.Customize brand bag and box design AS REQUIRE+master carton Notes: all master carton with woven bag to avoid broken during transit, offer pallets service if demand |
| Loading Port | Ningbo/Shanghai/Yiwu/Guangzhou or pointed port |
Reference packing way:
Each item with neutral plastic bag/foam bag/HDAG color bag/customized logo bag, then in outer cartons with woven bag;
Of course, we offer color box and outer pallets service if you demand;
Our tie rod ball joint workshops:including placing material, stamping, machining, riveting, assemble, adjusting, packing etc...
Our semi-finished suspension parts show:
Testing Equipment&Report
I. We only do OEM, produce high precisional suspension parts, different with other factories: attached our torque and tensile test machines
II.Quality guarantee: We promise to all of our old and new customers: ONE year guarantee or 50,000kms since B/L date, If we ship u wrong products or any quality problem, we will full compensation with free.
Attached our suspension tie rod ball joints test report:
Customer visits and our service team:
Attend exhibitions
Our certificates:
Our brand HDAG, POWERTRAC registration, license and export registration, our tie rod ball joint stabilizer link patents registration
Contact usWe take our reputation seriously, so we understand the value of trust. If you have any question, please don't hesitate to email us. We will reply you ASAP and try our best to solve your problem.
Our relative hot sale auto tie rod ball joint rack end stabilizer link control arms covering different car model of Toyota Honda MITSUBISHI NISSAN ISUZU SUZUKI MAZDA HYUNDAI KIA GM CHEVROLET BUICK FORD JEEP CHRYSLER DODGE FIAT OPEL RENAULT PEUGEOT VOLKSWAGEN AUDI BMW MERCEDES BENZ:Welcome contact us for sending interesting list by mail or whatsapp , THANKS
| MAZDA | |||||
| 8AB1-31-280 KB092-32-280 MB092-32-280 | BF67-32-240 | B038-32-135 BA29-32-135 | B092-34-550 B001-34-550 OK201-34-550C OK201-34-550D OK201-34-550E | S083-99-356 OK710-34-510 3252250 | B30H-28-170B |
| 8AB2-32-280 B455-32-280 8AB0-32-280 521136 | B456-32-24X | 1E00-32-240 | B455-34-550 | S083-99-354 S083-99-364 OK710-34-540 | LC62-32-170 LC62-34-170 LC62-34-170A LC62-34-170B |
| 8AG4-32-280 8AG3-32-280 GA2A-32-280 | B456-32-25X B455-32-24X FICZ-32-280A | D001-32-24X | B01A-34-550 B01A-34-550A BTDA-34-550 | 3874-99-354 3874-99-354B 0606-99-354 0603-99-354A 0603-34-354B D27Z-3049A D77Z-3049A | B26R-28-170 |
| UA01-99-323 UA01-99-322 E17Z-3A-130A E17Z-3A-130B | E016-32-25X E016-32-24X | D061-32-24XA | UB39-99-354 8AU1-34-540 UH71-34-540 | 3874-99-356 0603-99-356 0603-34-510 D27Z-3050A D77Z-3050A | B26R-34-170 |
| UA01-99-324 E17Z-3A-131A E17Z-3A-131B | B21H-32-25X | B001-32-240 | UB39-99-356 8AU2-34-510 UH71-34-550 | 8AU3-34-510 | GJ6A-34-250A |
| H001-99-324 8AH1-32-280 1391-99-322 OK201-32-280A OK201-32-280 | GJ22-32-240 GJ21-32-240 | G037-32-250A G037-32-250B G037-32-250C G037-32-250 E037-32-250C | UA01-99-356 E17Z-3050A | UA04-32-320 | GJ6A-34-170A |
| GJ22-34-350A GJ22-34-350B | G030-32-240 G030-32-240A E030-32-240A | S083-32-115 SA39-32-115 | UA01-99-354 E17Z-3049A | UA04-32-220 | GA2A-34-170A 3410592 KGA2A-34-150A |
| GJ22-34-300A GJ22-34-300B | G030-32-250 G030-32-250A G030-32-250C E030-32-250A | B092-32-250 | 8AU3-34-510 UH74-34-550 | GA2A-34-350A GA6B-34-350 | GA2A-34-150A 3410591 KGA2A-34-170A |
| B455-34-350 | G037-32-240A G037-32-240B G037-32-240C G037-32-240 | EA03-34-170 EA03-34-170A | G030-99-356 G030-32-240 H001-99-356 M001-99-356A GA6B-99-300E GA6B-99-350E GA6B-99-356 GA6B-99-356A | S083-49-350 | GA2C-28-170A GA2C-28-170B GA2B-28-170B 3799085 OK0A3-28-170A |
| B455-34-300 | GA2A-32-240 GA2A-32-250 1405940 | T0001-34-170 T0001-34-170A | GJ6A-34-J50B GJ6A-34-J00B | S083-49-300 | 1E00-34-170 1E00-34-170A |
| GA2A-34-300A GA6B-34-300 | GE4T-28-170 GE4T-12-8170 | BC1D-28-170A | D031-34-310A D031-34-320A | GJ6A-34-300A GJ6A-34-300B |
