Audited Supplier
W-M1
Metal
Steel
High
6 Layer
Double Sided
Chinese
2 Doors
Unfolded
Fixed
Grey
Customized
New
Mobile Storage Shelving Roller Racking Systems
6 Layer
Manual Handle
Shelf 1.2mm Shelf 0.8mm
80kgs / Layer
Solid Square 20*20 mm
Support
Ral Sheet
3 Point Lock
Electrostaic Powder Coating
Office, School,Hotel, Hospital,Company, Factory,
Woma
5 Tier Export Carton
H2360*W900*D560mm / Bay
China
940310000
Product Description
Mobile Storage Shelving Roller Racking Systems :
mobile high density shelving and roller racking systems can increase storage capacity by as much as 100% throughout a range of working environments. Whether you are storing archive materials, library books, office files or even retail stock items, a high density mobile storage solution (also known as rollastore or roller racking) can dramatically transform the efficiency of your office, library or stockroom.The main advantage of roller aisle racking is the large increase in capacity it gives when compared to static shelves. By eliminating the unused space between runs, this type of shelf compactor reduces the floor area that is required - thus allowing either more shelves to be fitted or a reduction in the space allocated to storage.
Mobile shelving consists of a secured enclosed shelving unit on a track at one end and a series of enclosed lockable shelving units that slide to allow access to contents within them and save isle space.
Details of the Storge Mobile Shelving/Mobile Shelving System/Warehouse Rack & Book Shelf :
Chassis: Welded chassis, steel is good, no deformation, the surface spray, the factory installed before the calibration test, 3mm hot plate bending, 204 universal bearing φ20mm short axis docking, the middle to galvanized pipe connection, front with dedicated Bearing, anti-tilt device.
Upright: 1.2mm thick Shanghai Baosteel SPCC cold-rolled plate bending forming, steel plate in line with GB / T11253-89 standards. Material for the SPCC, ST12 and Q195-235, partitions, side panels should be able to adjust the height along the vertical direction of the column, the column hanging plate hole spacing of 50mm.
Shelf board: 1.0mm Shanghai Baosteel SPCC cold-rolled plate, baffle bending thickness of 25mm, using three bending process, single-sided partition on the uniform load 80KG, 24 hours after unloading, no cracks and permanent deformation.
Sealing device: Magnetic seal, and a dust, anti-rat device.
Locking device:Each column can be locked, each combination can be locked.
Transmission mechanism: Integrated transmission mechanism, the factory assembly verification precision machining sprocket, indirect transmission, three speed, the use of motorcycle chain.
Handle: Free clutch-type folding handle or disc-type swing handle, the structure of the ratchet automatic hanging gear, disabled, the handle can be suspended in the vertical position.
Surface treatment: Surface by phosphating, pickling, electrostatic spray, etc. thirteen processing. Import Germany spray equipment, the use of Shanghai Phantom of the thermosetting powder, matt electrostatic spray.
Ground track: Using 20 * 20mm solid square steel, galvanized surface, back surface welding, limit device, 3mm rail protection plate surface spray.
Installation requirements:
After the installation of the track, in any 1m long, the horizontal difference of not more than 1mm, the corresponding deviation between the orbit level of not more than 1mm, the parallelism between the two tracks deviation of <0.1-0.3mm, the total length of not more than 2mm.
Size | H2360mm*W900mm*D560mm/receive customized |
Thickness | upright: 1.2mm, shelf : 0.8mm |
Surface | Electrostaic Powder coating |
Inner structure | double side shelves typeSemi-closed type Fully-closed type Hanging file folder type Gridding type |
Color | Gray(Ral 7047). or Ral color by your choose |
Structure | Knock-down |
Usage | Office, school,hotel, hospital,company, factory, and other commercial area. |
Function | Document stroage, office filing cabinet,display cabinet, etc |
Product Range | Mass shelf. compact rack, mobile file rack, goods shelf, book shelf, safe box, file cabinet,etc. |
Details of the Storge Mobile Shelving/Mobile Shelving System/Warehouse Rack & Book Shelf :
Chassis: Welded chassis, steel is good, no deformation, the surface spray, the factory installed before the calibration test, 3mm hot plate bending, 204 universal bearing φ20mm short axis docking, the middle to galvanized pipe connection, front with dedicated Bearing, anti-tilt device.
Upright: 1.2mm thick Shanghai Baosteel SPCC cold-rolled plate bending forming, steel plate in line with GB / T11253-89 standards. Material for the SPCC, ST12 and Q195-235, partitions, side panels should be able to adjust the height along the vertical direction of the column, the column hanging plate hole spacing of 50mm.
Shelf board: 1.0mm Shanghai Baosteel SPCC cold-rolled plate, baffle bending thickness of 25mm, using three bending process, single-sided partition on the uniform load 80KG, 24 hours after unloading, no cracks and permanent deformation.
Sealing device: Magnetic seal, and a dust, anti-rat device.
Locking device:Each column can be locked, each combination can be locked.
Transmission mechanism: Integrated transmission mechanism, the factory assembly verification precision machining sprocket, indirect transmission, three speed, the use of motorcycle chain.
Handle: Free clutch-type folding handle or disc-type swing handle, the structure of the ratchet automatic hanging gear, disabled, the handle can be suspended in the vertical position.
Surface treatment: Surface by phosphating, pickling, electrostatic spray, etc. thirteen processing. Import Germany spray equipment, the use of Shanghai Phantom of the thermosetting powder, matt electrostatic spray.
Ground track: Using 20 * 20mm solid square steel, galvanized surface, back surface welding, limit device, 3mm rail protection plate surface spray.
Installation requirements:
After the installation of the track, in any 1m long, the horizontal difference of not more than 1mm, the corresponding deviation between the orbit level of not more than 1mm, the parallelism between the two tracks deviation of <0.1-0.3mm, the total length of not more than 2mm.
