Audited Supplier
JZ-326S
Always
1 Year
Car Fault Detector
CE, ISO
by Internet
New
Standard
4 Kw / 5.5 Kw
3-Phase 4-Wire 380V 50/60Hz
0-2700 Bar
5 Bar
< 5 Um
20 L
20 L
38-42 'c
610 Kg
Gear Flow Sensor: 2 PCS
Gear Flow Sensor: 1 PCS
1440*1010*1640 mm
DC24V / DC12V
0-200 VDC (Max)
Frequency Converter
Jing Zheng Hong Ye
Wooden Case
1550*1200*1740 mm
Wuxi City, Jiangsu, China
9031200090
Product Description
Product Introduction
JZ-326S common rail injector test bench adopts full automatic control, which can conveniently repair and test Euro-3, Euro-4 injectors.
It can test thousands of injectors, including B-osch, D-elphi, D-enso, S-iemens, C-aterpillar and so on. The experimental data are complete.
JZ 326S HEUI/Common rail Intergrated Mahine is capapble of carrying out test of High-Pressure Common Rail Injector and
Medium-Pressure Common Rail Injector, having two-way operation comprising of push display panel, two switch operation room.
Functions Description
Standard Functions
1. All HEUI injectors can be tested
2. Engine oil/diesel leakage can be detected
3. The software controls the oil supply switch
4. HEUI has a separate diesel pump for fuel supply Oil pressure can be adjusted manual or automatic
JZ-326S common rail injector test bench adopts full automatic control, which can conveniently repair and test Euro-3, Euro-4 injectors.
It can test thousands of injectors, including B-osch, D-elphi, D-enso, S-iemens, C-aterpillar and so on. The experimental data are complete.
JZ 326S HEUI/Common rail Intergrated Mahine is capapble of carrying out test of High-Pressure Common Rail Injector and
Medium-Pressure Common Rail Injector, having two-way operation comprising of push display panel, two switch operation room.
Functions Description
Standard Functions
1. All HEUI injectors can be tested
2. Engine oil/diesel leakage can be detected
3. The software controls the oil supply switch
4. HEUI has a separate diesel pump for fuel supply Oil pressure can be adjusted manual or automatic
5. Oil pressure can be adjusted manual or automatic
First Sealing test
1. Diesel static sealing
2. Engine oil static sealing
3. Dynamic oil rerturn amount
Second, fuel Injection amount test
1. Max fuel injection test
2. Medium speed injection test
3. Idle fuel injection test
4. Pre-injection test
5. Start the fuel injection amount test
6. Oil return amount under various working conditions
Standard functions:
1. Test common rail injectors
2. Test the piezo fuel injectors
3. B-osch IQA code generation
4. Real-time display injection/return curves
Optional functions:
1. Test the 4-pin injector
2. D-enso injector QR code
3. S-iemens VDO-IIC coding
4. D-elphi C2i, C3i coding
5. B-osch piezo IMA, ISA coding
6. C-ummins injector correction code
Our Advantage
Testing Details
Technical Parameters
Related Products and Fixtures
Our Company
Packaging and Delivery
Exhibition
Why Choose Us
1. Our company has our own maintenance center with an area of 1200 square meters. It has been servicing the diesel fuel engine system for 20 years. Rich maintenance experience, let our products pay more attention to solving the difficult problems in maintenance.
2. Independent design and development team,and produce experience.
3. Almost all important parts of the equipment are come from top suppliers in the industry.
4. Strict QC, good pre-sale and after-sale service, Providing remote assistance services free.
5. Customized according to customer requirements, such as appearance, color, etc.
Contact Us
Keith/ Djamel | Sales
+86 1891 5270881
Wuxi Jia Miao Auto Technology Co., Ltd
Wuxi Chengshunda Automobile Technology Co., Ltd.
Address: No. 117 Xinzhuang Road, Zhutang Town Wuxi City, Jiangsu Province, China
Website: jm888888.en.made-in-china.com
First Sealing test
1. Diesel static sealing
2. Engine oil static sealing
3. Dynamic oil rerturn amount
Second, fuel Injection amount test
1. Max fuel injection test
2. Medium speed injection test
3. Idle fuel injection test
4. Pre-injection test
5. Start the fuel injection amount test
6. Oil return amount under various working conditions
Standard functions:
1. Test common rail injectors
2. Test the piezo fuel injectors
3. B-osch IQA code generation
4. Real-time display injection/return curves
Optional functions:
1. Test the 4-pin injector
2. D-enso injector QR code
3. S-iemens VDO-IIC coding
4. D-elphi C2i, C3i coding
5. B-osch piezo IMA, ISA coding
6. C-ummins injector correction code
Our Advantage
| Hardware advantage |
| 1. Motor power is 6.5 KW |
| 2. Air-cooled heat dissipation kit |
| 3. Metering valve detect the fuel flow |
| 4. Imported flow sensor from Germany |
| 5. Equipped with B-osch genuine DRV |
| 6. Equipped with B-osch genuine CP3 pump |
| 7. Equipped with B-osch genuine common rail tube |
| 8. Oil tank (including heating,refrigeration,liquid level detection,temperature detection) |
| 9. Short-circuit protection, ground protection, over-pressure protection during the testing |
| 10. Equipped frequency converter to achieve testing function under different speed conditions |
| 11. Equipped precise filter before flow sensor, which can effectively keep the sensor clean and extend the flow sensor usage life |
| Software advantage |
| 1. Timing injection responding sensing system of the injectors |
| 2. Coding system, can generate different compensation codes and correction codes |
| 3. Measurement system of resistance and inductance of injector's solenoid valve |
| 4. More than 3000 test data used for different brands injectors and pumps calibrations |
| 5. Data backup, system software and database upgrade free charge all the time by remote |
| 6. Electronic measuring system, automatic testing the fuel quantity of all working conditions, and generate report after testing |
| 7. Automatic test injectors under different working conditions, automatic analysis results, and generate report after testing |
| 8. Intelligent algorithm is used to automatically calibrate the fuel quantity of the new injector, and generate reports after testing |
Testing Details
Technical Parameters
| Technical Parameters | |
| Output | 4 KW / 5.5 KW |
| Power | 3-Phase 4-Wire 380V 50/60HZ |
| Rail Pressure | 0~2700 Bar |
| Rail Pressure Precision | ±5 Bar |
| Tank Volume | 20L/20L |
| Fuel Temperature | 40±2ºC |
| Filter Precision | < 5μm |
| Gross Weight | 500 kg |
| Packing Size | 1450×1050×1650 mm |
| Speed Control Model | Converter Control |
| Temperature Control System | Air-Cooled Heat Dissipation |
| Nozzle Sensor | Imported Original Elliptical Type Flow Sensor |
| Language | English, Spanish, Russian,etc |
| Material | Metal Plate |
| Painting | Powder Painting, Durable |
| Color | Green (can be customized) |
| Logo | Jing Zheng Hong Ye (can be customized) |
| MOQ | 1 Piece |
| Payment | 40%Deposit, the rest paid before delivery |
| Warranty Time | 12 months |
| Delivery time | 30 days after prepaid |
| Shipping Packing | Wooden Case |
Related Products and Fixtures
Our Company
Packaging and Delivery
Exhibition
Why Choose Us
1. Our company has our own maintenance center with an area of 1200 square meters. It has been servicing the diesel fuel engine system for 20 years. Rich maintenance experience, let our products pay more attention to solving the difficult problems in maintenance.
2. Independent design and development team,and produce experience.
3. Almost all important parts of the equipment are come from top suppliers in the industry.
4. Strict QC, good pre-sale and after-sale service, Providing remote assistance services free.
5. Customized according to customer requirements, such as appearance, color, etc.
Contact Us
Keith/ Djamel | Sales
+86 1891 5270881
Wuxi Jia Miao Auto Technology Co., Ltd
Wuxi Chengshunda Automobile Technology Co., Ltd.
Address: No. 117 Xinzhuang Road, Zhutang Town Wuxi City, Jiangsu Province, China
Website: jm888888.en.made-in-china.com
