Audited Supplier
KFQ-2600
Installation and Startup
12 Months
Paper Package
Coil Paper Slitting Machine
Round Knife Cutting
Frame Part
Case
Jumbo Roll Slitting
Final Inspection
Paper
Paper
1800mm
1500mm
2600mm
Maxi 400m/Min
60 Days
MAYKWA
40gp Container
8500× 4500× 2700mm/19000kg
China
8441100000
Product Description
KFQ-2600 Frame Type Automatic Aomputerized High-speed Jumbo Roll Slitting and Rewinding Machine
Features.
This machine is suitable for slitting and rewinding all kinds of super-large roll materials. Such as: various rolls of cardboard, kraft paper, double-gum paper, coated paper, silicone oil paper, film paper, glossy paper, wrapping paper, carbonless paper, filter paper, non-woven fabrics, paper-plastic composite and other coils of slitting, rewinding and so on.
Performance and Characteristics.
(1) The machine adopts servo motor synchronous control, automatic taper tension, center winding method;
(2) The machine adopts frequency conversion speed control to keep smooth running in acceleration;
(3) Automatic meter counting, alarm and other functions;
(4) PLC touch screen control is adopted;
(5)The rewinding adopts front and rear A and B air expansion axis structure, linear guide unloading, easy loading and unloading operation;
(6) Unwinding adopts automatic edge correction system, so that irregular materials can be slit normally;
(7) Waste edge adopts high-pressure fan automatic suction and exclusion;
(8) Linear guide hydraulic shaftless automatic loading device;
Technical Parameter:
Technical specification and its Configuration:
Features.This machine is suitable for slitting and rewinding all kinds of super-large roll materials. Such as: various rolls of cardboard, kraft paper, double-gum paper, coated paper, silicone oil paper, film paper, glossy paper, wrapping paper, carbonless paper, filter paper, non-woven fabrics, paper-plastic composite and other coils of slitting, rewinding and so on.
Performance and Characteristics.
(1) The machine adopts servo motor synchronous control, automatic taper tension, center winding method;
(2) The machine adopts frequency conversion speed control to keep smooth running in acceleration;
(3) Automatic meter counting, alarm and other functions;
(4) PLC touch screen control is adopted;
(5)The rewinding adopts front and rear A and B air expansion axis structure, linear guide unloading, easy loading and unloading operation;
(6) Unwinding adopts automatic edge correction system, so that irregular materials can be slit normally;
(7) Waste edge adopts high-pressure fan automatic suction and exclusion;
(8) Linear guide hydraulic shaftless automatic loading device;
Technical Parameter:
| Model | KFQ-2100 | KFQ-2400 | KFQ-2600 | KFQ-2800 |
| Maxi Unwing Width | 2100mm | 2400mm | 2600mm | 2800mm |
| Max Unwind Dia | ¢1800mm | |||
| Mini width of slitting | 40mm | |||
| Max Rewind Dia | ¢1500mm | |||
| Slitting Speed | ¢400m/min | |||
| Total Power | 56kw | |||
| Outer Dimension | 8.5*4.5*2.7m | 8.5*4.8*2.7m | 8.5*5*2.7m | 8.5*5.2*2.7m |
| Weight | 17000kg | 18000kg | 19000kg | 20000kg |
| Power Supply | 380V/220V 50/60HZ 3PH | |||
| Unwinding section: (with hydraulic shaftless automatic loading structure) | |
| 1.Left and right movement adopts linear guide rail 2.Adopts shaftless automatic loading structure 3.Deskewing adopts Aibo deskewing control structure 4.Ultrasonic structure is adopted for tracking 5.Tension control: automatic pneumatic tension control system. 6.Substrate can be adjusted left, right and parallel: manual/automatic operation. |  |
| Mainframe section: (with active traction construction method) | |
| 1. Structure type: active traction pneumatic compression mode 2. Driving mode: the main motor drives the main drive shaft, and the main shaft drives the active roller traction. 3. Pressing mode adopts cylinder control. |  |
| Winding device structure mode: (front and rear A/B air-expanded shaft winding) | |
| 1.Adopting center winding double structure up and down winding line type 2.Double air expansion axis winding structure way at the same time winding 3.The mechanical arm adopts linear guide rail operation mode. 4.The principle of surface winding form is: the winding shaft is close to the aluminum guide rollers for synchronous winding. 5.Automatic motorized unloading device is adopted for winding up and down. |  |
| Control section: (centralized control using linked control cabinets and distribution boxes) | |
| 1.Host control: including the main motor control, main control box, winding motor servo vector control, pneumatic control box 2.With electronic meter counting; alarm stop; automatic length fixing. 3.Cutting length stop and winding diameter stop can be preset. |  |
