Audited Supplier
Gas Treatment Device
1. Filtering Device and Storage Canister: When embarking on treatment engineering, these components are essentials that customers typically need to have already in place.
2.Desulfurization Device
Requirements for the Gas
1.The gas must be meticulously free from any floating water or dissociative substances.
2. The gas's thermal value must be a robust ≥5000 kcal/l. If it dips below this benchmark, expect a notable decline in the power output of the gas generator sets.
3.The sulfur content should steadfastly not exceed 250 mg/m³. Should the sulfur exceed this threshold, a comprehensive desulfurization process becomes imperative.
Note: A high sulfur content poses a serious threat, potentially causing severe damage to critical engine components.
| Model | Voltage (V) | Frequency(Hz) | Power(kW) | Speed (r/min) | Dimension(mm) | Weight (kg) |
| AP4DG-30N5LC | 400 | 50 | 30 | 1500 | 1900×720×920 | 1000 |
| AP4DG-50N5LC | 400 | 50 | 50 | 1500 | 1900×720×920 | 1020 |
| AP4GG-60N5LC | 400 | 50 | 60 | 1500 | 1900×720×930 | 1100 |
| AP6GG-80N5LC | 400 | 50 | 80 | 1500 | 2400×980×1450 | 1200 |
| AP6GG-100N5LC | 400 | 50 | 100 | 1500 | 2400×980×1450 | 1250 |
| AP6MKG-150N5LC | 400 | 50 | 150 | 1500 | 2900×1030×1780 | 2500 |
| AP6MKG-180N5LC | 400 | 50 | 180 | 1500 | 2900×1030×1780 | 2500 |
| AP6KG-200N5LC | 400 | 50 | 200 | 1500 | 3100×1300×1780 | 3200 |
| AP6KG-250N5LC | 400 | 50 | 250 | 1500 | 3100×1300×1780 | 3200 |
| AP6TG-300N5LC | 400 | 50 | 300 | 1500 | 3200×1400×1800 | 3800 |
| AP6TDG-350N5LC | 400 | 50 | 350 | 1500 | 3270×1850×2150 | 5500 |
| AP6TFG-500N5LC | 400 | 50 | 500 | 1500 | 3600×1500×2100 | 7400 |
| AP6CG-500N5LC | 400 | 50 | 500 | 1500 | 4110×1633×2110 | 8890 |
| AP6CG-600N5LC | 400 | 50 | 600 | 1500 | 4110×1630×2110 | 8890 |
| AP12VTDG-700N5LC | 400 | 50 | 700 | 1500 | 3850×1950×2370 | 8490 |
| AP12VTDG-700N5HC | 10500 | 50 | 700 | 1500 | 4415×2000×2370 | 9735 |
| AP12VTDG-800N5LC | 400 | 50 | 800 | 1500 | 3850×1950×2370 | 8490 |
| AP12VTDG-800N5HC | 10500 | 50 | 800 | 1500 | 4415×2000×2370 | 9735 |
| AP12VCG-1000N5LC | 400 | 50 | 1000 | 1000 | 5190×2110×2660 | 16000 |
| AP12VCG-1000N5HC | 10500 | 50 | 1000 | 1000 | 5480×2110×2690 | 17000 |
| AP16VTDG-1100N5LC | 400 | 50 | 1100 | 1500 | 4620×1990×2280 | 11700 |
| AP16VTDG-1100N5HC | 10500 | 50 | 1100 | 1500 | 5480×1990×2280 | 13750 |
| AP16VCG-1500N5LC | 400 | 50 | 1500 | 1000 | 6030×2090×2745 | 22500 |
| AP16VCG-1500N5HC | 10500 | 50 | 1500 | 1000 | 6030×2090×2645 | 22610 |
| AP16VCG-2000N5LC | 400 | 50 | 2000 | 1500 | 8420×2055×2890 | 24800 |
| AP16VCG-2000N5HC | 10500 | 50 | 2000 | 1500 | 8835×2055×2890 | 25500 |
| Manufacturer of control panel | Smartgen brand HGM6120U |
| Main function | 2.Acrylic screen, improved wearable and scratch resistance property; 3.Silica-gel panel and keys can well adapt to higher and lower temperature; 4.With RS485 communication port, can achieve "three remote" functions via MODBUS protocol; 5.Adapt to 3P4W, 3P3W, 1P2W and 2P3W (120V/240V), 50Hz/60Hz AC power system; 6.Can measure and display 3 phase voltage, 3 phase current, frequency, power parameter of mains/gens; 7.Mains have functions of over/under voltage and lack of phase; Gens have functions of over/under voltage, over/under frequency and over current; 8.Precision measure and display of parameters about engine, 9.Control protection: Automatic start/stop of genset, load transfer(ATS control) and perfect failure display and protection; 10.With ETS, idle speed control, pre-heat control, speed droop/raising control, all of them are relay output; 11.Parameter setting: Allow user to modify setting and store them in internal FLASH memory. The parameters cannot be lost even when power off. All of parameters can be set not only from the front panel, but also use programmable interface (or PS485 interface) to adjust them via PC.; 12.Multi sensors of temperature, pressure and fuel level can be used directly, parameters can be defined by user; 13.Multi conditions of crank disconnect (speed sensor, oil pressure, generator) can be selected; 14.Power supply range: (8~35)VDC, accommodating to different starting battery volts; 15.All parameters use digital modulation, instead of analog modulation using conventional potentiometer, having improved reliability and stability; 16.Add rubber gasket between shell and controller screen, the waterproof can reach IP55; 17.Controller is fixed by metal fixing clips; 18.Modular design, flame-retardant ABS shell, embedded mounting, compact structure and easy installation. |
| ATS | Chinese brand together with generator |
Delve into the Exceptional Benefits of Our Unique Single Fuel Gas Gen Sets Against Industry BenchmarksUnveil how our products excel and shinebeyond those in the competitive market:
1,Outfitted with a state-of-the-art Hall Effect Sensor and a robust high-energy ignition system, ensuring seamless ignition and a hassle-free start-up experience.
2,Featuring advanced electric governors from the USA technology and pioneering gas regulation systems from the UK technology providing unmatched operational reliability.
3,Our gen sets are engineered for parallel multi-set operations and effortless web integration, maximizing total capacity and simplifying maintenance tasks, ensuring relentless production for customers. Such design guarantees seamless continuity in your production operations.
4,Equipped with engines designed for reduced rated power, we ensure heightened engine reliability and extended durability.
5,The spare parts predominantly share compatibility with original diesel engines, making maintenance straightforward and convenient. The spark plug's price stands at a mere2 USD each, cutting down overall operational costs.
6,These generators are engineered for exceptional economic performance with minimal operational expenditure.
7,By utilizing gas fuel, carbon accumulation is minimized, significantly reducing wear on cylinder liners and gas valve seats. This greatly extends the lifespan of our generative sets.
8,Utilizing a sophisticated control panel, these gen sets provide comprehensive protection features for optimum operational safety.
