Audited Supplier
Brief description
HG500X500 High frequency welded pipe production line is used to manufacture welded square tube 200x200-500x500mm, thickness 10-20mm. This line adopt Direct Forming Square technology which have below advantages:
1) In a very short period of time to finish the adjustment of the roller, extreme reduce the roller change time when replace the products, thus improve the efficiency and reduce the productive cost;
2) Due to the equipment adopts one set of combined mould, producing the different specifications of the tube, only need to adjust,no need to change,the roller savings rate at above 90%,thus reducing the cost of the roller; Need change up roller for final open stand when produce 100x100mm tube.
3) With servo motor adjustment, decreased the input of tools and damage to equipment when change the roll, improve the service life of the equipment.
4) Due to structure of the composite roll,the point contact between the roll and strip instead of the original line contact,reduce the roll wear and improve the service life of roll.
| (1)Raw material | |
| material quality | Q195,Q235B,Q355B,Galvanized Steel,MS,CR,HR |
| mechanical properties | σb≤500Mpa,σs≤325MPa |
| strip width | 800-1200mm |
| strip thickness | 10.0-20.0mm |
| coil ID | Φ508-610mm |
| coil OD | Φ1200mm-2100mm |
| coil weight | 30.0T |
| (2)Finished product size and purpose | |
| tube size | 200×200-500×500mm T:10.0-20.0mm |
| length | 4-6m |
| Application | Structure |
MACHINE LIST
| Model | Diameter(mm) | Wall THickness(mm) | Speed(m/min) | main power(kw) | HF power(kw) |
| HG12 | 7-16 | 0.2-0.6 | 20-120 | 30*1 | 100 |
| HG16 | 8-25 | 0.2-1 | 20-120 | 37*1 | 100 |
| HG25 | 8-32 | 0.8-1.3 | 20-120 | 45*1 | 100 |
| HG28 | 8-42 | 0.3-1.8 | 20-120 | 75/90*1 | 150 |
| HG32 | 16-50.8 | 0.6-2 | 20-120 | 110/132*1 | 150 |
| HG45 | 19-50.8 | 0.7-2.5 | 20-120 | 132*1 | 150 |
| HG50 | 19-63.5 | 0.7-2.5 | 20-120 | 132*1 | 200 |
| HG50(E) | 19-76 | 0.7-2.5 | 20-120 | 160*1 | 200 |
| HG60 | 19-76 | 0.8-3 | 20-100 | 185*1 | 250 |
| HG76 | 25-80 | 1.2-4 | 20-70 | 200*1 | 300 |
| HG76(E) | 32-127 | 1.2-3 | 20-90 | 132*2 | 300 |
| HG90 | 30-90 | 1.5-4.5 | 20-60 | 110*2 | 400 |
| HG115 | 38-115 | 2-5 | 20-60 | 160*2 | 400 |
| HG165 | 60-165 | 2-6 | 15-50 | 200*2 | 500 |
| HG219 | 90*219 | 3-8 | 15-50 | 250*2 | 600 |
| HG273 | 165-273 | 4-10 | 15-40 | 250*1 165*2 | 800 |
| HG365 | 219-365 | 4-12 | 15-30 | 250*2 200*2 | 1200 |
| .... | .... | .... | .... | .... | .... |
1.) We will send the engineer for the installation and training your workers how to operate this machine in correct way.
2.) Warranty Team
One year quality guarantee, life guarantee repair. Within quality guarantee period, except for failures caused by human error, repair parts will be provided for free. After the quality guarantee period, only charge the cost of the spare parts.
3.) We supply the pre-sell and after-sell service.
pre-sell service: workshop design, and production output design
after-sell service: installation and training, and the skilled engineer for working.
4.) We can also sent the engineer working for you serval months or 1 year. The engineer will help you to improve the output, reduce the waste and decrease the cost.
5.) We supply the pre-sell service-Design for whole project for stainless steel pipe making/ carbon steel pipe making.
6.) We will be responsible for the loading and shipping .
Q1: Are you manufacturer or trading company?
A1: we are manufactuer , more than 20 years experience.
Q2: What is the max size of pipe you have even produce?
A2: Max φ630mm
Q3:Can I visit your customer machine line?
A3: Yes, but I need to get agreement from my customer firslty.
Q4: what is your machine advantages?
A4:Contain Full automatic, Direct forming square, Share rollers. Fast change system
Q5:How I can get the quotation?
A5:Please send your requires of pipe size , thickness to us.
