Audited Supplier
MEVS-06A
Conveyer Equipment, Packaging Machinery, Food Machinery, Mining Equipment
Oxygenation
Stainless Steel
Integration
Analog Sensor
Circular Wheel Speed Sensor
Stainless Steel
2mm Max
Yes
30- 6000rpm
Yuanben
Carton
Shanghai
9026100000
Product Description
Magnetic Pickup Speed Sensor MEVS Series
MEVS series speed sensor is installed perpendicular to the rotation direction of the gear. When the gear is driven to rotate by the measured shaft, the tooth top and tooth valley of the gear tooth pass through the sensor detection end alternately, which makes the air gap between the sensor pole shoe end and the gear tooth alternately change, causing the magnetic circuit magnetic resistance of the sensor to change alternately.
The sensor outputs an AC signal. Every time the gear rotates a tooth, the signal just goes through a cycle, so the frequency of the output signal is directly proportional to the gear speed. Gear speed = signal frequency × 60 / gear teeth number. The number of gear teeth is fixed, and the speed of the measured shaft can be known after the frequency meter measures the signal frequency. It has the advantages of small volume and reliable performance. It can detect the speed of gear and keyway continuously.
Features:
1.competitive price, robust proven speed and position sensing technology
2.self-generating electrical signal requires no external power supply
3.fewer wiring connections contribute to excellent reliability
4.meet a wide range of output ,resistance and inductane requirements, so the sensor can be tailored to meet specific customer's requirements
Specifications
Photos
MEVS series speed sensor is installed perpendicular to the rotation direction of the gear. When the gear is driven to rotate by the measured shaft, the tooth top and tooth valley of the gear tooth pass through the sensor detection end alternately, which makes the air gap between the sensor pole shoe end and the gear tooth alternately change, causing the magnetic circuit magnetic resistance of the sensor to change alternately.
The sensor outputs an AC signal. Every time the gear rotates a tooth, the signal just goes through a cycle, so the frequency of the output signal is directly proportional to the gear speed. Gear speed = signal frequency × 60 / gear teeth number. The number of gear teeth is fixed, and the speed of the measured shaft can be known after the frequency meter measures the signal frequency. It has the advantages of small volume and reliable performance. It can detect the speed of gear and keyway continuously.
Features:
1.competitive price, robust proven speed and position sensing technology
2.self-generating electrical signal requires no external power supply
3.fewer wiring connections contribute to excellent reliability
4.meet a wide range of output ,resistance and inductane requirements, so the sensor can be tailored to meet specific customer's requirements
Specifications
| Item | Parameter | Remark |
| Model | MEVS-A-0.13-A-2000 | |
| Product Code | MEVS-06A | |
| Main Material | Stainless Steel | |
| Internal Resistance | 1K±15% | |
| Electrical Inductance | 250mH±20% | |
| Load Resistance | 100K min | |
| Output Channel | Signal Channel | |
| Sensing Distance | 2mm max | |
| Measuring Range (Response Frequency) | 0-20KHz | |
| Output Mode | sine wave | |
| Signal Amplitude(P-P) | VOL≥0.5V | Interval 0.13mm,30times/minute |
| VOH≥100V | Interval 0.13mm,6300times/minute | |
| Protection Type | Reverse polarity protection | |
| Insulation Resistance | 50M min | |
| Electrical Connection | UL2902/24#(Grey) | Shielded sheathed wire |
| Strength of Extension | 5kg | Between wire and housing |
| Service Life | 3 years | |
| Ambient Temperature | 0-75ºC | |
| Humidity | 90%max | |
| Mechanical Vibration | 7g | f=20-400Hz, each direction |
| Mechanical Shock | 10g/16ms | 1000 Times, each direction |
| Protection Grade | IP65 | |
| ESD Protection | 4.5KV | |
| Electrical Field Disturbance | 200V/m | |
| Installation and Use | Mounting Thread | M10×1 mounting thread with 1 locknut, the end# knurling |
| Measuring Gear (Min.) | 220pitch,60teeth low carbon steel material | |
| Mounting Direction | Sensor axis vertical to gear normal | |
| Applications | Spark control system of intelligent engine, ABS automobile anti-lock brake system, speed measurement, rotational speed measurement for textile and metallurgy equipment | |
Photos
