Audited Supplier
Durethan AKV15H2.0 901510
1.Key Features:
- Translucent or opaque milky white appearance
- Lightweight thermoplastic material
- Good toughness and chemical resistance
- Exceptional wear resistance, surpassing other fibers
- High strength compared to cotton, wool, and viscose fiber
- Widely used in the industry field for various components
2.Applications:
- Automobile industry
- Engineering industry
- Production of single-purpose machine
For your engineering projects, Suzhou Furenxiang Trade Co., Ltd. offers MOQ 25kg PA6, an industrial-grade plastic granule that provides increased toughness and durability. This PA6 compound is reinforced with 10% glass fiber, making it suitable for injection molding and other applications. With its excellent properties, this PA6 GF10 compound is a reliable choice for any project.
Durethan AKV15H2.0 901510
PA 66, 15% glass fibers, injection molding, heat-aging stabilized
| Property Test Condition Unit Standard guide value d.a.m.cond | |||||
| Rheological properties | |||||
| C Molding shrinkage,parallel | 60x60x2;290°ºC/MT 80% C;600 bar | IS0294-4 | 0.7 | ||
| CMolding shrinkage,transverse | 60x60x2:290*C/MT C;600 bar | 80% | IS0294-4 | 1.0 | |
| Post-shrinkage,parallel | 60x60x2;120C;4 h | % | IS0294-4 | 0.2 | |
| Post-shrinkage,transverse | 60x60x2;120°C;4 h | % | IS0294-4 | 0.2 | |
| Mechanical properties (23 ºC/50%r. | h.) | ||||
| C Tensile modulus | 1 mm/min | MPa | ISO527-1,-2 | 6200 | 3800 |
| C Tensile Stress atbreak | 5 mm/min | MPa | IS0527-1,-2 | 120 | 75 |
| C Tensile Strain at break | 5 mm/min | % | IS0527-1,-2 | 3.0 | 18 |
| C Charpy impact strength | 23C | kJ/m² | IS0179-1eU | 35 | 60 |
| C Charpy impact strength | -30ºC | kJ/m² | IS0179-1eU | 35 | 40 |
| C Charpy notched impact strength | 23 ºC | kJ/m² | IS0179-1eA | <10 | <10 |
| C Charpy notched impact strength | -30C | kJ/m² | IS0179-1eA | <10 | <10 |
| Charpy notchedimpact strength | -40C | kJ/m² | IS0179-1eA | <10 | <10 |
| lzod impact strength | 23ºC | kJ/m² | IS0180-1U | 30 | 45 |
| lzod impact strength | -30°C | kJ/m² | IS0180-1U | 30 | 35 |
| lzod notched impact strength | 23°ºC | kJ/m² | IS0180-1A | <10 | <10 |
| lzod notched impact strength | -30C | kJ/m² | IS0180-1A | <10 | <10 |
| Fiexural modulus | 2 mm/min | MPa | IS0178-A | 5200 | 3200 |
| Flexural strength | 2 mm/min | MPa | IS0178-A | 200 | 110 |
| Flexural strain at fiexural strength | 2 mm/min | % | IS0178-A | 4.0 | 8.0 |
| Flexural stress at 3.5%strain | 2 mm/min | MPa | IS0178-A | 175 | 90 |
| C Puncture maximum force | 23°ºC | N | IS06603-2 | 610 | 816 |
| C Puncture maximum force | -30°C | N | IS06603-2 | 590 | |
| C Puncture energy | 23°C | J | IS06603-2 | 1.7 | 2.1 |
| C Puncture energy | -30C | J | IS06603-2 | 0.7 | |
| Ball indentation hardness | N/mm² | IS02039-1 | 190 | 100 | |
| Thermal properties | |||||
| C Melting temperature | 10°C/min | 10°C/min | IS011357-1,-3 | 263 | |
| C Temperature of deflection under | load 1.80 MPa | C | IS075-1,-2 | 230 | |
| C Temperature of deflection under | load 0.45 MPa | C | ISO 75-1,-2 | >250 | |
| Vicat softening temperature | 50N;120°C/h | C | IS0306 | >230 | |
| C Coefficientof linear thermal expansion,parallel | 23 to 55°ºC | 10-4/K | ISO 11359-1,-2 | 0.4 | |
| C Coefficient of linear thermal expansion,transverse | 23 to 55°C | 10-4/K | ISO 11359-1,-2 | 0.9 | |
| C Burningbehavior UL94 | 1.5 mm | Class | UL 94 | HB | |
| C Burning behavior UL94 | 0.75 mm | Class | UL 94 | HB | |
| COxygen index | Method A | % | IS04589-2 | 24 | |
| Resistance to heat (ball pressure | test) | C | IEC 60695-10-2 | 248 | |
| Glow wire test (GWFI) | 2.0 mm | C | IEC 60695-2-12 | 650 | |
| Burning behavior US-FMVSS302 | >=1.0mm | IS03795 | passed | ||
| Torsional storage modulus | MPa | IS06721-2 | 1300 | ||
| Torsional loss modulus | MPa | IS06721-2 | 0.008 | ||
| Loss factor | IS06721-2 | 0.02 | |||
| C Vicat softening temperature | 50 N;50°C/h | C | IS0306 | 230 | |
| Electrical properties (23 ºC/50 %r.h.) | |||||
| C Relative permittivity C Relative permittivity | 100 Hz 1 MHz | IEC 60250 IEC 60250 | 4.0 4.0 | 9.0 4.0 | |
| CDissipationfactor 100 Hz | 10-4 | IEC 60250 | 90 | 2200 | |
| C Dissipation factor 1 MHz | 10-4 | IEC 60250 | 170 | 700 | |
| C Volume resistivity | Ohm-m | IEC62631-3 | 1E13 | 1E10 | |
| C Surface resistivity | Ohm | IEC 62631-3 | 1E15 | 1E12 | |
| C Electric strength 1 mm | kV/mm | IEC 60243-1 | 35 | 35 | |
| C Comparative tracking index CTI Solution A | Rating | IEC 60112 | 425 | ||
| Other properties (23°C) C Water absorption (Saturation value)Water at 23°C | % | IS062 | 7 | ||
| C Water absorption(Equilibrium value)23 °C;50%RH | % | IS062 | 2.4 | ||
| C Density | kg/m² | IS01183 | 1240 | ||
| Bulk density | kg/m² | IS060 | 600 | ||
Introducing our High-Quality MOQ 25kg PA6 Engineering Plastics
Looking for top-notch engineering plastics for your project? Look no further! Suzhou Furenxiang Trade Co., Ltd. is here to provide you with our high-quality MOQ 25kg PA6 engineering plastics. With over 10 years of factory experience, we guarantee professional service and exceptional quality.
Our PA6 is a German-made product, specifically the B3EG6 from Germany and the B3S from Shanghai. It's a reinforced pellet made of nylon, also known as polyamide. The PA6 GF10 compound contains 10% glass fiber, giving it increased toughness and strength.
These industrial-grade plastic granules are perfect for injection molding and can be customized to meet your specific requirements. The PA6 GF10 compound is ideal for applications that demand high durability and impact resistance.
What's even better is that our reasonable prices allow you to enjoy the benefits of using high-quality plastic resin material without breaking the bank. Plus, our perfect service management system ensures a smooth and hassle-free experience for our customers.
Choose Suzhou Furenxiang Trade Co., Ltd. for all your engineering plastics needs. Contact us today to discuss your project requirements and place your order.
COMPANY INFORMATION | |
Our company is a plastic manufacturer and agent for internationally renowned brands: 1. Kunshan Lizhao Plastic Co., Ltd. Was established in 2009 with a registered capital of 21.24 million yuan and an area of 20, 000 square meters. Our company has 14 high-speed production lines and 3 R&D experimental production lines, with a monthly production capacity of 3, 500 tons. Our company specializes in R&D and production of PP PBT PA6 PA66 PPA PC PC/ABS. The company has first-class production equipment and is equipped with professional product laboratories, testing rooms, and sample warehouses. We always adhere to the principle of "quality first" and strive for perfection. Our company has IS09001: 2008 quality system certification and ISO/TS16949-2009 automotive quality system certification. The company starts from selecting the best raw materials and standardizes, processes and institutionalizes product processing. Our materials are widely used in automobile manufacturing, household appliances, communication electronics, industrial equipment and other industries. 2. Suzhou Furenxiang Trading Co., Ltd. Was established in 2016 and is committed to the import and export of our own materials and internationally renowned brand materials. Sales brands include: DuPont, Covestro, Polytechnic, Asahi Kasei, Teijin, LG EMS. Model types include: PP PC PC/ABS ABS PPO PBT POM PA6 PA66 PPA LCP TPE TPU ASA PCR (PC/ABS PC/PET), etc. |
A:PLA,PCTG,ABS,EAA,POM,EVA,POE,PPSU,EMAA,PA66,PC,PC/ABS,PE,POP.
Q:Can we get your samples?
A:Yes! Samples can be arranged for those available products. The Delivery Fee will be on buyer's account.
Q:What are your terms of payment?
A:T/T, L/C,D/P,D/A. Option A:30% pay in advance, 70% before shipping
Q:What is your packing?
A:Basically our packing is in 25/KG bags.
Q:Where is the loading port?
A:Usually Shanghai.
Q:What is the normal lead time?
A: We will send goods to departure port within 7-15 workdays after we receive your payment.
Q:If any quality problem, how can you settle it for us?
A:When discharging the container, you need to inspect all the goods. If anybreakage or defect products were found, you MUST take the pictures fromthe original carton. All the claims must be presented within 7 working days after discharging the container.This date is subject the arrival time of container. We will advise you to certify the claim by third party,or we can accept the claim from the samples or pictures you present, discharging of the containeris not included. Finally we will completely compensate all your loss.
