Audited Supplier
ZY8000Y
Remote Pressure Transmitter
Diffused Silicon Pressure Transmitter
Gas, Steam, Liquid
0.1%F.S, 0.25%F.S, 0.5%F.S
0-10MPa
IP67
C.C.C, I.S.O 9001, E.C.M, E.a.C, P.a.C,S.I.L,
Customized
2kg
>50, 000.00 Sets
4-20 Ma, Mod Bus, PA
-30~70 Celsius Degree
<=0.03%F.S/Year
2-M 20*1.5, 2-1/2 N.P.T
1/4 N.P.T
<=90ms
50:1
316 L, H C, Tantalum, 316 L Gold Plating
Direct Mounting, Flange or Rack
24 V D.C
-40~200 Celsius Degree
Exd II CT6 GB, Exia II CT6 Ga
CAMCT
Carton, Plywood Case
20CM*10CM*30CM
China
Product Description
ZY8000Y Intelligent Remote Transmitter
State-of-the-Art Intelligent Flange Remote Transmitter Sensing
Precisely measures the
pressure through advanced remote
transmission technology
devices, and then transmits data to the transmitter
via oil-filled capillary for accurate measurement.
Capable of measuring liquid level and differential pressure (D/P), ideal for high-temperature scenarios (requiring the transmitter to be positioned remotely),
as well as high viscosity, easy-to-precipitate crystalline, or corrosive media. Extensively utilized across petroleum, chemical industry, metallurgy, power, environmental protection, new energy, and machinery equipment industries.
State-of-the-Art Intelligent Flange Remote Transmitter Sensing
Precisely measures the
pressure through advanced remote
transmission technology
devices, and then transmits data to the transmitter
via oil-filled capillary for accurate measurement.
Capable of measuring liquid level and differential pressure (D/P), ideal for high-temperature scenarios (requiring the transmitter to be positioned remotely),
as well as high viscosity, easy-to-precipitate crystalline, or corrosive media. Extensively utilized across petroleum, chemical industry, metallurgy, power, environmental protection, new energy, and machinery equipment industries.
Introducing the ZY8000: a marvel of precision engineering. With an intelligent transmitter boasting a basic accuracy of 0.1% FS-and peaking at an impressive 0.075% FS-this instrument maintains 99.9% accuracy even after a decade of continuous operation, ensuring substantial maintenance cost savings. Encased in a robust metal housing with fully sealed measuring elements, it effortlessly withstands extreme chemical and mechanical stressors. Its exceptional anti-electromagnetic interference capabilities guarantee unparalleled stability and reliability.
The ZY8000 is equipped with an advanced integrated diagnostic function, allowing real-time self-monitoring. Should any predefined events occur, the transmitter switches to fault alert mode, outputting a warning current (3.6mA or 22.8mA) and signaling system interlocks and SIS safety systems. In the event of a fault, the LCD display immediately shows an 'Err' message, pinpointing the faulty unit for easy maintenance, repair, and replacement, thus streamlining the entire process.
Product Detail Picture
Every detail of the product has been meticulously crafted
Intelligent Flange Remote Transmitter Sensing
The measured pressure is relayed through remote
transmission devices and then transmitted to the transmitter
through an oil-filled capillary system. It accurately measures liquid levels and differential pressure (D/P), even in high-temperature conditions (requiring the transmitter to be placed at a distance).
Ideal for high viscosity, easily precipitating crystalline, or corrosive mediums. Extensively utilized in petroleum, chemical industries, metallurgy, power generation, environmental protection, new energy sectors, and machinery equipment industries.
The measured pressure is relayed through remote
transmission devices and then transmitted to the transmitter
through an oil-filled capillary system. It accurately measures liquid levels and differential pressure (D/P), even in high-temperature conditions (requiring the transmitter to be placed at a distance).
Ideal for high viscosity, easily precipitating crystalline, or corrosive mediums. Extensively utilized in petroleum, chemical industries, metallurgy, power generation, environmental protection, new energy sectors, and machinery equipment industries.
Product Features
Adhering to the exceptional performance and stability of the ZY8000 intelligent high precision pressure/differential pressure transmitter.
Featuring an imported mono-crystalline silicon chip, advanced lightning protection circuit design, and isolated power supply, our transmitter significantly enhances stability and anti-interference capabilities.
Various material and remote device combinations, along with a specialized oil filling system, maximize transmitter accuracy and ensure comprehensive cleanliness. The product boasts excellent stability, achieving the highest normal temperature accuracy up to 0.075%. Its explosion-proof shell structure is suitable for all weather conditions and is compatible with the HART protocol.
Adhering to the exceptional performance and stability of the ZY8000 intelligent high precision pressure/differential pressure transmitter.
Featuring an imported mono-crystalline silicon chip, advanced lightning protection circuit design, and isolated power supply, our transmitter significantly enhances stability and anti-interference capabilities.
Various material and remote device combinations, along with a specialized oil filling system, maximize transmitter accuracy and ensure comprehensive cleanliness. The product boasts excellent stability, achieving the highest normal temperature accuracy up to 0.075%. Its explosion-proof shell structure is suitable for all weather conditions and is compatible with the HART protocol.
Measuring Range
| Range code | GP Gauge pressure (Kpa ) | ||
| Measuring range | Overload limit | Rated pressure(Max) | |
| 03 | -6~6 | 2000 | Flange rated pressure and the minimum value of the upper limit of the measuring range |
| 04 | -40~40 | 5000 | |
| 05 | -100~100 | 7000 | |
| 06 | -100~400 | 10000 | |
| 07 | -100~4000 | 10000 | |
| 08 | -100~10000 | 10000 | |
| Range code | DP Differential pressure (Kpa) | ||||
| Range | Measuring range | Unilateral overpressure | Bilateral static pressure | Rated pressure (Max) | |
| 03 | 6 | -6~6 | 2000 | 16000 | The lower value of remote flange rated pressure and bilateral static |
| 04 | 40 | -40~40 | 5000 | 25000 | |
| 05 | 100 | -100~100 | 7000 | 25000 | |
| 06 | 400 | -400~400 | 10000 | 25000 | |
| 07 | 4000 | -500~4000 | 10000 | 25000 | |
| 08 | 10000 | -500~10000 | 10000 | 25000 | |
Technical Parameter
Accuracy: 0.1%FS, 0.25%FS, 0.5%FS
Measured Parameters: Pressure/Differential Pressure
Output: 2-wire 4~20mA + HART
4-wire RS485 Output (MODBUS Protocol) PA Protocol
Power Supply: 24VDC (Normal Working Pressure 12 ~ 36V)
Long-Term Stability: ≤0.1%FS/Year
Max Range Down: 50:1
Max Working Pressure: Flange Rated Pressure and the Minimum Value of Bilateral Static Pressure
Ambient Pressure: -30~70ºC
Medium Temperature: -40~200ºC (Based on Filling Liquid)
Ex-Proof Grade: Flame Proof Exd II CT6 Gb
Intrinsic Safety Exia II CT6 Ga
Protection Grade: IP67
Housing Material: Aluminum, 316SS (Selectable)
Flange Material: 316L, HC (Customizable)
Diaphragm Material: 316L, HC, Ta, S32205, Ni, Ti, Monel, Inconel, 316L Gold Plating, and 316L Coating with PTFE etc.
Filling Liquid: Silicon Oil: -40~205ºC
High Temperature Silicon Oil: -10~300ºC
Fluorocarbon Oil: -50~150ºC
Electrical Interface: 2-M20×1.5(F) or 2-1/2NPT(F)
Process Connection: Refer to Remote Diaphragm Device Selection
Selection List
| Type | Code | Explanation | ||||
| ZY8000Y | ZY8000Y | Intelligent remote transmitter | ||||
| Remote system type | A | Pressure (T type)/single flange straight vertical installation | ||||
| B | Differential pressure/single flange straight vertical installation | |||||
| C | Differential pressure/single flange single flange straight side installation | |||||
| D | D/P/high pressure straight side installation, low pressure side remote sealing system | |||||
| E | Differential pressure /dual remote sealing system | |||||
| Measuring range | 03 | -6~6 | ||||
| 04 | -40~40 | |||||
| 05 | -100~100 | |||||
| 06 | -100~400 | |||||
| 07 | -100~4000 | |||||
| 08 | -100~10000 | |||||
| Communication protocol | H | HART protocol | ||||
| P | PROFIBUS-PA(3.02)Field bus | |||||
| F | Communication FF(6.1.1)Field bus communication | |||||
| Process connection | o | Splint with 1/4NPT taper piping internal thread | ||||
| 1 | Freedom flange 1/2NPT taper piping internal thread | |||||
| 2 | T type thread joint M20×1.5,with rear weldingФ14 impulse pipe ball and cone joint | |||||
| 3 | 1/4NPTtaper pipe external thread convert to M20×1.5 joint,with rear weldingФ14impulse pipe | |||||
| Isolation diaphragm | S | 316L | ||||
| C | HC-276 | |||||
| M | Monel | |||||
| T | Tantalum | |||||
| Sensor oil filling | 1 | Silicon oil(-50~205ºC) | ||||
| 2 | Fluorocarbon oil(-50~150ºC) | |||||
| Housing | Material | Electrical interface | ||||
| A | Aluminum | 1/2NPT internal thread,2 electrical joint | ||||
| B | Aluminum | M20×1.5 internal thread,2 electrical joint | ||||
| C | Stainless steel | 1/2NPT internal thread,2 electrical joint | ||||
| D | Stainless steel | M20×1.5 internal thread,2 electrical joint | ||||
| Display head | M0 | Without display head | ||||
| M5 | LCD display head | |||||
| Mounting bracket | Type | Material | ||||
| B0 | Without bracket | |||||
| B2 | B3 bracket | Q235 | ||||
| B3 | B3 bracket | 304 | ||||
| B4 | L Type bracket | 304 | ||||
| Ex-proof | 0 | Non-Explosion-proof | ||||
| d | PCEC: Flame-proof Ex dIIC T6 Gb | |||||
| i | CLEx:Intrinsic safety Ex iaIIC T6 Ga | |||||
| Flange type | FFW | Flush flange seal(2-in/DN50 3-in/DN80 4-in/DN100 RF) | ||||
| RFW | Split flange seal(1/2-in/DN15 1-in/DN25 1_1/2-in/DN40 RF) | |||||
| EFW | Extend insert flange seal | |||||
| FCW | Flush flange seal -RTJ washer surface(2-in/3-in) | |||||
| Flange standard | 1 | ANSI/ASME B16.5/HG20615 | ||||
| 2 | EN1092-1/GOST12815-80/HG20592 | |||||
| Flange dimension | HG20615 | HG20592 | ||||
| A | ¾-in | DN10 | ||||
| B | 1-in | DN25 | ||||
| C | 1½-in | DN40 | ||||
| D | 2-in | DN50 | ||||
| E | 3-in | DN80 | ||||
| F | 4-in | DN100 | ||||
| Flange pressure grade | HG20615 | HG20592 | ||||
| 2 | 150 psi | PN40 | ||||
| 4 | 300 psi | PN100 | ||||
| 6 | 600 psi | N/A | ||||
| Flange sealing type | RF | RF surface | ||||
| RJ | RJ Ring joint surface | |||||
| M | M Male surface | |||||
| FM | FM Female surface | |||||
| Remote filling liquid | Sealed liquid | Contact liquid temperature | ||||
| E | DC200 Silicon oil | -40ºC~205ºC | ||||
| G | DC704 High temperature silicon oil | -10ºC~300ºC | ||||
| I | Fluorocarbon oil | -50ºC~150ºC | ||||
| Capillary protection coating material | B | 304 Bellows | ||||
| C | 316 Bellows | |||||
| D | 304 Bellows + PVC Coating | |||||
| E | 316 Bellows +PVC Coating | |||||
| Capillary length | - | The first and second is the length of H side:00m-15m The third and fourth is the length of L side:00m-15m | ||||
| Flange material | A | CS | ||||
| B | 304 | |||||
| C | 316 | |||||
| D | 316L | |||||
| H side diaphragm insert cylinder length | - | H0=0mm(Flush flange selection) H1=50mm H2=100mm H3=150mm H4=200mm H5=250mm HX: customized dimension | ||||
| L side diaphragm insert cylinder length | - | L0=0mm(Flush flange selection) L1=50mm L2=100mm L3=150mm L4=200mm L5=250mm LX: customized dimension | ||||
| Flange isolation diaphragm material | S | 316L | ||||
| C | HC-276 | |||||
| M | Monel | |||||
| T | Tantalum | |||||
| V | 316 Gold plating | |||||
| P | 316L+PTFE | |||||
| Insert cylinder | 0 | Without insert cylinder | ||||
| 1 | 316L | |||||
| 2 | HC-276 | |||||
| 3 | Monel | |||||
| Additional option | / | Refer to additional selection list (as follow) | ||||
| Project | Code | Explanation | ||||
| Additional accreditation | P10 | SIL | ||||
| Flushing ring | Thread | Material | ||||
| G30X | 1/4 NPT+Plug | X:1 means 1 flush hole 2 means 2 flush hole | 304 | |||
| G31X | 1/4 NPT+ Plug | 316 | ||||
| G32X | 1/2 NPT+ Plug | 304 | ||||
| G33X | 1/2 NPT+ Plug | 316 | ||||
| Electrical joint | Specification and Dimension | Material | ||||
| G60 | M20×1.5 Electrical joint + one plug | PA | ||||
| G61 | 1/2NPT Electrical joint + one plug | PA | ||||
| G70 | M20×1.5 Ex-proof Electrical joint+1 plug | 304 | ||||
| G71 | 1/2NPT Ex-proof Electrical joint+1 plug | 304 | ||||
Measuring Range
| Range code | GP Gauge pressure (Kpa ) | ||
| Measuring range | Overload limit | Rated pressure(Max) | |
| 03 | -6~6 | 2000 | Flange rated pressure and the minimum value of the upper limit of the measuring range |
| 04 | -40~40 | 5000 | |
| 05 | -100~100 | 7000 | |
| 06 | -100~400 | 10000 | |
| 07 | -100~4000 | 10000 | |
| 08 | -100~10000 | 10000 | |
| Range code | DP Differential pressure (Kpa) | ||||
| Range | Measuring range | Unilateral overpressure | Bilateral static pressure | Rated pressure (Max) | |
| 03 | 6 | -6~6 | 2000 | 16000 | The lower value of remote flange rated pressure and bilateral static |
| 04 | 40 | -40~40 | 5000 | 25000 | |
| 05 | 100 | -100~100 | 7000 | 25000 | |
| 06 | 400 | -400~400 | 10000 | 25000 | |
| 07 | 4000 | -500~4000 | 10000 | 25000 | |
| 08 | 10000 | -500~10000 | 10000 | 25000 | |
Selection List
| Type | Code | Explanation | ||||
| ZY8000Y | ZY8000Y | Intelligent remote transmitter | ||||
| Remote system type | A | Pressure (T type)/single flange straight vertical installation | ||||
| B | Differential pressure/single flange straight vertical installation | |||||
| C | Differential pressure/single flange single flange straight side installation | |||||
| D | D/P/high pressure straight side installation, low pressure side remote sealing system | |||||
| E | Differential pressure /dual remote sealing system | |||||
| Measuring range | 03 | -6~6 | ||||
| 04 | -40~40 | |||||
| 05 | -100~100 | |||||
| 06 | -100~400 | |||||
| 07 | -100~4000 | |||||
| 08 | -100~10000 | |||||
| Communication protocol | H | HART protocol | ||||
| P | PROFIBUS-PA(3.02)Field bus | |||||
| F | Communication FF(6.1.1)Field bus communication | |||||
| Process connection | o | Splint with 1/4NPT taper piping internal thread | ||||
| 1 | Freedom flange 1/2NPT taper piping internal thread | |||||
| 2 | T type thread joint M20×1.5,with rear weldingФ14 impulse pipe ball and cone joint | |||||
| 3 | 1/4NPTtaper pipe external thread convert to M20×1.5 joint,with rear weldingФ14impulse pipe | |||||
| Isolation diaphragm | S | 316L | ||||
| C | HC-276 | |||||
| M | Monel | |||||
| T | Tantalum | |||||
| Sensor oil filling | 1 | Silicon oil(-50~205ºC) | ||||
| 2 | Fluorocarbon oil(-50~150ºC) | |||||
| Housing | Material | Electrical interface | ||||
| A | Aluminum | 1/2NPT internal thread,2 electrical joint | ||||
| B | Aluminum | M20×1.5 internal thread,2 electrical joint | ||||
| C | Stainless steel | 1/2NPT internal thread,2 electrical joint | ||||
| D | Stainless steel | M20×1.5 internal thread,2 electrical joint | ||||
| Display head | M0 | Without display head | ||||
| M5 | LCD display head | |||||
| Mounting bracket | Type | Material | ||||
| B0 | Without bracket | |||||
| B2 | B3 bracket | Q235 | ||||
| B3 | B3 bracket | 304 | ||||
| B4 | L Type bracket | 304 | ||||
| Ex-proof | 0 | Non-Explosion-proof | ||||
| d | PCEC: Flame-proof Ex dIIC T6 Gb | |||||
| i | CLEx:Intrinsic safety Ex iaIIC T6 Ga | |||||
| Flange type | FFW | Flush flange seal(2-in/DN50 3-in/DN80 4-in/DN100 RF) | ||||
| RFW | Split flange seal(1/2-in/DN15 1-in/DN25 1_1/2-in/DN40 RF) | |||||
| EFW | Extend insert flange seal | |||||
| FCW | Flush flange seal -RTJ washer surface(2-in/3-in) | |||||
| Flange standard | 1 | ANSI/ASME B16.5/HG20615 | ||||
| 2 | EN1092-1/GOST12815-80/HG20592 | |||||
| Flange dimension | HG20615 | HG20592 | ||||
| A | ¾-in | DN10 | ||||
| B | 1-in | DN25 | ||||
| C | 1½-in | DN40 | ||||
| D | 2-in | DN50 | ||||
| E | 3-in | DN80 | ||||
| F | 4-in | DN100 | ||||
| Flange pressure grade | HG20615 | HG20592 | ||||
| 2 | 150 psi | PN40 | ||||
| 4 | 300 psi | PN100 | ||||
| 6 | 600 psi | N/A | ||||
| Flange sealing type | RF | RF surface | ||||
| RJ | RJ Ring joint surface | |||||
| M | M Male surface | |||||
| FM | FM Female surface | |||||
| Remote filling liquid | Sealed liquid | Contact liquid temperature | ||||
| E | DC200 Silicon oil | -40ºC~205ºC | ||||
| G | DC704 High temperature silicon oil | -10ºC~300ºC | ||||
| I | Fluorocarbon oil | -50ºC~150ºC | ||||
| Capillary protection coating material | B | 304 Bellows | ||||
| C | 316 Bellows | |||||
| D | 304 Bellows + PVC Coating | |||||
| E | 316 Bellows +PVC Coating | |||||
| Capillary length | - | The first and second is the length of H side:00m-15m The third and fourth is the length of L side:00m-15m | ||||
| Flange material | A | CS | ||||
| B | 304 | |||||
| C | 316 | |||||
| D | 316L | |||||
| H side diaphragm insert cylinder length | - | H0=0mm(Flush flange selection) H1=50mm H2=100mm H3=150mm H4=200mm H5=250mm HX: customized dimension | ||||
| L side diaphragm insert cylinder length | - | L0=0mm(Flush flange selection) L1=50mm L2=100mm L3=150mm L4=200mm L5=250mm LX: customized dimension | ||||
| Flange isolation diaphragm material | S | 316L | ||||
| C | HC-276 | |||||
| M | Monel | |||||
| T | Tantalum | |||||
| V | 316 Gold plating | |||||
| P | 316L+PTFE | |||||
| Insert cylinder | 0 | Without insert cylinder | ||||
| 1 | 316L | |||||
| 2 | HC-276 | |||||
| 3 | Monel | |||||
| Additional option | / | Refer to additional selection list (as follow) | ||||
| Project | Code | Explanation | ||||
| Additional accreditation | P10 | SIL | ||||
| Flushing ring | Thread | Material | ||||
| G30X | 1/4 NPT+Plug | X:1 means 1 flush hole 2 means 2 flush hole | 304 | |||
| G31X | 1/4 NPT+ Plug | 316 | ||||
| G32X | 1/2 NPT+ Plug | 304 | ||||
| G33X | 1/2 NPT+ Plug | 316 | ||||
| Electrical joint | Specification and Dimension | Material | ||||
| G60 | M20×1.5 Electrical joint + one plug | PA | ||||
| G61 | 1/2NPT Electrical joint + one plug | PA | ||||
| G70 | M20×1.5 Ex-proof Electrical joint+1 plug | 304 | ||||
| G71 | 1/2NPT Ex-proof Electrical joint+1 plug | 304 | ||||
Shandong Zhongziyi Intelligent Technology Co., Ltd. seamlessly integrates the world's cutting-edge design philosophies and state-of-the-art process technologies. It is a testament to engineering excellence.
We adopt the world's finest mono-crystalline silicon sensors and incorporate highly reliable electronic module designs. Coupled with precision temperature and linear correction systems,
and intelligent manufacturing technologies, this ensures unparalleled high precision, stability, and product consistency.
at every stage of production.
We adopt the world's finest mono-crystalline silicon sensors and incorporate highly reliable electronic module designs. Coupled with precision temperature and linear correction systems,
and intelligent manufacturing technologies, this ensures unparalleled high precision, stability, and product consistency.
at every stage of production.
Our product boasts comprehensive intelligent diagnostics, simulation capabilities, monitoring, local configuration, and diverse communication functionalities. It's fully equipped with high-spec electromagnetic compatibility and lightning protection features. Widely utilized across sectors such as electric power, metallurgy, chemical industry, coal chemistry, petroleum, petrochemicals,environmental protection, food processing, pharmaceuticals, building materials, light industries, and even the nuclear industry, our product stands out in a multitude of applications.
The diagnostic function can also be activated via HART, FF, PA, and other communication protocols. Alarms are clearly indicated as warnings or fault protection currents. Our automatic diagnostics cover SENSOR, ROM, RAM, EEPROM, and software operational statuses. Should the electronic unit or measuring element fail, the faulty components can be swiftly replaced on-site without the need for recalibration.
Shandong Zhongziyi Intelligent Technology Co., Ltd.Located in the prestigious Zibo Science and Technology Industrial Park, our company spans over an impressive 18,000.00 square meters. We boast a high-standard, modern manufacturing facility dedicated to excellence.committed tothe R&D,manufacture,sales, and service of pressure and temperature instruments.
As the standing director unit of the National Pressure Gauge Industry Association, we have achieved ISO9001 quality management system certification and are recognized as a high-tech enterprise in Shandong Province.
We are a close and strategic partner of Rosemount in China, closely aligning our technology advancements with theirs.
Our factory has been deeply engaged in instrument R&D and production for nearly 60 years, resulting in substantial technological accumulation and customer service expertise. Our products are widely used in industries such as Petroleum, Chemical, Papermaking,Metallurgy,Medicine,Food,Power, and Machinery. Our sales network covers the entire country and extends abroad, earning deep trust and favorable comments from a wide range of users.
Our core company goal is 'quality first, customer first.'
We warmly welcome customers to visit our factory and discuss potential cooperation.
Our Company and Factory
As the standing director unit of the National Pressure Gauge Industry Association, we have achieved ISO9001 quality management system certification and are recognized as a high-tech enterprise in Shandong Province.
We are a close and strategic partner of Rosemount in China, closely aligning our technology advancements with theirs.
Our factory has been deeply engaged in instrument R&D and production for nearly 60 years, resulting in substantial technological accumulation and customer service expertise. Our products are widely used in industries such as Petroleum, Chemical, Papermaking,Metallurgy,Medicine,Food,Power, and Machinery. Our sales network covers the entire country and extends abroad, earning deep trust and favorable comments from a wide range of users.
Our core company goal is 'quality first, customer first.'
We warmly welcome customers to visit our factory and discuss potential cooperation.
Our Company and Factory
Packaging & Shipping
We ensure timely delivery of your orders, as required by you.
We ensure timely delivery of your orders, as required by you.
We trust that the best team always wins!
Exhibition Pictures
We are actively seeking international cooperation through global exhibitions.
We are actively seeking international cooperation through global exhibitions.
FAQ
1. What kind of product do you supply?
O
ur product
range includes
pressure transmitters, temperature transmitters, level transmitters, pressure gauges, temperature gauges, and flow
meters.
2. What are your product and technology advantages?
Our factory was established in 1966, boasting nearly 60 years of manufacturing and R&D excellence. We are also a close partner of Rosemount in
China.
Our technology meticulously
aligns with Rosemount. Especially, our remote pressure transmitter technology and stability are considered the best in China.
3. Where is your factory located?
O
ur factory is located in Zibo, Shandong province, China, one of the top
three
instrument production areas.
A
nd it spans over 18,000 square meters.
4. Can we visit your factory?
Y
ou are always welcome to visit our factory at any time convenient for you.
5. What is the warranty on your product?
O
ur product comes with a 12-month warranty from the shipping date, and we provide
lifetime
maintenance.
6. What are your payment terms?
Currently
, we accept 50% down payment and 50% balance payable 5 days before delivery via T/T, Western Union,
PayPal
and Trade Assurance online payment.
7. What certifications do you have?
W
e hold ISO9001, CCC, CNAS laboratory accreditation, Flame-proof certification, Intrinsic Safety certification, SIL certificate, ECM certificate, Russia EAC and PAC certifications
a
nd
several
invention patents.
8. How long is your delivery time?
F
or peak seasons, it is 4 weeks, and 2 weeks for the off-season. Regardless of the season, we strive to meet your requirements.
9. How is your after-sales service?
Our products enjoy an excellent reputation for quality and have minimal warranty claims due to product defects. Nonetheless, we provide 24/7 online
support for our customers for any installation, commissioning, operational, or other issues.
10. How can I send a quotation?
Y
ou can send your quotation through our email or cellphone as listed below:
1. What kind of product do you supply?
O
ur product
range includes
pressure transmitters, temperature transmitters, level transmitters, pressure gauges, temperature gauges, and flow
meters.
2. What are your product and technology advantages?
Our factory was established in 1966, boasting nearly 60 years of manufacturing and R&D excellence. We are also a close partner of Rosemount in
China.
Our technology meticulously
aligns with Rosemount. Especially, our remote pressure transmitter technology and stability are considered the best in China.
3. Where is your factory located?
O
ur factory is located in Zibo, Shandong province, China, one of the top
three
instrument production areas.
A
nd it spans over 18,000 square meters.
4. Can we visit your factory?
Y
ou are always welcome to visit our factory at any time convenient for you.
5. What is the warranty on your product?
O
ur product comes with a 12-month warranty from the shipping date, and we provide
lifetime
maintenance.
6. What are your payment terms?
Currently
, we accept 50% down payment and 50% balance payable 5 days before delivery via T/T, Western Union,
PayPal
and Trade Assurance online payment.
7. What certifications do you have?
W
e hold ISO9001, CCC, CNAS laboratory accreditation, Flame-proof certification, Intrinsic Safety certification, SIL certificate, ECM certificate, Russia EAC and PAC certifications
a
nd
several
invention patents.
8. How long is your delivery time?
F
or peak seasons, it is 4 weeks, and 2 weeks for the off-season. Regardless of the season, we strive to meet your requirements.
9. How is your after-sales service?
Our products enjoy an excellent reputation for quality and have minimal warranty claims due to product defects. Nonetheless, we provide 24/7 online
support for our customers for any installation, commissioning, operational, or other issues.
10. How can I send a quotation?
Y
ou can send your quotation through our email or cellphone as listed below:
