Model NO.:

ZY8000Y

Type:

Remote Pressure Transmitter

Structure Type:

Diffused Silicon Pressure Transmitter

Measuring Medium:

Gas, Steam, Liquid

Accuracy Grade:

0.1%F.S, 0.25%F.S, 0.5%F.S

Pressure range:

0-10MPa

IP Rating:

IP67

Certification:

C.C.C, I.S.O 9001, E.C.M, E.a.C, P.a.C,S.I.L,

Customized:

Customized

Weight:

2kg

Capacity:

>50, 000.00 Sets

Output:

4-20 Ma, Mod Bus, PA

Ambient Temperature:

-30~70 Celsius Degree

Long Term Stability:

<=0.03%F.S/Year

Electrical Interface:

2-M 20*1.5, 2-1/2 N.P.T

Process Interface:

1/4 N.P.T

Response Time:

<=90ms

Range Down:

50:1

Diaphragm Material:

316 L, H C, Tantalum, 316 L Gold Plating

Mounting:

Direct Mounting, Flange or Rack

Power Supply:

24 V D.C

Medium Temperature:

-40~200 Celsius Degree

Explosion Proof:

Exd II CT6 GB, Exia II CT6 Ga

Trademark:

CAMCT

Transport Package:

Carton, Plywood Case

Specification:

20CM*10CM*30CM

Origin:

China

Product Description

ZY8000Y Intelligent remote transmitter

Intelligent flange remote transmitter sensing the measured pressure through remote transmission devices, then transmit to transmitter through oil-filled capillary. Can measure liquid level and D/P, applicable for high temperature(need transmitter away), high viscosity, easy to precipitate crystalline or corrosive medium. Widely using in petroleum, Chemical industry, Metallurgy, Power, Environment protection, new energy, Machinery equipment industries etc.

ZY8000 the basic accuracy intelligent transmitter is 0.1% FS(highest0.075%FS). After ten years continuous running, it can still maintain 99.9% accuracy, considerable cost saving in maintenance. It adopts strong metal housing and fully sealed measuring elements, can cope with extremely chemical & mechanical loads easily. Meanwhile, it has very strong performance of anti-electromagnetic interference, ensure the high stability & high reliability of ZY8000.

ZY8000 have integrated diagnostic function and can realtime monitor the status of itself. The transmitter will enter fault alert mode, output alert electric current (3.6mA or 22.8mA) and provide control signal for system interlock and SIS safety system after over defined quantity events. When a fault occurs, the LCD display automatically displays Err, automatically analyzes and displays the faulty unit, making the maintenance, repair, and replacement of the instrument more simple and convenient.

Product Detail Picture

Every detail of the product has been cafefully crafted

Intelligent flange remote transmitter sensing the measured pressure through remote transmission devices, then transmit to transmitter through oil-filled capillary. Can measure liquid level and D/P, applicable for high temperature(need transmitter away), high viscosity, easy to precipitate crystalline or corrosive medium. Widely using in petroleum, Chemical industry, Metallurgy, Power, Environment protection, new energy, Machinery equipment industries etc.

Product features

Adhering to the ZY8000 intelligent high precision pressure/differential pressure transmitter good performance and stability, Imported mono-crystalline silicon chip, lightening protection circuit design, isolated power supply and senor signal greatly improved the stability and anti-interference capability
Different material and different type of remote device combined with special oil filling device maximize the accuracy of transmitter and meet overall clearness needs. Good product stability, highest accuracy on normal temperature up to 0.075%. Explosion proof shell structure can be use in all weather and compatible with HART protocol.

Measuring range

Range code	GP Gauge pressure (Kpa )
Range code	Measuring range	Overload limit	Rated pressure(Max)
03	-6~6	2000	Flange rated pressure and the minimum value of the upper limit of the measuring range
04	-40~40	5000
05	-100~100	7000
06	-100~400	10000
07	-100~4000	10000
08	-100~10000	10000

Range code	DP Differential pressure (Kpa)
Range code	Range	Measuring range	Unilateral overpressure	Bilateral static pressure	Rated pressure (Max)
03	6	-6~6	2000	16000	The lower value of remote flange rated pressure and bilateral static
04	40	-40~40	5000	25000
05	100	-100~100	7000	25000
06	400	-400~400	10000	25000
07	4000	-500~4000	10000	25000
08	10000	-500~10000	10000	25000

Technical parameter

Accuracy: 0.1%FS,0.25%FS,0.5%FS
Measured parameters: Pressure/Differential pressure
Output:2 wire 4~20mA+HART
4 wire RS485 output (MODBUS protocol) PA protocol
Power supply:24VDC (normal working pressure 12 ~36V)
Long term stability:≤0.1%FS/Year
Max range down:50:1
Max working pressure:Flange rated pressure and the minimum value of bilateral static pressure
Ambient pressure:-30~70ºC
Medium temperature: -40~200ºC (applicable temperature based on filling liquid)
Ex-proof grade:Flame proof Exd II CT6 Gb
Intrinsic safety Exia II CT6 Ga
Protection grade:IP67
Housing material:Aluminum, 316SS (selectable)
Flange material:316L, HC (could be customized)
Diaphragm material:316L, HC, Ta, S32205, Ni, Ti, Monel, Inconel, 316L gold plating,and 316L coating with PTFE etc.
Filing liquid:Silicon oil:-40~205ºC
High temperature silicon oil:-10~300ºC
Fluorocarbon oil:-50~150ºC
Electrical interface: 2-M20×1.5(F)or 2-1/2NPT(F)
Process connection: refer to remote diaphragm device selection

Selection list

Type	Code		Explanation
ZY8000Y	ZY8000Y		Intelligent remote transmitter
Remote system type	A		Pressure (T type)/single flange straight vertical installation
	B		Differential pressure/single flange straight vertical installation
	C		Differential pressure/single flange single flange straight side installation
	D		D/P/high pressure straight side installation, low pressure side remote sealing system
	E		Differential pressure /dual remote sealing system
Measuring range	03		-6~6
	04		-40~40
	05		-100~100
	06		-100~400
	07		-100~4000
	08		-100~10000
Communication protocol	H		HART protocol
	P		PROFIBUS-PA(3.02)Field bus
	F		Communication FF(6.1.1)Field bus communication
Process connection	o		Splint with 1/4NPT taper piping internal thread
	1		Freedom flange 1/2NPT taper piping internal thread
	2		T type thread joint M20×1.5,with rear weldingФ14 impulse pipe ball and cone joint
	3		1/4NPTtaper pipe external thread convert to M20×1.5 joint,with rear weldingФ14impulse pipe
Isolation diaphragm	S		316L
	C		HC-276
	M		Monel
	T		Tantalum
Sensor oil filling	1		Silicon oil(-50~205ºC)
	2		Fluorocarbon oil(-50~150ºC)
Housing			Material	Electrical interface
	A		Aluminum	1/2NPT internal thread,2 electrical joint
	B		Aluminum	M20×1.5 internal thread,2 electrical joint
	C		Stainless steel	1/2NPT internal thread,2 electrical joint
	D		Stainless steel	M20×1.5 internal thread,2 electrical joint
Display head	M0		Without display head
	M5		LCD display head
Mounting bracket			Type			Material
	B0		Without bracket
	B2		B3 bracket			Q235
	B3		B3 bracket			304
	B4		L Type bracket			304
Ex-proof	0		Non-Explosion-proof
	d		PCEC: Flame-proof Ex dIIC T6 Gb
	i		CLEx:Intrinsic safety Ex iaIIC T6 Ga
Flange type	FFW		Flush flange seal(2-in/DN50 3-in/DN80 4-in/DN100 RF)
	RFW		Split flange seal(1/2-in/DN15 1-in/DN25 1_1/2-in/DN40 RF)
	EFW		Extend insert flange seal
	FCW		Flush flange seal -RTJ washer surface(2-in/3-in)
Flange standard	1		ANSI/ASME B16.5/HG20615
	2		EN1092-1/GOST12815-80/HG20592
Flange dimension			HG20615		HG20592
	A		¾-in		DN10
	B		1-in		DN25
	C		1½-in		DN40
	D		2-in		DN50
	E		3-in		DN80
	F		4-in		DN100
Flange pressure grade			HG20615		HG20592
	2		150 psi		PN40
	4		300 psi		PN100
	6		600 psi		N/A
Flange sealing type	RF		RF surface
	RJ		RJ Ring joint surface
	M		M Male surface
	FM		FM Female surface
Remote filling liquid			Sealed liquid		Contact liquid temperature
	E		DC200 Silicon oil		-40ºC~205ºC
	G		DC704 High temperature silicon oil		-10ºC~300ºC
	I		Fluorocarbon oil		-50ºC~150ºC
Capillary protection coating material	B		304 Bellows
	C		316 Bellows
	D		304 Bellows + PVC Coating
	E		316 Bellows +PVC Coating
Capillary length	-		The first and second is the length of H side:00m-15m The third and fourth is the length of L side:00m-15m
Flange material	A		CS
	B		304
	C		316
	D		316L
H side diaphragm insert cylinder length	-		H0=0mm(Flush flange selection) H1=50mm H2=100mm H3=150mm H4=200mm H5=250mm HX: customized dimension
L side diaphragm insert cylinder length	-		L0=0mm(Flush flange selection) L1=50mm L2=100mm L3=150mm L4=200mm L5=250mm LX: customized dimension
Flange isolation diaphragm material	S		316L
	C		HC-276
	M		Monel
	T		Tantalum
	V		316 Gold plating
	P		316L+PTFE
Insert cylinder	0		Without insert cylinder
	1		316L
	2		HC-276
	3		Monel
Additional option	/		Refer to additional selection list (as follow)
Project	Code		Explanation
Additional accreditation	P10		SIL
Flushing ring			Thread			Material
	G30X		1/4 NPT+Plug	X:1 means 1 flush hole 2 means 2 flush hole		304
	G31X		1/4 NPT+ Plug			316
	G32X		1/2 NPT+ Plug			304
	G33X		1/2 NPT+ Plug			316
Electrical joint		Specification and Dimension				Material
	G60	M20×1.5 Electrical joint + one plug				PA
	G61	1/2NPT Electrical joint + one plug				PA
	G70	M20×1.5 Ex-proof Electrical joint+1 plug				304
	G71	1/2NPT Ex-proof Electrical joint+1 plug				304

Measuring range

Range code	GP Gauge pressure (Kpa )
Range code	Measuring range	Overload limit	Rated pressure(Max)
03	-6~6	2000	Flange rated pressure and the minimum value of the upper limit of the measuring range
04	-40~40	5000
05	-100~100	7000
06	-100~400	10000
07	-100~4000	10000
08	-100~10000	10000

Range code	DP Differential pressure (Kpa)
Range code	Range	Measuring range	Unilateral overpressure	Bilateral static pressure	Rated pressure (Max)
03	6	-6~6	2000	16000	The lower value of remote flange rated pressure and bilateral static
04	40	-40~40	5000	25000
05	100	-100~100	7000	25000
06	400	-400~400	10000	25000
07	4000	-500~4000	10000	25000
08	10000	-500~10000	10000	25000

Selection list

Type	Code		Explanation
ZY8000Y	ZY8000Y		Intelligent remote transmitter
Remote system type	A		Pressure (T type)/single flange straight vertical installation
	B		Differential pressure/single flange straight vertical installation
	C		Differential pressure/single flange single flange straight side installation
	D		D/P/high pressure straight side installation, low pressure side remote sealing system
	E		Differential pressure /dual remote sealing system
Measuring range	03		-6~6
	04		-40~40
	05		-100~100
	06		-100~400
	07		-100~4000
	08		-100~10000
Communication protocol	H		HART protocol
	P		PROFIBUS-PA(3.02)Field bus
	F		Communication FF(6.1.1)Field bus communication
Process connection	o		Splint with 1/4NPT taper piping internal thread
	1		Freedom flange 1/2NPT taper piping internal thread
	2		T type thread joint M20×1.5,with rear weldingФ14 impulse pipe ball and cone joint
	3		1/4NPTtaper pipe external thread convert to M20×1.5 joint,with rear weldingФ14impulse pipe
Isolation diaphragm	S		316L
	C		HC-276
	M		Monel
	T		Tantalum
Sensor oil filling	1		Silicon oil(-50~205ºC)
	2		Fluorocarbon oil(-50~150ºC)
Housing			Material	Electrical interface
	A		Aluminum	1/2NPT internal thread,2 electrical joint
	B		Aluminum	M20×1.5 internal thread,2 electrical joint
	C		Stainless steel	1/2NPT internal thread,2 electrical joint
	D		Stainless steel	M20×1.5 internal thread,2 electrical joint
Display head	M0		Without display head
	M5		LCD display head
Mounting bracket			Type			Material
	B0		Without bracket
	B2		B3 bracket			Q235
	B3		B3 bracket			304
	B4		L Type bracket			304
Ex-proof	0		Non-Explosion-proof
	d		PCEC: Flame-proof Ex dIIC T6 Gb
	i		CLEx:Intrinsic safety Ex iaIIC T6 Ga
Flange type	FFW		Flush flange seal(2-in/DN50 3-in/DN80 4-in/DN100 RF)
	RFW		Split flange seal(1/2-in/DN15 1-in/DN25 1_1/2-in/DN40 RF)
	EFW		Extend insert flange seal
	FCW		Flush flange seal -RTJ washer surface(2-in/3-in)
Flange standard	1		ANSI/ASME B16.5/HG20615
	2		EN1092-1/GOST12815-80/HG20592
Flange dimension			HG20615		HG20592
	A		¾-in		DN10
	B		1-in		DN25
	C		1½-in		DN40
	D		2-in		DN50
	E		3-in		DN80
	F		4-in		DN100
Flange pressure grade			HG20615		HG20592
	2		150 psi		PN40
	4		300 psi		PN100
	6		600 psi		N/A
Flange sealing type	RF		RF surface
	RJ		RJ Ring joint surface
	M		M Male surface
	FM		FM Female surface
Remote filling liquid			Sealed liquid		Contact liquid temperature
	E		DC200 Silicon oil		-40ºC~205ºC
	G		DC704 High temperature silicon oil		-10ºC~300ºC
	I		Fluorocarbon oil		-50ºC~150ºC
Capillary protection coating material	B		304 Bellows
	C		316 Bellows
	D		304 Bellows + PVC Coating
	E		316 Bellows +PVC Coating
Capillary length	-		The first and second is the length of H side:00m-15m The third and fourth is the length of L side:00m-15m
Flange material	A		CS
	B		304
	C		316
	D		316L
H side diaphragm insert cylinder length	-		H0=0mm(Flush flange selection) H1=50mm H2=100mm H3=150mm H4=200mm H5=250mm HX: customized dimension
L side diaphragm insert cylinder length	-		L0=0mm(Flush flange selection) L1=50mm L2=100mm L3=150mm L4=200mm L5=250mm LX: customized dimension
Flange isolation diaphragm material	S		316L
	C		HC-276
	M		Monel
	T		Tantalum
	V		316 Gold plating
	P		316L+PTFE
Insert cylinder	0		Without insert cylinder
	1		316L
	2		HC-276
	3		Monel
Additional option	/		Refer to additional selection list (as follow)
Project	Code		Explanation
Additional accreditation	P10		SIL
Flushing ring			Thread			Material
	G30X		1/4 NPT+Plug	X:1 means 1 flush hole 2 means 2 flush hole		304
	G31X		1/4 NPT+ Plug			316
	G32X		1/2 NPT+ Plug			304
	G33X		1/2 NPT+ Plug			316
Electrical joint		Specification and Dimension				Material
	G60	M20×1.5 Electrical joint + one plug				PA
	G61	1/2NPT Electrical joint + one plug				PA
	G70	M20×1.5 Ex-proof Electrical joint+1 plug				304
	G71	1/2NPT Ex-proof Electrical joint+1 plug				304

Shandong Zhongziyi Intelligent Technology Co.,Ltd, integrated the world's advanced design philosophy & process technology. It's adopt the world's advanced mono-crystalline silicon senor,high reliability electronic module design,precision temperature and linear correction system together with intelligent manufacturing technology,to ensure the high precision, high stability and consistency of the product.

The product has complete intelligent diagnosis, simulation, monitoring, local configuration and a variety of communication functions, complete specifications of the liquid material, high standards of electromagnetic compatibility and lightning protection characteristics.It's widely using in electricpower, metallurgy, chemicalindustry, coal chemical industry, petroleum, petrochemical, environmental protection, food processing, medicine, building materials, light industry, nuclear industry and other industries.

The diagnostic function can also be started through HART, FF, PA and other communication protocol, and the alarm can be expressed in the form of warning or fault protection current. Automatic diagnosis the running status of SENSOR, ROM, RAM, EEPROM, software. When the electronic unit or measuring element is damaged, the faulty part can be replaced directly on site without the need for readjust.

Shandong zhongziyi intelligent technology Co., Ltd located in Zibo science and technology industrial park. It takes an area of more than 18,000.00 square meters. we have high standard and modern manufacturing factory and committed to the R&D, manufacture, sales and service of pressure and temperature instrument.
We are the standing director unit of national pressure gauge Industry Association and we have obtained ISO9001 quality management system certification and we are the high-tech enterprise in Shandong Province. we are the supper close partner of Rosemount in China. Our technology closely keep following with Rosemount.
Our factory deeply engaged in instrument R&D and production for almost 60 years, and we have a very good technology accumulation and customer service experiments. The products widely using in Petroleum, Chemical industry, Papermaking, Metallurgy, Medicine, Food, Power and machinery etc. The sales cover the whole country and abroad and won trust and favorable comment from the masses of users deeply.

The company's core goal is "quality first, customer first".

We give hearty welcome to the customers come to our factory to visit and discuss cooperation business.

Our company and Factory

Packaging & Shipping

we will delivery your order product at the earlist date as your required

we trust the best team win!

Exhibition pictures

we are actively seeking abroad cooperation through abroad exhibition.

FAQ

1, What kind of product do you supply?

Our product includes pressure transmitter, temperature transmitter, level transmitter, pressure gauge, temperature gauge and flow meter.

2,What is your product and technology advantages?

Our factory was built on 1966 with almost 60 years manufacturing and R&D experience. We are also the supper close partner of Rosemount in China. our technology closely keeps following Rosemount. Especially, our remote pressure transmitter technology and stability could be No. one in China.

3, Where is your factory location?

Our factory located in Zibo, Shandong province, China, which is top three instrument production area. And take an area of more than 18000 square meters.

4, Can we visit your factory?

You are always welcome to our factory at any time at your convenience.

5, What is the warranty of your product?

Our product warranty is 12 months from the shipping date, but we provide lifetime maintenance.

6, What are your payment terms?

Now, we can accept 50% down payment and 50% balance payable 5 days before delivery by T/T, west union, PayPal and trade assurance online payment.

7, What kind of certification do you have?

We have ISO9001, CCC, CNAS laboratory accreditation certification, Flame-proof certification and intrinsic safety certification, SIL certificate. ECM certificate, Russia EAC and PAC certificate and several invention patents.

8, How long is your delivery date?

For peak season is 4 weeks and 2 weeks for offseason, but no matter peak or off season we will try our best to meet your requirements.

9, How is your after sales servives?

Our products quality enjoy very goood quality reputation and has almost no warranty caused by product itself, but we still provide 24/7 online
services for our customer for any installation, commision, running or other problems.

10, How can I send quotation?

You can send quotation through our email or cellphone as below:

Message Type
* Message Content
* Name
* Phone
* Email
* CAPTCHA

High Precision Oil Filling Capillary Remote Pressure Transmitter with Anti-Interference

Shandong Zhongziyi Intelligent Technology Co., Ltd.