Audited Supplier
67*1.6*2/3
ISO9001:2008
Alternate Tooth
67mm
Cutting
Band Saw Blade
Uncoated
Carbide Saw Blade
High Temperature Alloy/Titanium Alloy/Nickel Bas
100% Inspection Before Delivery
Long Lifetime, High Precision, High Efficiency
7 Days
Hante
Pallets/Cartons/Wooden Cases
27mm/34mm/41mm/54mm/67mm/80mm
Made in China
8202201000
Product Description
| High quality Carbide Tipped band saw blades list | ||
| Specifications | Teeth Form | |
| 27mmx0.9 | 1x.035 | 3/4 2/3 |
| 34mmx1.1 | 1-1/4x.042 | 3/4 2/3 |
| 41mmx1.3 | 1-1/2x.050 | 3/4 2/3 1.7/2.5 1.4/2 1/1.5 0.75/1 0.75/1.25 |
| 54mmx1.6 | 2x.063 | 3/4 2/3 1.7/2.5 1.4/2 1/1.5 0.75/1 0.75/1.25 |
| 67mmx1.6 | 2-5/8x.063 | 2/3 1.7/2.5 1.4/2 1/1.5 0.75/1 0.75/1.25 |
| 80mmx1.6 | 3x.063 | 2/3 1.7/2.5 1.4/2 1/1.5 0.75/1 0.75/1.25 |
2,It is difficult to cut the metal materials, such as titanium alloy, stainless steel, hardened steel, raw material
paste, nickel base alloy, cast steel, etc., can be cut freely;
3,Unique tooth shape design, with excellent chip removal performance;
4,Saw back refining technology, improve the fatigue strength of band saw.
Chemical composition of cemented carbide:
| (C) | (Si) | (Mn) | (P) | (S) | (Cr) | (Mo) | (V) | (W) | (Co) | |
| cemented carbide | Co:10% Residual refractory metal carbides:Wc,Tic,Nbc,Tac,Vc | |||||||||
| HGS40 | 0.40 | 0.30 | 0.45 | 0.015 | 0.005 | 3.00 | 1.50 | 0.25 | ||
Cutting fault analysis :
| project | cutting elements | band broking | sawing deviation | sawtooth crack | surface rough | sawtooth wear too fast | cutting vibration |
| Adjusting the sawing machine | two guide rods should be located close to the workpiece guide block is wearing parts, must be regularly checked and timely replaced. | The broken belt guide block is worn or the adjustment distance is too large | The broken belt guide block is worn or the guide rod is loosening or shaking | the cutting vibration guide block is not well adjusted | |||
| Adjust the driven pulley to achieve the smooth operation of saw blade without dropping, stringing and biting the stop of the pulley. | the belt wheel is badly worn | ||||||
| The iron brush used to remove sawdust is a vulnerable part. It should be checked and replaced in time. | The iron brush is damaged, and the saw belt groove is blocked by cutting debris | The iron brush is damaged and cannot work properly | |||||
| Adjust the driven pulley to have proper tension. For the saw belt used for a long time, the tension should be compensated and correctly matched with the concentration of cutting fluid (coolant). | saw belt tension too high | saw belt tension too low | saw saw belt tension too low | ||||
| Correctly mix the cutting fluid (coolant) concentration | too low cutting fluid (coolant) or too low coolant concentration | ||||||
| cutting parameters | Correct selection of saw band linear speed | saw band linear speed too low | saw band linear speed too low | saw band linear speed too low | carefully adjusted saw band linear speed | ||
| correctly Choose saw feed line rate | saw band feed ratetoo large | saw band feed ratetoo large | saw band feed ratetoo large | saw band feed ratetoo large | saw band feed rate too large or too small | saw band feed rate too large or too small | |
| Band saw blade selection | according to the characteristics of the workpiece to be cut, the tooth shape and the specification of the saw band are correctly selected | tooth saws too smal | tooth saws too smal | tooth saws too smal | tooth saws too smal | tooth saws too smal | |
| and the new saw band is used, the initial running-in is needed, the parameters are gradually increased from low speed and slow feed, For maximum service life | band saws no running or running time short | band saws no running or running time short | band saws no running or running time short | ||||
| Do not forcibly use Saw bands that have exceeded their service life | sawtooth worn and scrapped | sawtooth worn and scrapped | |||||
| According to the characteristics of the workpiece to be cut, correctly select the tooth hardness | tooth hardness Over smal | tooth hardness over small | tooth hardness over small | ||||
| The cut artefact | Observe the working surface for defects and inclusion of sand | sand or rust Poor workpiece surface, | |||||
| to cut into a bunch of workpiece, ensure correct clamping method | the workpiece moves during cutting process | improper clamping of workpiece |
Top appliance:
Application Scenario:
A corner of the workshop:
Packaging and Shipping:
Factory Tour:
Shaoxing Shangyu Hante Machinery Equipment Co., LTD is specialized in producing bimetal saw blades, carbide band saws, food saws, woodworking alloy saws and selling high-speed circular saws, saws and circular saws.
Our advantage:
1. Factory with 25 years of experience in the production of bimetallic band saw blades
2. Products have been exported to more than 60 countries and regions
3. All products have been strictly tested and quality assurance is provided
4. Provide after-sales service support
5. Main products: bimetal band saw blades, carbide band saw blades, high-speed circular saw machines, sawing machines, food processing machinery.
