Audited Supplier
SY-199E
Yes
12 Month
Flatbed-type
3.5T
CE
Standard
New
Not Support Bluetooth
as Require
as Require
BZB
Polyfoam and Carton
CE ISO9001: 2000
Guangzhou, China
84198990
Product Description
SY-199E is rectangular tube platform, and the thickness of rectangular tube is 6mm as per repair requirement of a variety of models at home and abroad, which improved in welding technology, choosing material, equipment parameters and stress intensity, etc. Precise, faster, non-working blind, be in accord with the technician habit, high grade configuration and more convenience for operation. It is particularly suitable for all kinds of import cars, commercial vehicle and SUV which need intensive stretching.
| SPECIFICATION | SY-199E |
| Length | 5200MM |
| WIDTH | 2140MM |
| HEIGHT | 520MM |
| PULLING CAPACITY | 95KN |
| RATED VOLTAGE | 220/380V |
| AIR SUPPLY REQUIRED | 0.8MPA |
| RADIUS OF PULLING | 360° |
| MAX LOAD | 3500KG |
SY-199E auto collision repair equipment, referenced and absorbed North American's advanced technology, integrated many experiences in auto collision repairing, mixed a number of patented technologies, the newest car type design technique and safety design technique of European and American several big automotive companies. It is an innovated product in the current market. With an integrated computer electronic cabinet control system, tilt lifting platform is operated by a remote control device. Three triple output oil system makes lifting, unlocking, dropping and locking possible through a key. Full automation, technological innovation, humanized design, practical working philosophy. Main functions as flowing:
· The platform is rectangular tube platform, and the thickness of rectangular tube is 6mm, welded full board of many positioning holes surround the platform, the tolerance is small for flatness, strength is big, and many station holes is convenient for fixing any tools, no tensile dead zone.
·Tilt hydraulic lifting platform makes the accidental vehicle loaded and unloaded more convenient(even drive the car onto the platform directly).
·The pulling towers can work along the track for 360° rotation, operated more convenient. The pulling towers pull strong each other and highly active, and the material is made of the 10mm wall thickness seamless pipe.
·The jaw of main clamps, spiral movements, in the jaw to maintain the level of state, the upper and lower pole vertically movements, fine-tuning the level of all kinds of different vehicle chassis height of rapid adjustment.
· The function of leading arm: provide stretching for any point and any directions during the collision repair process, provide powerful up stretching.
·High Precision alloy measuring system, it is made of special aluminum. It can make three-dimensional coordinate measure, so that make the car body size is same as the original car.
·Allocate one centralized electric control cabinet. Remote control: A key
in hand, operate freely.
·Remote controller: Make the platform lift, please press "up" key; make the platform down, please press the "down" key. When you need the tower up and down stretching, please press "tower one" key or "tower two" key.
·The global data synchronization by Mitchell and the major automotive companies provide and maintain the latest data models.
·Perfect service system, completely relieve your worries.
| SY-199E Configuration list |
| No. | Model No. | Quantity(set) | ||
| I | SY-199E | 1 | ||
| 1) | Fix leg | 1 | ||
| 2) | Flexible leg | 1 | ||
| 3) | Tilt lifting holder(oil cylinder included) | 1 | ||
| 4) | ramps | 2 | ||
| II | 360° rotation Pulling towers | 2 | ||
| 1) | Push rod of cylinder | 2 | ||
| 2) | Bolts for fixing towers | 4 | ||
| 3) | Bolt plates for fixing towers | 4 | ||
| 4) | Nut for fixing towers | 4 | ||
| 5) | in-built adjustable collars | 2 | ||
| 6) | 3.5m Main chain(with chain hook) | 2 | ||
| 7) | Protective wire | 2 | ||
| 8) | 10T high pressure cylinder | 2 | ||
| 9) | Leading arm,U-shape shelf,chain wheel | 1 | ||
| III | Tiger style main clamp | 4 | ||
| 1) | Clamp basement(M12 bolts) | 4 | ||
| 2) | Clamp Screws | 4 | ||
| 3) | Bolts, plates, nuts for fixing jaws main clamp | 4 | ||
| IV | Wheel dolly | 2 | ||
| V | Two-dimensional measurement system | 1 | ||
| VI | Centralized control cabinet(oil pipe included) | 1 | ||
| VII | Tools board(Pothook) | 1 | ||
| 1) | Pothooks | 20 | ||
| VIII | Pulling Clamping Accessories | |||
| 1) | Chains (1.2m) | 2 | ||
| 2) | Small clamp | 1 | ||
| 3) | Mini clamp | 1 | ||
| 4) | wide clamp | 1 | ||
| 5) | C-clamp | 1 | ||
| 6) | right angle clamp | 1 | ||
| 7) | Scissor clamp | 1 | ||
| 8) | Hand clamp | 1 | ||
| 9) | strut puller kit | 1 | ||
| 10) | Big hook(1-3) | 1 | ||
| 11) | Deep hook | 1 | ||
| 12) | Slotted Chain Anchor | 2 | ||
| 13) | Multi hole pull plates | 1 | ||
| 14) | nylon sling | 1 | ||
| 15) | Steel wire | 1 | ||
| 16) | Handy link | 1 | ||
| 17) | Crescent spanner | 1 | ||
| 18) | Double Chain Hook | 1 | ||
| 19) | Down-pulling Device | 1 | ||
| 20) | Use of winch | 1 | ||
| 21) | Wheel bracket | 2 | ||
| Operating manual | 1 | |||
