Audited Supplier
CE approved DM542 24V dc Motor Driver with factory price (for 42 and 57 60 2phase stepper motors)
Application
(Stepper motor, electrical motor,brake motor,motor driver,gear motor,bldc motor,brushless motor)
DM 542 is Microstep 2phase motor drive,It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on.
Capable of driving for 42 and 57,60 two-phase stepper motors
Description
1.A two phase stepper motor that can drive 4 lines and 8 lines
2.Voltage input range: 18~48 VDC
3.Maximum current: 5.6A, resolution: 0.1A
4.Subdivision: 200~51200ppr
5.Signal input: differential / single ended, pulse / direction or double pulse.
6.Pulse response frequency: 200KHz Parameter configuration can be carried out by serial port
7.Built-in micro fineness Automatic parameter setting function Precision current control reduces the heat of the motor 8.greatly Automatic halving current at rest Light isolation signal input, strong anti-interference ability
9.Protection functions such as overvoltage, over current and so on
Control signal interface
Name | Function |
PUL+ | Pulse input signal: The effective pulse is adjustable and the rising edge of the default pulse is effective. In order to reliably respond to the pulse signal, the pulse width should be greater than 1.2 s. If 12V or 24V is used, the series resistance is required. Double pulse mode: CW |
PUL- | |
DIR+ | Directional input signal: High / low level signal, in order to ensure reliable commutation of the motor, the directional signal should be established at least 5 s before the pulse signal. The initial operation direction of the motor is related to the wiring of the motor windings. The switching of any phase windings (such as A , A-switching) can change the initial operation direction of the motor. If 12V or 24V is used, the series resistance is required. Double pulse mode: CCW |
DIR- | |
ENA+ | Enable the control signal, which is used to enable or prohibit driver output. When ENA is connected to a low level (or an internal optocoupler is turned on), the driver cuts off the current of each phase of the motor so that the motor is in a free state and does not respond to stepping pulses. When the function is not needed, the signal end can be suspended. If 12V or 24V is used, the series resistance is required. |
ENA- |
Running current setting
Output peak current | Output current value current | SW1 | SW2 | SW3 |
Default | off | off | off | |
2.1A | 1.5A | on | off | off |
2.7A | 1.9A | off | on | off |
3.2A | 2.3A | on | on | off |
3.8A | 2.7A | off | off | on |
4.3A | 3.1A | on | off | on |
4.9A | 3.5A | off | on | on |
5.6A | 4.0A | on | on | on |
Installation Size
Driver Wiring Diagram
product display
Factory Photos
(Stepper motor, electrical motor,brake motor,motor driver,gear motor,bldc motor,brushless motor)
(Stepper motor, electrical motor,brake motor,motor driver,gear motor,bldc motor,brushless motor)
Raw Material
(Stepper motor, electrical motor,brake motor,motor driver,gear motor,bldc motor,brushless motor)
(Stepper motor, electrical motor,brake motor,motor driver,gear motor,bldc motor,brushless motor)
Shipping:
Our goods(Stepper motor, electrical motor,brake motor,motor driver,gear motor,bldc motor,brushless motor) can be shipped by Express(DHL,UPS,FEDEX,TNT,EMS),By air,By sea,we will pack them perfect and will not impact the shipping. For the shipping cost, we have good price and strong ability shipping company, customers don't worry about the shipment.
All the derived motor products of us can be customized according to your requirements.
1. Performance and parameters of Motor can be customized,our engineer can finish it from your motor diagram or samples to us.
3. We will reply your inquiry about motor in 24 hours.
4. T/T ,Wester Union, Paypal in advance, 30% deposit, 70% balance before shipment.
5. 1 Year warranty time for our goods,any technical problems, pls feel free to contact us
1. Do you have online contact info:
A1: Yes
2. How can we know the product quality?
A2: We suggest you to order a sample. Also, you can send us email for detail photos for checking if you cannot get enough information in the product page.
3. How can we get your catalog?
A3: Please go to below website link to download it .
4. Can we have free sample?
A4: Yes sure, but please pay the shipping cost by youself.
5. Is this your final price? May i have the discount?
A5: Our price is the factory price, and if your quantity is larger, we will allow the discount for you.
6.Is there cheap shipping cost to import to our country?
A6: Yes, we have our regular shipping company, they have very good price.
7. Can we visit your factory?
A7: Yes welcome warmly. Our address is No.6,Lane 3841,Huqingping Road ,Qingpu Disctrict,Shanghai,China.
8.What is the Warranty for your products?
A8: One year warranty for all electronic products. If any quality problems on our side occured in this period, we will take on the shipping cost and replacement.
Company Certificates
(Stepper motor, electrical motor,brake motor,motor driver,gear motor,bldc motor,brushless motor)
