Audited Supplier
High Quality General Purpose Floor Locks Heavy-duty 4inch/5inch/6inch/8inch floor lock brake
Floor locks keep carts, mobile racks, or other wheeled equipment stationary. They are an alternative to caster-mounted brakes. The locks are typically mounted between two swivel casters on carts with a single pair of swivel casters, or they are mounted on diagonal corners on carts with four swivel casters. The locks have a foot pedal that users step on to engage a spring-loaded brake pad that presses against the floor to create friction and prevent the caster wheels from moving. The extended height of the lock should exceed the mounting height of the casters it will be used with by 1/16" to 1/4".General purpose floor locks are made from zinc-plated steel and have a top mounting plate for attaching the lock to carts and other equipment. They are suitable for use with light-duty to medium-duty casters.
Heavy-duty adjustable-height floor locks have zinc-plated cast steel bodies and are stronger and more abrasion resistant than general purpose floor locks. They also have a lower profile than other styles of floor locks, which helps ensure sufficient ground clearance when the locks are used on low-profile carts. The locks' adjustable-height friction pads allow them to be used with casters in a range of heights. The height of the pads can be adjusted as the pads wear over time to help maintain proper locking and unlocking action. The bottoms of the friction pads have suction cups for increased grip. The locks have a top mounting plate for attaching them to carts and other equipment.
| American style floor lock brakes | |||||||
| For 2 Series Casters | For 4&6 Series Casters | ||||||
| Model No | FL2030 | FL2040 | FL2050 | FL4040 | FL4050 | FL4060 | FL4080 |
| Size | 3 inches | 4 inches | 5 inches | 4 inches | 5 inches | 6 inches | 8 inches |
| Extended Heigh | 121mm | 140mm | 159mm | 149mm | 169mm | 197mm | 247mm |
| Retracted Heigh | 94mm | 114mm | 131mm | 125mm | 141mm | 169mm | 219mm |
| Top Plate Size | 62x92mm | 100x114mm | |||||
| Bolt Hole Spacing | 71mmx78/45mm | 67x76mm/76x92mm | |||||
| Bolt Hole Size | 8.2mm | 11mm | |||||
| Japanese style floor lock brakes | |||||||
| Model No | Extended Heigh | Extended Heigh | Size | Weight | Bolt Hole Size | ||
| FL5040 | 151mm | 125mm | 4inches | 2kg | 11mm | ||
| FL5050 | 172mm | 146mm | 5inches | 2kg | 11mm | ||
| FL5060 | 198mm | 158mm | 6inches | 2kg | 11mm | ||
| FL5080 | 248mm | 208mm | 8inches | 2kg | 11mm | ||
We not only produce various standard casters commonly used in the industry, but also provide customized services according to customers' requirements.
1.Q: Are you manufacture or trading company?
A: We are manufacture. Our factory has been specializing in all kinds of caster wheels since 2014.
2.Q: Where is your factory? Can I visit ?
A: Our factory is located in Dongguan, Guangdong China. It's an hour's drive from Guangzhou Baiyun International Airport.You are warmly welcome to visit whenever you are available.
3.Q: What is your delivery time?
A: In general, within 20 days. It also depends on the order quantity.
4.Q: What is the term of payment?
A: Payment terms: 50% of deposit upon signing the PI, and balance will be cleared by T/T or L/C before delivery.
5.Q: Can I get some samples? And what's the timing?
A: Yes, samples are available at any time. We charge some sample cost and will return it during the next order.
6 .Q: How can your factory control the quality?
A: Quality is at the forefront of our commitments to our customers always. We have strict quality management process from raw
material to finished product. Details please ref below:
-- Material Vendor Assessed.
-- Incoming material inspected(IQC)
-- In-line product 100% Check(QC)
-- 100% inspect before packing(QC)
-- According to standard or customer's requirement to check random after final packing to ensure the quality(QA)
7. Q: What's the MOQ?
A:Normally we take the order no matter it's big or small. If your qty is less than 4pcs per SKU, we will arrange it in our sample room specially.
8. Q: Can I make my own brand?
A: Yes, we do both OEM and ODM, so you can make your own logo on the bags.
