Audited Supplier
Joint compound for Gypsum Board/Drywall /ceiling
LEGEND Gypsum board (plasterboard) jointing compound is plaster-based (gypsum based), made up of fine semi-water gypsum powder added to the metering adhesive, which is suitable for gap filling of building wall panels. Such as: cement board, gypsum board, roof, nail holes and other filling and the need for caulking parts. This product has strong adhesion and is an indispensable accessory for interior decoration.
Specification:
 |
Adavantages
It has the characteristics of high bonding strength, small shrinkage deformation, good suitability and excellent construction performance. It is suitable for the joint treatment of gypsum board to fill nail holes and large gaps, superior performance, high efficiency against cracking.Product Uses
Gypsum board ceiling partitioning, batching on the wall surface, unpainted white cement wall, wall cracks, etc. It can prevent cracking, fast curing, high hardness and easy construction. Gypsum board joint treatment and joint paper tape paste, can also be used for the filling of gypsum board surface and full batch leveling.
Installation Instructions
(2) Place the gypsum joint powder in a clean container, then add water (the ratio of powder to water is 1: 0.4) and mix thoroughly to form a gel.
(3) The adjusted powder is evenly filled with the gap formed by the bevel of the edge of the gypsum board, and then the paper joint tape is laid along the seam and the joint tape is pressed into the freshly scraped powder.
(4) There should be enough powdery glue under the joint tape to ensure that the glue is firm, and then scrape a thin layer of powder. This can reduce the occurrence of edge curling or wrinkling (usually scraping twice)
(5) If it is mixed with water, please use it within 60 minutes or the powder will not cure.
20kg of this bag can be used for gypsum board joint around 35 square meters.
For full batch leveling, the amount depends on the specific coating thickness.
Shandong Legend building materials Co.,ltd is a professional manufacturer in China specializing in Gypsum products, Metal Profiles & Ceiling Tee Grid etc for Interior Ceiling & Wall Partition System.
LEGEND With registered capital RMB30millon, and total investment RMB150 million. The factory covers an area of more than 30,000m2.building area is more than 20000m2.We have over 300 employees including 16 first-class technicians. We have an annual capacity 20,000,000 square meters of top grade gypsum products.30000 Tons metal profiles and aluminum ceiling tiles and total income is RMB900 million.
Now legend know which materials and brands are better used, which are prone to quality problems in future, and the impact of different climate and environment on the materials...
Legend will continue to try and explore so that to better understand engineering requirements and customer Needs.
LEGEND building materials Co.Ltd has been certified by ISO9001: 2008, ISO14001:2006 international quality management system, SGS, BV, INTERTEK, and SONCAP CERTIFICATE.Our products meet international standards, such as CE,ASTM C 1396, EN520:2005, AS/NZS 2588 Standards,GB-T7911-2008, etc.
