Audited Supplier
PEO-S-160/22/0.4
Power, Electronic, Power Transmission
Three
Core-type Transformer
Oil-immersed Type Transformer
Two-winding Transformer
ISO9001-2000, ISO9001, CCC, Kema
Power Transformer, Distribution Transformer
High Frequency
U
Pearl Electric
Oil Immersed Distribution Transformer
IEC 60076
50-2500kVA or Customized
22kv or Customized
0.4kv or Customized
4 %
Oil-Immersed
Silicon Steel
Copper/Aluminum
60/65K
Dyn11/ Yyn0
a-Class
Mineral Oil as Per IEC 60296
as Per IEC Standard
as Per IEC Standard
PEARL ElECTRIC(PE)
Wooden Pallet, Wooden Case
China
8504349000
Product Description
Customized Oil-Immersed Power Distribution Transformer
OUTLINE DRAWING:
(Note: Above ourline drawing is for reference only, not for approval.)CONSTRUCTION:
-CORE
The core is manufactured from cold-rolled grain oriented, (CRGO) silicon steel. The steel sheets are cut into required dimensions on automated machines thereby ensuring reduced air gap, low exciting current and low noise. Each lamination is insulated from each other to ensure a long trouble-free lifetime of the core. Using 45° stepping all leaning lamination way to laminate. So the no-load current are reduced efficiently.
-WINDINGS
LV winding is manufactured with high quality foil conductor or copper wire, and the ampere-turn is balanceable. The additional loss is low and the ability of anti-short is improved. Oil drawings of heat dispersion are scientifically used in the winding, and the surface of heat dissipation is increased, so the temperature is reduced and the ability of over-load is improved.
HV winding is manufactured with high quality copper wire and excellent design structure. It improves the distribution of electric field. With lighting impulse analysis, the ability of anti-lighting impulse has been improved.
-TANK
The tank is jointed with high-quality steel. The surface is eliminated rust phosphate coating and pained with the type of FVC anticorrosive paint. It has ability to prevent the corrosion from oil and chemical matter. It can be broadly applied to outdoors with bad environment for its contour artistic, easily installation and maintenance free.
-INSULATION OIL
The insulating oil is inhibited, without PCB and generally complies with IEC60296.
-STANDARD ACCESSORIES
1. Thermometer
2. Pressure relief valve
3. Oil level gauge
4. Lifting lugs
5. Drain and sampling valve
6. Nameplate
7. Earth terminals
8. Terminal box
9. Over pressure replay
-CORE
The core is manufactured from cold-rolled grain oriented, (CRGO) silicon steel. The steel sheets are cut into required dimensions on automated machines thereby ensuring reduced air gap, low exciting current and low noise. Each lamination is insulated from each other to ensure a long trouble-free lifetime of the core. Using 45° stepping all leaning lamination way to laminate. So the no-load current are reduced efficiently.
-WINDINGS
LV winding is manufactured with high quality foil conductor or copper wire, and the ampere-turn is balanceable. The additional loss is low and the ability of anti-short is improved. Oil drawings of heat dispersion are scientifically used in the winding, and the surface of heat dissipation is increased, so the temperature is reduced and the ability of over-load is improved.
HV winding is manufactured with high quality copper wire and excellent design structure. It improves the distribution of electric field. With lighting impulse analysis, the ability of anti-lighting impulse has been improved.
-TANK
The tank is jointed with high-quality steel. The surface is eliminated rust phosphate coating and pained with the type of FVC anticorrosive paint. It has ability to prevent the corrosion from oil and chemical matter. It can be broadly applied to outdoors with bad environment for its contour artistic, easily installation and maintenance free.
-INSULATION OIL
The insulating oil is inhibited, without PCB and generally complies with IEC60296.
-STANDARD ACCESSORIES
1. Thermometer
2. Pressure relief valve
3. Oil level gauge
4. Lifting lugs
5. Drain and sampling valve
6. Nameplate
7. Earth terminals
8. Terminal box
9. Over pressure replay
ADVANTAGE:
1. Low loss, low noise, low partial discharge.
2. Strong anti-short circuit capability and high anti-lightning impact level.
3. Excellent moisture resistance for operation at 100% relative humidity.
4. Strong overload capability for long-term operation at 150% loading.
TEST REPROT:
1. KEMA Test Report for Oil immersed Transformer
2. CE Test Report for Oil immersed Transformer.
3. CNCE Test Report for Oil immersed Transformer.
4. CEST Test Report for Oil immersed Transformer.
5. CTQC Test Report for Oil immersed Transformer.
6. CNAS Test Report for Oil immersed Transformer.
ABOUT US:
PEARL ELECTRIC CO., LTD
Established in 1958, located in Guangzhou City, Pearl Electric Co., Ltd is one of the most prominent power transformer manufacturer in China which design, produce and supply power transformers in domestic and abroad with almost 660 employees, more than 260 sets of specialized manufacturing equipment and 90,000 square meters area .
INDUSTRIAL USERS IN DOMESTIC AND ABROAD
FAQ:
1.Q: Are you manufacturer?
A: Yes, we are manufacturer. Our factory is in Guangzhou City, Guangdong Province.
2.Q: Can I get guarantee of products?
A: Yes, every product is 1 year quality warrantee under customer correct using the products.
3.Q: Do you have any Certificate?
A: Yes. Each of our unit has CE, 3C and KEMA certificate. If you need any other Certificate, we can help you to apply it.
4.Q: How can I pay you?
A: Pay by T/T and L/C is acceptable.
5.Q: What about the production?
A: In general, it take 4~6weeks and it depend on the different style.
Any need for power transformer, please feel free to contact us.
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Pearl Electric Co., Ltd.
Add: No. 118 Donghuan Road, Donghuan Street, Panyu Distric, Guangzhou City, Guangdong Province, China. ZIP: 511400
Web:pearl-electric.en.made-in-china.com
