High Shear Homogenizer Mixer Machine Cosmetic Cream Mixer Emulsifying Lab Homogenizer Emulsifier Mixer

• Internal Suction Structure: High speed homogenizer adopts internal suction homogenizing structure, which can carry out efficient homogenization, emulsification and extraction of trace organic compounds in water, lipid solubles and soluble organic solvents between two immiscible liquids.
• Application: Homogenizer can make the cell membrane rupture to the nuclear separation, and can be used at different speeds to make the DNA strand break, or make the large molecules into small molecules of material fracture.
• Working Mode: This high speed homogenizer can work continuously for no more than 3 minutes at a time. It is generally recommended to play for 1?2 minutes to pause for 1?2 minutes, which can be repeated several times.
• Button Adjustment:The working speed of the homogenizer can be adjusted by rotating the button. When used at high speed. It can make all kinds of animal and plant tissues to achieve the purpose of uniform mixing. When used at low speed, it can be used as a mixer.
• Homogenizing Function: The high speed homogenizer has a suction homogenizing function. It can emulsify the efficient homogenization between two immiscible liquids and emulsify the trace organic matter in water. Extraction of soluble substances and organic solvent soluble substances.

Product Model	SAH500S-H 50G	SAH500S-H 70G	SAH500S-H 90G
Voltage	AC220V 50/60Hz	AC220V 50/60Hz	AC220V 50/60Hz
Input Power	850W	850W	1350W
Output Power	500W	500W	800W
Rated Torque	34.1N.cm	34.1N.cm	69.5N.cm
Working System	S1(Continuity)	S1(Continuity)	S1(Continuity)
Operation Control Method	Combined control knob	Combined control knob	Combined control knob
Speed Adjustment Range (no load)	1000-14000rpm	2000-14000rpm	2000-11000rpm
Speed Control Type	Infinity	Infinity	Infinity
Digital Revolution Indicator	LED(Digital)	LED(Digital)	LED(Digital)
Max. Torque of Working Head	34N.cm	34N.cm	69.5N.cm
Max. Linear speed of Rotor	16m/s	20.5m/s	22m/s
Working Head Material	SS 316L Stainless Steel	SS 316L Stainless Steel	SS 316L Stainless Steel
Working Head Diameter	50mm	70mm	90mm
Min./Max. Immersion Height	50/236mm	50/236mm	50/236mm
Stator Standard Configuration	Square hole/long hole/inclined hole	5mm²/20mm²/50mm²	5mm²/20mm²/50mm²
Processing Capacity (H2O)	300-20000ml	500 ~ 40000ml	800-60000ml
Max. Processing Viscosity	8000mPa.s	8000mPa.s	8000mPa.s
Allowable Ambient Temperature	less than 40 ºC	less than 40 ºC	less than 40 ºC
Allowable Relative Humidity	less than 80%	less than 80%	less than 80%
Timing Control Range	1-1000min	1-1000min	1-1000min
Machine Size	215*310*720mm	215*310*720mm	215*310*720mm
Machine Weight	9.2kg	9.2kg	10.8kg

Model	JRJ300-D-1	JRJ300-SH(digital display)
Input power	500W	500W
Output power	300W	300W
frequency	50/60HZ	50/60HZ
Rated power supply	AC220V	AC220V
Speed range	300-11000rpm	300-11000rpm
noise	79dB	79dB
operation temperature	<120ºC	<120ºC
Processing capacity(H2O)	40L	40L
Working head diameter	Ф70mm	Ф70mm
Total length of work head	260mm	260mm
Immersion depth of material	200mm	200mm
Suitable volume	200-40000ml(H2O)	200-40000ml(H2O)
Applicable viscosity	<5000cp	<5000cp
Stator configuration	5mm2,20mm2,50mm2	5mm2,20mm2,50mm2

The production of the Pyroceram Top Hotplate introduce
1.Start by the blanking process for the metal part

Normally the house of the  Lab Dry Bath Incubator Heater machine medical was made by the steel or stainless steel of type as 316
The part was beginning as the blanking
1.Laser blanking machine capacity :8000*2000*10mm 
2.We had about 15 pcs of the laser cutting machine in blanking workshop ,name from No1 to No 15,
3.6S fully carry out in our workshop according to the iso13485,
4.All of the raw material can be Traceability

The press brake machine is a powerhouse in the metal fabrication industry, providing an efficient and successful method to bend sheet metal into different forms
To form the metal part into the shape we need ,the first part was by the bending press and the bending die

 

Stainless Steel :Provides great strength and resistance to corrosion, but its greater spring back the ability to revert to its original shape after bending means that it must be handled carefully. 

 

Overhead Laboratory Homogenizers Hot Plate Max 716°F, 100-2000RPM Hot Plate with Overhead Rotor stator Homogenizers , 2000mL Rotor stator Homogenizers
 need the bracket for the motor and metal stamping part for the housing and electric connect part,The progressive die stamping can give out the huge volume and low cost for the LED Digital Hotplate Overhead Rotor stator Homogenizers Hot Plate with Ceramic Coated Lab Hotplate, 280ºC Stir Plate, Overhead Mixer 3,000mL Stirring Capacity, 200-1500rpm, Stirring Bar Lab Equipment machine spare metal part.

The Medical Sterilization machine need a lot of welding ,to imporve the capacity and welding quality we introduce the welding robot machine instead of labor human welding
1.QTY of the welding robot :23pcs
2.Capacity of the welding robot :500A
3.Work station:2000*1500mm

Plastic part was one part of theLaboratory Thermostatic Heater machine
We had about 10 sets of the plastic injection work for the Laboratory Thermostatic Heater machine.
1.The capacity for plastic injection machine was :1000*850*750mm
2.The max ton for plastic injection machine was 1000T

The 6S was fully carry out in our warehouse with the ERP system 
1.We need to know how many part in our warehouse
2.We need to anticipate the part when to full fill in for all the benchtop Laboratory Thermostatic Heater with Drying Function Water Storage Tank 

The rotor was the key part for the Hot Plate Rotor stator Homogenizers with Time Setting Speed Adjusting Rotor stator Homogenizers Mixer  Equipment ,to make it perfect especial for the high speedHot Plate Rotor stator Homogenizers with Time Setting Speed Adjusting Rotor stator Homogenizers Mixer Machine  Equipment ,we need to control the tolerance of the rotor very tight,that was why we introduce the Hot Plate OverHead Rotor stator Homogenizers with Time Setting Speed Adjusting Rotor stator Homogenizers Mixer Machine Equipment
1.CNC QTY:15PCS
2.Tolerance for CNC machine :0.01mm

All  Multifunction Steam Sterilization Machine need to be test before transfer it to the warehouse.

Customer review our Laboratory Rotor stator Homogenizers  Machine workshop,We were welcome all of our customer to visit our company to review and test the ultrasonic homogenizer for Organisms, Medical, Chemistry,Our business vision was :long term business ,win-win for the future

Warehouse and stroage for the medical Medical Sterilization Machine,the temperature should be control within 18-25° for all equipment and test machine ,all the record can trace within 3 years.
 

The maintain and repair guarantee for the Medical Sterilization Machine workshop was the key to the business ,when a customer bought a machine from us ,the guarantee was the most importance things customer concern.we sent out technical service team to oversea customer site for the maintain and repair for our customer .Our service for the lab equipment was not stop after the Vacuum Steam Machine Machine sold ,it was the start for our company and your company for win win situation .You use the Vacuum Steam Machine Machine we take care of the rest.

We take part into the MedtecChina Canton Fair (The China Import and Export Fair) exhibition every year ,hope one day we can meet each on the fair

The supplier and the customer was togeher for the future ,both parties should be in win-win situation ,so we were looking forwarder to hold hand by hand for bright future.

he compact digital homogenizer unit includes a high-watt motor Utilized speed regulation with six different speed levels for accurate speed adjustment Designed with a digital control interface allows users to precisely set and monitor parameters Fitted with reusable sample tubes that come with specialized attachments or beads for effective homogenization Improved ABS and aluminium die-casting materials are used in the body's construction Built-in with safety features to reduce exposure to dangerous materials and prevent sample contamination Easily adjustable with simple cleaning Minimal maintenance with safety and long-term usability
Item Type: Adjustable High Speed Homogenizer
Material: ABS
Motor Speed: 22000 rpm
Homogenizing Knife 1: 8000-18000 rpm
Homogenizing Knife 2: 8000-20000 rpm
Power: 185W
Continuous Working Time: 3 minutes

How to Use:
Direct installation and use.

packing list:
1 x Homogenizer
1 x Instruction Manual
4 x Measuring Cup
2 x Stand
3 x Fixture
4 x Accessories

Note:
1. The instrument should be placed on the horizontal worktable, the installation of the required homogenizing tool must be in place, turn on the power to try the machine first with a cup or vessel containing water, so that the pentalobe cutter head is submerged in the water, open the power switch, there is a slow to fast to adjust the speed knob, there is no clear metal friction sound (such as metal friction sound, shut off the power, loosening expenditure cutter 6M/M support tightening screw, the external fixed set of randomly steering up to the installation of in place, and then tighten) can work only after the completion of the work. If there is no metal friction sound, turn off the power, loosen the 6M/M support screw of the cutter and install the outer fixing sleeve in place randomly.
2. Cut the plants or microorganisms to be experimented into small pieces or , put them in the randomly equipped glass ware, clamp them in the middle of the magnet bracket (heptagonal), loosen the 8M/M fastening screws of the fixed motor base, slowly move downward against the mouth of the vessel, make the homogenizing head 23mm from the bottom of the vessel as well, and then tighten the 8M/M screws.