Audited Supplier
beest lz9/1200
LZ Straight-Line Metal Drawing Machine
Wire, Rope Wire, Prestressed Steel Wire, Standard Parts
Steel
0.5-7.0mm
22mm
1200mm
10
REACH, RoHS, ISO
New
PC Wire and PC Strand
9--14mm
0.5--9mm
30m/S
1250
21%
Beest
Container
90kw--132kw
China
846310
Product Description
1. LZ-9/1200 Strand Drawing Machine Customer List
2. Technical parameters
2.1. Drawing Block diameter and number of blocks: φ1200mm ,9 blocks.
2.2. Inlet wire diameter: φ14-φ9, outlet diameter:φ9-φ3.
2.3. Max compression ratio 21%, Min.15%.
2.4. Designed speed 8m/s, working speed 5-7m/s;Pay-off speed ~ 2 m/s.
| Wire dia. (mm) | Total ted. | Quantity of dies | Aver.red. | Material (%C) | Outlet Speed (m/s) | Eff. | Actual production | Double times | ||
| input | output | kg/hour | t/year | t/year | ||||||
| 8 | 3.18 | 84.2% | 9 | 18.54% | 0.82 | 7 | 75% | 1178 | 8480 | 16960 |
| 11 | 4.25 | 85.1% | 19.05% | 7 | 2104 | 15146 | 30293 | |||
| 12 | 4.25 | 87.5% | 20.60% | 7 | 2104 | 15146 | 30293 | |||
| 12.5 | 5.05 | 83.7% | 18.24% | 6 | 2546 | 18330 | 36661 | |||
| 12.5 | 5.05 | 83.7% | 18.24% | 6 | 2546 | 18330 | 36661 | |||
2.5. Inlet wire strength: less than 1250MPa Outlet wire strength 1960 MPa
2.6. Cooling type:
Drawing Block cooling: using forced circulation water and independent air cooling, with water flow display; water flow sensor, this sensor switches off the drawing machine when the water pressure and water flow drops;Drawing Block temperature: max 30°CDie box cooling: close-type water cooling, with water flow display
2.7. Start & normal stop time: 5-30s; emergency stop: 3s
2.8. Equiped with synchronizing pay-off and take-up machine ;
2.9. Spool size (in take-up spooler):
Ø 500(barrel) X 964(overall width) X Ø 1250(flange), inner dia. Ø120, spool weight: 3500 kg2.10. Each group drawing machine can be jog running or link running;
2.11. With corrector, and meter counter; counter accuracy 0.1%
3. Main parts
3.1. Pay-off stand:
non twisting structure, fly jib and horizontal combination
3.1.1 Pay-off max. Load: 5T
3.1.2 Pay-off stand total length: 9000; sliding beam length: 6000
3.1.3 Fly jib threading lever has a guide pulley.
3.2. Wire drawing unit
3.2.1. Drawing machine rack
Each drawing unit works as an independent rack, 1st-9th rollers slanting installation, Wire accumulation height of drawing blocks: about 300mm,The 9th rail is assembled with the guide roller
3.2.2. Drawing motor
Motor power: NO.1-9, 110 KW; rotating speed: 960rpm,Power supply 380V 50HZ3.2.3 Reducer gear box
Reducer gear boxvertical input; output vertically upward cone cylindrical gear transmission as hardened reducer to ensure the service life of 30,000 hours. Reducer noise is less than 85 db; Equipped with lubricating oil pump, filter and oil cutting-off protection. Reducer gear box lubricating oil applies L-CKD320(GB5903-1995).3.2.4. Drawing block
All the capstan material: Forging steel 42CrMo alloy steel, surface hardening, hardness ≥ HRC58, ensuring accumulated line height greater than 300, and the service life more than 3 yeas.The internal surface of all the Drawing Blocks has anticorrosive coating3.2.5. Cooling fan
Fan: power 2.2KW, independent air cooling3.2.6 Sensor
German Turck non-contact sensor, roller applies GCr153.3. Dies box
3.3.1. Steel plate welded structure, drawing die size: Æ70´40mm; No water leakage ; All fixed moulds. All close-type mould cooling.
3.3.2. 1th and 9th dies box are equipped with rotating dies, others are equipped with motors to stir the drawing powder
3.3.3. Dies box can be adjusted in the wire running direction up and down,left and right
3.3.4. Guide wheel assembled in front of the mold box (material GCr15, hardness ≥HRC60). NO. 2-8 can run wire-jump operation.
3.4. Straightener
Straightener roller: 7+7 vertically and horizontally for each shift.
3.5. Take-up machine
Equiped with arrange-wire device, its performance could meet the supporting use of the whole machine, Take-up machine power: 1.5/55KW, 1500rpm/min, AC variable frequency , achieving functions of pneumatic lifting,tight force and push off. Line pressure not less than 0.4MPa.
