Audited Supplier
| Project | Name | specification | Unit |
| Process range | Max bed rotating diameter | Φ400 | mm |
| Maximum processing length | 500 | mm | |
| Maximum processing diameter (shafts) | Φ75 Φ45 | mm | |
| Maximum processing diameter (disk type) | Φ400 | mm | |
| X / Z / Y X2 / Z2 / Y2 | X / Z / Y axis travel | 500 / 600 / 100 | mm |
| X2 / Z2 / Y2 Axis Travel | 400 / 650 / 300 | mm | |
| Repetition accuracy X / Z / Y | ±0.003 | mm | |
| Position accuracy | ±0.005 | mm | |
| Movement | X / Z / Y | 30/30/28 | mm |
| X2 / Z2 / Y2 | 24/30/18 | mm | |
| Screwdriver | X / Z / Y | 32/36/40 | mm |
| X2/Y2/Z2 | 32/33/25 | mm | |
| Rails | X / Z / Y | 35/35/30 | mm |
| X2/Y2/Z2 | 30/35/25 | mm | |
| Turrets | Turrets | 12T | |
| Turning tool specifications | 25X25(rectangular) | ||
| Bore cutter specification | Φ25 Φ32 | mm | |
| Spindle | Positive/sub spindle nose form | A-26(75) / A2-5(45 ) - A2-4(36) | / |
| Through-hole diameter of main/sub spindle | Φ75(Φ45) / Φ36 | mm | |
| Positive/sub spindle speed | 3500-4500 / 5000 | rpm | |
| Control System | Positive/sub spindle motor power (electric spindle) | 18.5 / 7.5 | kw |
| X / Z / Y axis servo motor | 3.0 /2.2 / 2.0 | kw | |
| X2/ Z2 / Y2 axis servo motor | 1.8 / 2.0 / 1.0 | kw | |
| Turret power head milling cutter motor/backside shaft end motor | 2.0 / 1.0 | kw | |
| Dimension | Length/Width/Height | 2700 X 1950 X 2050 | mm |
| Heavy | 4.9 | T |
• High-precision machining: the machine tool has high requirements on machining precision, and can meet particularly fine cutting requirements, such as internal and external precision, roundness, coaxiality and so on.
• Multiple processes: the machine can simultaneously complete a variety of multiple and complex processing procedures, including a variety of radial and axial cutting, drilling, tapping, hobbing, scribing, drawing and so on.
•The spindle set is made in Taiwan. The main shaft grab tool is based on the butterfly spring on the main shaft, and the tension is applied to the pull nail of the tool handle through the four-jaw broach mechanism, which is closely matched with the taper hole of the main shaft to realize the grab tool.
• The use of low inertia spindle motor, short acceleration time, improve tapping speed and quality. Spindle direct drive, with spindle orientation function.
All three axes use C3 grade precision screws with pre tensioning design, effectively suppressing temperature rise and prolonging, ensuring repeated positioning accuracy.
The three axes all adopt P-grade roller type rail, which achieves high rigidity and high load capacity in four directions through contact between the rolling element and the sliding rail line
Imported horizontal machining center, vertical machining center, CNC boring machine (rotating table) and gantry guideway grinding machine, effectively ensure the accuracy of the workpiece, greatly improve the assembly accuracy, and the durability of the accuracy.
Advanced detection methods
Positioning accuracy test and best correction with laser, using strict German VDI3411 inspection specification (5 times each)
Each machine tool must go through a strict processing side test before leaving the factory to ensure that it can accept the test of actual processing and meet the corresponding processing accuracy requirements.
• CNC machine center integrates the function of milling, drilling and tapping• CNC Machining for various size of the metal profile, such as aluminum, steel, copper and non-metal materials
• CNC Vertical Machine tools is widely used in industries of 3C electronics, rail transportation, aerospace, liner module guide rail and etc.
1.What's the Payment Terms?
A: T/T, 40% initial payment when order, 60% balance payment before shipment.
2.What is your trade terms?
A:FOB CFR and CIF all acceptable.
3.When is the delivery time?
A: If the machine you will order is standard machinewe can ready the machine within 30days. if some special machines will be some longer.You can place order accordingto delivery time and ship time we will give you the answer accordingly.
4. What is your minimum order quantity and warranty?
A: MOQ is one set, and warranty is one year.
5. What is the package of the machines?
A:The machines standard will be packed in wood case.
6:How can I choose the most suitable machines ?
A: Please tell me your specifications ,we can choose the best model for you , or you can choose the exact model .
You can also send us the products drawing ,we will choose the most suitable machines for you .
