![]() | Plastic Biaxial Geogrid Plastic biaxial geogrid is the kind of geosynthetic material which is widely used to reinforce retaining walls, as well as subbases or subsoils below roads or structures. Plastic biaxial geogrid is often made from plastic materials which may be high-density polypropylene or high-density polyethylene (HDPE) resins through the processes of extruding, sheet forming, punching and stretching. Advantages *Improve the stability and bearing capacity of the roadbed, and extend the service life; * Provent the deformation and cracking of subguarde caused by the loss of subgrade materials; * High strength,good fiexibility,anti-aging,resisting acid and alkaline; * The filling capacity of retaining wall is improved, the earth pressure of retaining wall is reduced,the cost is saved, the service life is extended, and the maintenance cost is reduced. |
![]() | ![]() | ![]() |
Property | Test Method | TGSG 15-15 | TGSG 20-20 | TGSG 25-25 | TGSG 30-30 | TGSG 35-35 | TGSG 40-40 | TGSG 45-45 | TGSG 50-50 | TGSG 60-60 | |
Ultimate Tensile Strength (KN/m) | MD | ASTM D 6637 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 |
CD | ASTM D 6637 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |
Elongation at Maximum load(%) | MD | ASTM D 6637 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 |
CD | ASTM D 6637 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | 13 | |
Tensile Strength at 2% Elongation (KN/m) | MD | ASTM D 6637 | 5 | 7.5 | 9 | 10.5 | 12 | 14 | 16 | 18 | 27.5 |
CD | ASTM D 6637 | 5 | 7.5 | 9 | 10.5 | 12 | 14 | 16 | 18 | 27.5 | |
Tensile Strength at 5% Elongation (KN/m) | MD | ASTM D 6637 | 7 | 14 | 17 | 21 | 24 | 28 | 32 | 35 | 48 |
CD | ASTM D 6637 | 7 | 14 | 17 | 21 | 24 | 28 | 32 | 35 | 48 | |
Minimum Carbon Black | % | ASTM D 4218 | 2 | ||||||||
Roll Width(M) | 1-6 | ||||||||||
Roll Length(M) | On Request |
![]() | ![]() |
![]() | ![]() | ![]() |
PACKAGE
![]() | ![]() | ![]() | ![]() |

DXD is dedicated to an objective of continuous commitment to quality. This dedication begins with the manufacture of the geosynthetic material and ends only when our customer has accepted our products. The employees of DXD, therefore, endorse and require a policy of Total Quality. This policy is based on the principle that quality is the fundamental responsibility of every department and is carried out by each person in that department.
Programs and procedures designed to implement this quality principle are developed by the Quality Control Department and are utilized by every employee of the Company. DXD Manufacturing processes are ISO 9001:2015 registered.
Application
1.Enhance the bearing capacity of road foundation and extend the duration of roads.
2.Prevent road surface from collapse, crack and being dirty.
3.Be convenient for construction, timesaving and cut down the cost of maintenance.
4.Prevent tunnel from crack occurring.
5.Further solidity slopes to proof water and soil from losses.
6.Reduce the surface thickness of the ground.
7.Consolidate the net for growing grass on the slopes so as to stabilization surrounding virescence.
8.Be used for artificial top net of mines instead of metal ones.It is of fire-retardant and anti-statics.
![]() | ![]() | ![]() | ![]() |

Shandong Dexuda Geotextile Material Co., Ltd. ( DXD ) is located in China geosynthetic materials production base (approved in September 2007), Lingcheng Area, Dezhou City, Shandong Province, the hometown of Dongfang Shuo, a great writer of the Western Han Dynasty.
With a total investment of 120 million yuan and a registered capital of 50.7 million yuan, the company has 120 employees, including more than 35 professional and technical personnel, and it is a state-recognized backbone enterprise of geosynthetic materials production base integrating production, sales, technical design and construction services of new geosynthetic materials.
DXD has always been to "cast a hundred years of enterprises, create immortal brand" as the business philosophy of the enterprise, depending on quality, credit as the life of the enterprise. The main production equipments are all imported by domestic and international well-known enterprises.
Company business scope: manufacturing, sales and construction of geotextile, filament geotextile, woven geotextile, exhibition carpet, geomembrane, composite geomembrane, waterproof plate, GCL bentonite waterproof blanket, geogrid, geocell, geomat, water stop belt, water stop strip, PE film, three-dimensional earth consolidation mat, bridge support, expansion joint, building waterproof roll. They form an environmental friendly seepage prevention, protection, reinforcement, water stop four material system integration supply.

DXD has a complete and scientific management system. It has passed the ISO9001 Quality Management System Certification, ISO14001 Environmental Management System Certification, ISO18001 Occupational Health and Safety Management System Certification. And by the State General Administration of Quality Supervision and Quarantine issued the national industrial product production license.
DXD uses the domestic advanced production technology and equipment process. All products are produced by international or national standards, and have perfect testing method and precision testing equipment to always maintain the excellent performance of products. The quality of all products produced by the company has reached or exceeded international or national standards, and the products are widely used in various fields such as highways, railways, tunnels, canals, dams, artificial lakes, airports, seaports, environmental sewage treatment, landfill, ash field, mining, agriculture and animal husbandry, anti-seepage engineering, reinforcement engineering, reinforcement engineering and so on.
DXD has a group of sophisticated technology, experienced market service team. They have many years of experience in the industry, for several years has always served at home and abroad large-scale engineering construction sites, to provide our customers with 24 hours of full service and product technical guidance. The company has gradually established offices in key large and medium-sized cities across the country, engaged in material consulting, project follow-up, construction design, marketing management and other services.
The company's credibility, strength and product quality have been highly recognized by more and more project owners and engineering parties.

ENTERPRISE HONOR
1. Where is your company located?
Economic Development Zone, Ling County, Dezhou City, Shandong Province. China.
2. Can you send samples to us?
Yes, free samples could be provided, but customer need pay for the freight cost.
After order placed , the freight charge could be refund.
3. What's your MOQ quantity?
MOQ is 3000sqm. The quantity could be negotiable.
4. What's your payment term?
T/T, L/C, Western Union, etc.
5. What is the delivery term?
Within 10 days after receiving the deposit or L/C.
6. What's your delivery method?
By sea , By train , By ari, depend on your country.
7. What is the raw materials?
The raw materials must be 100% virgin, UV resistance.
The lifetime will be more than 20 years at least.
We suggest customers kindly do not purchase recycled raw materials, otherwise, the lifetime will be very short.
We know that no customers are easy, so we should have the responsibility to provide the best quality products.
8. Do you manufactur other geosynthetics products except HDPE geomembrane?
Yes, our factory aslo manufactures and exports LDPE/LLDPE geomembrane, PP nonwoven geotextile, PET nonwoven geotextile, PP woven geotextile, Geosynthetic Clay Liner(GCL), Geogrid, Geobag, Geocomposite, and so on.