When it comes to producing titanium bars, Daxun is the one you can trust.

Hot-rolled Titanium bars
Titanium bars are heated in the rolling mill and rolled through multiple passes. The specifications are complete and the performance meets the standards and requirements.
Cold-drawn bright titanium bars
Cold-drawn titanium bars are titanium bars drawn under cold working conditions. They have a smooth surface and can also be polished and ground.
Forged titanium bars
Forged titanium bars are forged multiple times to improve the mechanical properties and higher strength of the titanium bars.

Daxun Titanium rod

Daxun Alloys stocks Grade 1 Titanium Rod, Grade 2 Titanium Rod, Grade 5 Titanium Rod in various diameters to meet the specific needs of your project, from general industrial to military aerospace applications. We stock Titanium Alloy Rods in sizes from 1mm diameter to 300mm diameter and accept custom orders for larger sizes, please contact Daxun for a quote. Titanium Rods are certified to ASTM B348 and ASTM B381. Feel free to contact Daxun to purchase. We offer high quality pure titanium rods and titanium alloy rods, and we will be happy to advise you if you have any questions.

Daxun has a complete technology cycle: from raw material processing to the production of finished products with a high degree of mechanical processing.Bar product is stocked throughout our service center network to allow for fast, off-the-shelf delivery of common sizes and alloys.We also manufacture custom sizes and can arrange for stocking programs for quick turnaround on a just-in-time basis for quantities of less than mill minimum.

Daxun's titanium rod manufacturing capabilities

Daxun's forming capabilities include state-of-the-art radial forging machines, heat treatment furnaces, melting furnaces and rolling mills for manufacturing titanium bars, and a unique hydroforming process for manufacturing parts.

Daxun's titanium alloy bars and titanium rod heat treatment adopts advanced heat treatment furnace equipment to ensure the stability and high performance of the material. Daxun makes it a reliable

Daxun titanium rods are smelted using the world's most advanced electron beam cooling furnace to reduce impurities during the smelting process and improve the performance of the finished titanium rods.

About the chemical composition of(Ti 6AL-4V) grade 5 Titanium rods

About the chemical composition of grade 2 Titanium rods

About the mechanical properties of grade 2 Titanium rods

Detailed Introduction of Grade 5 Titanium Rod and Grade 2 Titanium Rod
 

Grade 5 Titanium Rod

Daxun has a state-of-the-art production facility in China that produces highly competitive, high-precision Grade 5 titanium bars. Excellent surface, tolerance, straightness and material quality provide you with technological leadership and consistent production processes. These advantages apply to a wide range of diameters and materials. In addition, our comprehensive stock program at our service center enables just-in-time delivery.

SPECIFICATIONS

AMS 4928 - Bars, Forgings, and Forging Stock (Annealed)

AMS 4965 - Bars, Forgings (Solution treated and aged)

AMS 4967 - Bars, Forgings (Annealed, Heat Treatable)

HEAT TREATMENT

• When high hardness, tensile strength, and fatigue strength are required, annealing can be performed at 1,700-1,900°F (927 - 1,038°C).
  DAXUN 6-4™ Grade 5 alloy can be heat treated in a variety of ways.
• 1. Anneal: 1,275 -1,400°F; (691 - 760°C), ½ to 2 hours, air or furnace cool
• 2. Stress Relief Anneal: 1,000 -1,200°F; (538 - 649°C), 1 to 8 hours, air or furnace cool
• 3. Solution Heat Treat: 1,675 -1,750°F; (913 - 954°C), 1 hour, water quench
• 4. Aging: 975 -1,025°F; (524 - 552°C), 4 to 8 hours - air cool

In the solution treated and aged condition, rapid quenching of small sections yields optimum properties. Larger section sizes and/or delayed quenching may result in less than optimum properties.

HARDNESS

Typical hardness in the annealed condition is Rockwell C 30-34, and about Rockwell C 35-39 in the solution and aged condition.

Forgeability/Formability

• Ti-6Al-4V, Grade 5 alloy bar is forged at 1,750°F; (954°C) with a final forging temperature of 1,450°F; (788°C). A minimum of 35% reduction is recommended for optimum properties.
• Ti-6Al-4V, Grade 5 alloy bar is difficult to form at room temperature, even in the annealed condition. Therefore, severe forming operations such as bending or stretching can be performed on annealed material at temperatures up to 1,200°F; (649°C) without affecting mechanical properties. Hot sizing or forming can be accomplished by creep forming in the range of 1,000 - 1,200°F; (538 - 649°C).

Machinability

Ti-6Al-4V, Grade 5 alloy bar can be machined using austenitic stainless steel machining methods with slow machining speeds, high feeds, rigid tools, and the use of large amounts of non-chlorinated cutting fluids.

Weldability

Ti-6Al-4V, Grade 5 alloy rod is readily weldable in the annealed condition or in the solution and partially aged condition, with aging being accomplished during post weld heat treatment. Precautions must be taken to prevent contamination with oxygen, nitrogen, and hydrogen. Fusion welding may be performed in an inert gas filled chamber or with inert gas to weld the molten metal and adjacent heated zones, with a tail shield. Spot, seam, and flash welding may be performed without the aid of a protective atmosphere.

Special Considerations

Ti-6Al-4V, Grade 5 titanium alloy rod may be contaminated with hydrogen from improper pickling, and with oxygen, nitrogen, and carbon during forging, heat treating, brazing, etc. This contamination may result in a loss of ductility, which may adversely affect notch sensitivity and forming characteristics.

Size range

• Grade 1 Titanium Bar Dimensions
• Ø 0,7 - 30 mm (drawn, ground)
• Ø 16 - 400 mm (hot rolled, peeled)
• h11-h5 possible
• Tighter or different tolerances available on request
• Lengths up to 9,000 mm long, depending on diameter
• For larger diameters, other bar lengths and tolerances can be agreed upon request

Availability Grade 5 Titanium rods

• Drawing, straightening
• Drawing, straightening, polishing
• Drawing, grinding, polishing
• Drawing, straightening, grinding, polishing
• Drawing, annealing, straightening
• Drawing, annealing, polishing
• Drawing, annealing, grinding, polishing
• Drawing, annealing, straightening, grinding, polishing

Processing

We produce bars according to your requirements.

Excellent surface and straightness, perfect roundness and tightest diameter tolerances (according to ISO 286-2 up to h5). Available in straightened, ground, polished conditions.

Sawing

Band saws (up to Ø510 mm)
Bench band saws (up to 6,000 x 3,000 x 400 mm)
High-performance sawing machines for precise sawing

Titanium Bar end machining

Single or double sided
Chamfer 90° (45°)
Point 60° (30°)
Flat end
Centered

Delivery form

ASTM American Society for Testing and Materials Standards
AMS American Aerospace Materials Standards
NACE American Association of Corrosion Engineers International Standards
ASME American Society of Mechanical Engineers Standards
GB Chinese National Standards
GJB Chinese National Military Standards
ISO International Standards
DIN German Standards
EN European Standards
API American Petroleum Institute Standards

Detection method

Non-destructive testing > 100% testing

Testing methods
Eddy current testing/eddy current crack testing
Defect-free surface (level 4)
Flat bottom hole diameter 0.7 mm and 0.4 mm
Blind area can be cut off according to fixed length >Test to the end of the bar
Full diameter ultrasonic testing

Our Titanium Bar Material Services

• As an experienced service center, we can tailor your titanium bar material to your specifications, work with various certification bodies such as TÜV Rheinland or DNV to approve the specifications, and initiate the upgrading of titanium semi-finished products to meet appropriate applications.
• We will be happy to provide you with a consultation and explain everything you need to know about obtaining titanium bar material, including which standards require greater attention for the components to be manufactured.
• If you have a long-term supply commitment, you can establish a framework agreement with Daxun. We guarantee prices and quantities for a specified period.
• Benefit from our extensive experience in the global market. We have been helping businesses around the world since 2003. If you need any additional information about Grade 2 Titanium Bar, our professionals will be happy to help you. We look forward to hearing from you.

Ordering Information

Purchase orders should include quantity, grade, type or category, API5L reference, thickness, width, length, and any applicable attachments or additional requirements related to chemical composition, mechanical properties, heat treatment, additional testing, manufacturing process, surface coating or end finish. Contact Daxun now, we will reply to your email as soon as possible.

Grade 2 Titanium Rod

Corrosion resistance

Titanium should not be used with strong reducing acids, fluoride solutions, pure oxygen, or anhydrous chlorine.

General corrosion

The general corrosion rates for Grade 2 titanium in a variety of media are shown in Table 1. CP titanium exhibits good corrosion resistance to a wide variety of environments including:

• Seawater and brines
• Inorganic salts
• Moist chlorine gas
• Alkaline solutions
• Oxidizing acids
• Organics and organic acids
• Sulfur compounds

Crevice corrosion

CP titanium exhibits good resistance to crevice corrosion in salt solutions compared to stainless steels. CP titanium will not exhibit crevice corrosion at temperatures under 80 °C ( 176°F) regardless of pH, even under super chlorinated conditions.

Stress corrosion cracking

Grade 2 titanium shows excellent resistance to stress corrosion (SCC) cracking in hot chloride solutions and is immune to sec in seawater.

Erosion corrosion

Titanium shows excellent resistance to erosion in flowing
seawater with velocities up to 130 ft/sec ( 40 m/sec) showing negligible effect on the material. The presence of abrasive particles, such as sand, has only a small effect on corrosion.

Hydrogen embrittlement

There is no significant absorption of hydrogen into titanium exposed to seawater, even at higher temperatures. Normally hydrogen absorption occurs only when the three following conditions are met:

1. pH is < 3 or > 12
2. Temperature is above l 76F (80C)
3. A mechanism exists for hydrogen generation such as a galvanic couple or impressed current.

Bio-corrosion

Titanium alloys have demonstrated a unique immunity to all forms of microbiologically influenced corrosion. Since titanium alloys do not display any toxicity toward marine organisms, biofouling can occur in seawater. This can be minimized by chlorination or by increasing the water velocity through the heat exchanger.

Corrosion fatigue

Titanium, unlike many other materials, does not show a decrease in fatigue performance in the presence of seawater. Both fatigue endurance limits and fatigue crack growth rates are the same whether tested in air or seawater.

Galvanic corrosion

In the galvanic series, titanium is towards the noble end near stainless steels, and will normally act as the cathode when coupled with other metals. The titanium will therefore not be affected by galvanic corrosion but can accelerate corrosion of the other metal. Coupling of titanium with more noble metals, such as graphite, only enhances titanium's passivity.

Fatigue Properties

Unlike many other materials, Grade 2 Titanium Rod does not show a degradation in fatigue properties in the presence of seawater. Fatigue endurance limits and fatigue crack growth rates are the same whether tested in air or seawater.

Weldability

CP2 Grade Titanium Rod is very weldable as long as the necessary precautions are taken. Due to the reactivity of titanium, an inert gas shield must be placed on both the OD and ID of the rod. The material must also be free of any grease or oil contamination.

Grade 2 Titanium Rod is typically welded using manual or automatic TIG welding, with or without filler wire. Low heat input should be used to minimize the size of the heat affected zone. Titanium Rod is not typically post weld heat treated.

Buy Grade 2 Titanium Rods/Rounds at Daxun

Do you need round rod material made of Grade 2 Titanium Alloy Rod-3,7035? At Daxun, you can buy customized titanium rods. As an experienced supplier we are ready to support your project.

We offer Grade 2 Titanium bars in diameters from 2.0 mm to 400 mm. Please note that execution and tolerances may vary. Small diameters will be delivered centerless ground with h7 tolerances, large diameters with h9 or h11 tolerances.

Buy Grade 2 Titanium Bars: Features and Specifications.

• Forged bars can be peeled or pre-machined. The material is available in a variety of specifications depending on the application and market needs.
• Our titanium bars typically meet various requirements and certifications, including ASTM B348 and ASTM F 67, DIN 17860, VD TÜV Table 230-3, and Nace MR 0175.
• Titanium round bars are often used where they have excellent corrosion resistance and good mechanical properties.
• Grade 2 titanium bars (3,7035) are therefore suitable for use as a construction material for equipment and devices, as they are easy to process.

Our Titanium Bar Material Services

• As an experienced service center, we can tailor your titanium bar material to your specifications, work with various certification bodies such as TÜV Rheinland or DNV to approve the specifications, and initiate the upgrading of titanium semi-finished products to meet appropriate applications.
• We will be happy to provide you with a consultation and explain everything you need to know about obtaining titanium bar material, including which standards require greater attention for the components to be manufactured.
• If you have a long-term supply commitment, you can establish a framework agreement with Daxun. We guarantee prices and quantities for a specified period.
• Benefit from our extensive experience in the global market. We have been helping businesses around the world since 2003. If you need any additional information about Grade 2 Titanium Bar, our professionals will be happy to help you. We look forward to hearing from you.

Ordering Information

Purchase orders should include quantity, grade, type or category, API5L reference, thickness, width, length, and any applicable attachments or additional requirements related to chemical composition, mechanical properties, heat treatment, additional testing, manufacturing process, surface coating or end finish. Contact Daxun now, we will reply to your email as soon as possible.

Q1: What products can you offer?

A: We can offer you general steel types like 310S, 316L,304.304L.201,904L, 316H, 316,316L 300and 
400 series, and duplex stainless steel like 2205, 2304,2101,2507,etc. 904L, 800H, 600H high-nickel alloy.

Q2. Can you produce the products according to my own drawings?

Yes, we can produce the products according to your drawings that will be most satisfy you.

Q3. How does your factory do regarding quality control?

Quality is a priority. We always attach great importance to quality controlling from the beginning to end.

Q4. Can I request to change the form of packaging and transportation?

Yes, We can change the form of the packaging and transportation according to your request, 
but you have to bear their own costs incurred during this period and the spreads.

Q5. How does your factory do regarding quality control?

Quality is a priority. We always attach great importance to quality controlling from the beginning to end.

Q6. How long is the delivery time?

A: 7~20 working days after confirming the payment.
If the order is urgent, we will push our workshop finish in advance.

Q7. What is your Payment? 

A:  100% T/T advance, Western Union (For Small Order) 

B:  30% T/T and balance 70% before the shipment

C:  100% Irrevocable LC at sight  (For Big Order) 

Q8: Can you make DDQ ( Deep Drawing Quality)?

A: Yes, we can. Our material can be used for stainless steel pots, stainless steel sinks, stainless steel bowls etc. U can tell us your usage, and we will adjust the mechanical propertise to meet your requirement.

Q9: How to get a sample?

A: FREE samples are available for your checking and testing.If you require for a small piece,we can afford courier cost,it depends.
 
Q10:Which country have you exported to?

A:Until now,we have exported stainless steel  material to following countries: Vietnam,Thailand,Turkey,Russia,Maroc,Korea,India,Pakistan,UAE,Ukraine and so on.

Q11: How to visit your company?

A:By flight to Guangzhou Baiyun International airport,then we will pick you up.