Audited Supplier
High Temperature Medium Frequency Aluminum Melting Furnace HGRL high frequency medium frequency furnace function features are as follows:
1. The load resonance circuit adopts series inverter design, the import main body supports, and the high frequency power supply runs statically.
2. Series inverter, rectifier without voltage regulation, power supply circuit and control loop is simple, low failure rate.
3.Constant power output, the main control board adopts digital circuit design, strong anti-interference.
1.Just tell us your own demands;
2.Designed according your requirements,send you drawing;
3.Modify a detail;
4.production according drawing;
5.Delivery on time;
6.Technical personnel guide the installation.
7.Any question we provide 24-hour service consultation.
8.Warranty for 24 months.
9.Free consultation for life
Heat storage furnace:
1. equipment use:
This furnace is mainly used for forging workpiece heating, mold shell roasting, metal heat treatment.
2. equipment composition:
The equipment is mainly composed of steel structure frame of the furnace body, high temperature refractory brick lining, furnace door, high temperature bearing stove, heat storage burner, control system.
3. equipment features:
Regenerative shell baking furnace is an efficient organic waste gas treatment equipment, its working principle is to heat the organic waste gas to more than 760 degrees Celsius, so that the volatile organic compounds (VOCs) in the waste gas oxidation decomposition into carbon dioxide and water. The heat generated by the oxidation process is stored in a special ceramic accumulator, which heats up the accumulator and "accumulates heat". The heat stored in the regenerative body is used to preheat the incoming organic waste gas, which is the "heat release" process of the ceramic regenerative body, thus saving the fuel consumption of the exhaust gas heating process.
Equipment features:
1. energy saving: the equipment shell is welded by high-quality channel steel and high-quality hot rolled steel plate, the furnace is composed of three layers of heat-resistant material, effective thickness ≥500mm, to minimize heat loss.
The special regenerative burner is used to make full use of waste heat, the furnace temperature uniformity is less than 5ºC, the smoke exhaust temperature is less than 100ºC, and the combustion efficiency is ≥95%, so as to achieve the energy saving requirements to the maximum extent.
2. environmental protection: combustion chamber poor itching combustion, oxidation burn loss is less than 1%, and reduce greenhouse gas emissions, NOx emissions less than 100ppm, and low noise.
3. high efficiency: compared with the traditional box-type baking furnace, can save more than 50% of energy, high temperature faster, shorten the roasting time.
4. safety: the equipment is equipped with automatic control system, with automatic ignition, flameout protection, tempering protection, simple operation, high safety.
Other Common type Furnace size:
| Medium frequency furnace description | Unit | HGRL-175/3 | HGRLc-200/3 | HGRL-250/3 |
|---|---|---|---|---|
| power | Kw | 175 | 200 | 250 |
| Input voltage | Vt | 380 | 380 | 380 |
| Input current | A | 265 | 340 | 380 |
| Input frequency | Hz | 50 | 50 | 50 |
| Output frequency | Hz | 3000 | 3000 | 3000 |
| Furnace capacity | Kg | 100 | 150 | 200 |
| Power supply size | mm | 2500×1000×1800 | 2900×1100×1800 | 2900×1100×1800 |
| Furnace size | mm | 600×650×650 | 720×720×750 | 850×800×800 |
| Melting time | min | 18~25 | 18~25 | 18~25 |
| Furnace number | 2 | 2 | 2 | |
| Weight | Kg | 1500 | 1700 | 1900 |
Shandong Runhai Machinery Technology Co., Ltd. registered capital of 10 million, the existing staff of 25 people, technical personnel 6 people, the factory covers an area of 3200 square meters, the annual production capacity of 50 million yuan, located in Weifang City, Shandong Province, the products involved in steel and metallurgy, aerospace, military medical, automotive and other fields.The company actively carries out the development of scientific research projects, and introduces and absorbs the advanced technology of European and American countries, has accumulated rich experience in design and manufacturing, and has trained a strong technical research and development team and after-sales service guarantee team. The company's products are exported to Australia, Russia, Mexico, Hungary, Turkey, India, Malaysia, Indonesia, Thailand, Morocco nearly 20 countries and regions, has been praised by domestic and foreign customers.
The company's main products are: truck annealing furnace, forklift quenching furnace, tempering furnace, carburizing furnace, nitriding furnace, vacuum furnace, mold shell baking furnace, medium frequency furnace, precision casting equipment, sand casting equipment, shot blasting machine, cooling tower and other products.
The company always adheres to the purpose of quality first and customer first, and is willing to meet the needs of market competition and international economic globalization with high-quality products, reliable commitment and first-class service.
