Audited Supplier
Refractory Recrystallized Sic Kiln Furniture Sanitary Ware Plate Setter Silicon Carbide Sagger for Firing
Product Introduction:
The silicon carbide saggar has a large loading capacity and stable loading,which can make full use of the space of the kiln and kiln cart,increase the output value and reduce energy consumption.The heat conduction of the product is great,and the comprehensive production capacity has been improved.
It is widely used for sinter powder and ceramic.It has very good performance in high temperature furnace.
Pictures of Product
2. Good thermal conductivity.
3.Good thermal shock stability.
4.Good wear-resistance performance.
Technical Data of Silicon Carbide Saggars
| Item | Value | |
| SiC(%) | ≥89 | |
| SiO2(%) | <9.0 | |
| Al2O3(%) | <0.8 | |
| Fe2O3(%) | <0.7 | |
| Bulk Density(g/cm3) | ≥2.75 | |
| Apparent Porosity(%) | <12.0 | |
| Modulus of Rapture(kg/cm2) | Room Temperature | 400 |
| 1200ºC | 500 | |
| Compressive Strength(kg/cm2) | 1450 | |
| Thermal Expansion(RT-1000ºC) | 4.8*10-6 | |
| Thermal Conductivity at 1200ºC(Kcal/m.hr.ºC) | 13.8 | |
| Refractoriness under Load T2(3kg/cm2) | 1750 | |
Technical Data of Nitride Bonded Silicon Carbide Saggars
| Item | Unit | Typical Index |
| Max. Application Temperature | ºC | 1450 |
| Bulk Density | g/cm3 | 2.75 - 2.85 |
| Apparent Porosity | % | 13-15 |
| Compression Strength | MPa | 600-700 |
| Modulus of Rupture | MPa | 160-180( 20 ºC) |
| MPa | 170-180 (1200 ºC) | |
| MPa | 170-190( 1350 ºC) | |
| Thermal Conductivity | W/m.k | 19.6 (1200 ºC) |
| Coefficient of Thermal Expansion | K-1 X 10 -6 | 4.70 (1200 ºC) |
| Thermal Shock Resistance | / | Excellent |
| SiC | % | 75 |
| Si3N4 | % | 23 |
Company Profile
Henan Fireramo Industrial Co.,Ltd. is located in Songlou Industrial Zone, Xinmi City, Henan Province, China, which is one of the largest refractory base in China. The factory of us covers an area of 108,000 Square Meters with more than 1 billion RMB fixed assets. There are around 400 employees in our factory, including 20 board members, 10 technicians, and 4 plant managers. Fireramo is a new technology enterprise specializing in manufacturing, production, sales and consultant of refractory materials for various industry, such as, cement plants, glass factories, steel plants, chemical & oil industries.Fireramo has been established since 1998. We do both domestic and overseas business. Our products have been sold all over the world, especially to Iran, Turkey, Pakistan, Korea, UAE, Saudi Arabia, Kuwait, Syria, Qatar, Russia, etc.
Factory Equipment
R&D
Fireramo has its own engineering technology center and testing laboratories, which can meet the testing requirements for various kinds of products and raw materials, and the research and development of new products. At the meanwhile, we have a well-equipped and skilled furnace construction team that can provide users with service items such as furnace design, construction, rapid maintenance and operation technical training, etc.
Our manufacturing company includes two high alumina brick and fireclay brick production lines, two silica brick production lines, two unshaped production lines and two lightweight brick production lines. The total production capacity reaches 148,000 tons, of which the annual output of high alumina clay brick production line is 50,000 tons, the annual output of silica brick production line is 60,000 tons, the annual output of lightweight production line is 18,000 tons, and the annual output of unshaped production line is 20,000 tons.
FAQ
Q1 : Do you provide free samples?
A1 : Yes, free samples can be provided, the buyer shall bear all the delivery cost.
Q2 : How can you control your quality?
A2 : We have professional QC system for the chemical composition and Physical properties.All the products will be tested before delivery
Q3 : What is your payments terms?
A3 : We can accept 30% deposit, 70% balance to be against the BL copy or by LC, or other payment terms.
Q4 : Are you a trading company or manufacturer?
A4 : We are a manufacture and our factory was established in 1998.
Q5 : What standards can you meet?
A5 : We can meet GB, ASTM,JIS,DIN standards.
The third party test is acceptable.
