Audited Supplier
AT5010 Dual Flange Level Transmitter
Differential Pressure Transmitter
Mono-Crystalline Silicon
Fluids Compatible with Contact Material
±0.2%, ±0.1% Upper Limit
-100 Kpa to 1 MPa (Minimum Range 0 to 10 Kpa)
IP67
Sil2/3, Nace, Nepsi, Atex, CE
Customized
4 to 20 Ma + Hart 7, Modbus-RTU/RS485 and Others
2-Year/3-Year Warranty
DN50, DN80 and Other Customized Sizes
HollySys
Transported in Standard Packaging
18 cm*18 cm*25 cm
China
9026201090
Product Description
Introduction
With internationally leading monocrystalline silicon sensor technology and patented packaging process, AT5010 differential pressure remote transmitter is a high-performance pressure transmitter. The monocrystalline silicon sensor is located at the top of the metal body, away from the contact surface of the medium, to achieve mechanical isolation and thermal isolation. The sintered glass integrated sensor leads achieve high-strength electrical insulation with a metal matrix, improving the electronic circuit's flexible performance and ability to withstand transient voltage protection. The monocrystalline silicon sensor packaging technologies ensure that AT5010 differential pressure remote transmitter can handle complex chemical and mechanical loads while providing strong electromagnetic interference resistance for demanding industrial environment applications.
· SIL2/3, NACE, NEPSI, ATEX, CE
· -100 kPa to 1 MPa (minimum range 0 to 10 kPa)
· 4 to 20 mA + HART 7, Modbus-RTU/RS485 and others
· ±0.2% upper limit, ±0.1% upper limit accuracy (special tailor-made)
· Maintainable within 0.1% over a period of 10 years in the URL
· Static pressure up to 40 MPa
· Protection level: SIL2/3, Ex ia IIC T4 Ga, Ex db IIC T4...T6 Gb, IP67
· Intuitive interface and built-in buttons for quick commissioning of the device
· 316L/HC/Tantalum/316L coated with PTFE/316 L gold plated
· Multiple standard process connections, as well as filler fluids, enabling connection to various forms of piping
· Combination of more complex level and volume flow measurements possible
· Convenient and user-friendly, wide options in forms and material
· Isolation diaphragms with the unique design, featuring anti-overloading
· -100 kPa to 1 MPa (minimum range 0 to 10 kPa)
· 4 to 20 mA + HART 7, Modbus-RTU/RS485 and others
· ±0.2% upper limit, ±0.1% upper limit accuracy (special tailor-made)
· Maintainable within 0.1% over a period of 10 years in the URL
· Static pressure up to 40 MPa
· Protection level: SIL2/3, Ex ia IIC T4 Ga, Ex db IIC T4...T6 Gb, IP67
· Intuitive interface and built-in buttons for quick commissioning of the device
· 316L/HC/Tantalum/316L coated with PTFE/316 L gold plated
· Multiple standard process connections, as well as filler fluids, enabling connection to various forms of piping
· Combination of more complex level and volume flow measurements possible
· Convenient and user-friendly, wide options in forms and material
· Isolation diaphragms with the unique design, featuring anti-overloading
· Intelligent diagnosis, self-diagnosis, sensor diagnosis, and process variable diagnosis
· Electrical interface titled down by 10°, which can effectively avoid water inflow caused by improper installation
· Innovative calibration algorithm, which guarantees accurate measurement of a sensor in a wide temperature range
Applications
Pressure, level, differential pressure, density, interface and flow rate
Product Images
Technical Specifications
Applications
Pressure, level, differential pressure, density, interface and flow rate
Product Images
DN50 Dual Flange Level Transmitter
DN80 Dual Flange Level Transmitter
Packaging & Delivery
| Parameter Class | Specification Code | Clarification |
| AT5010 | DN50 dual flange liquid level transmitter (accuracy ±0.2% FS) | |
| Type | YDP | Monocrystalline silicon sensor (gauge pressure -100 kPa to 1 MPa, minimum range 0 10 kPa) |
| Range | 3 | 0 to 40 kPa |
| 4 | 0 to 250 kPa | |
| 5 | 0 to 1 MPa | |
| Sealing method | W | Stainless steel welded seals |
| Electrical connection & housing | 0 | Aluminum housing, polyurethane coating, female thread 1/2 NPT |
| 0 | Aluminum housing, polyurethane coating, female thread M20 x 1.5 | |
| 0 | SUS316 stainless steel housing, female thread 1/2 NPT | |
| 0 | SUS316 stainless steel housing, female thread M20 x 1.5 | |
| Output signal | ST | 24 V DC loop power supply, 4 to 20 mA, HART 7, two-wire |
| R | Modbus RTU, four-wire, 24 V DC loop power supply | |
| Display mode | MO | Without display |
| M5 | LCD with backlight display module physical buttons and magnetic bar | |
| Connection | /HL | Connection of high and low pressure end (same parameters for high and low pressure end/L option not selected) |
| location | /H | High pressure end connection (optional If the parameters of the high and low pressure end do not coincide) |
| Connection type | C | Capillary tapping |
| Capillary type | P | PVC sheath and armored SUS304 stainless steel |
| H-end capillary | 0 | Capillary-free |
| 1 | 1 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 2 | 2 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 3 | 3 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 4 | 4 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 5 | 5 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 6 | 6 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 7 | 7 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 8 | 8 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 9 | 9 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 10 | 10 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| Isolation fluid | S | Normal temperature sillcone oil, temperature range -40 to 205°C |
| H | High temperature silicone oil, temperature range 0 to 315°C | |
| Process flange | S4 | Stainless steel SUS304 |
| S6 | Stainless steel SUS316 | |
| Isolation diaphragm | A | SUS316L stainless steel |
| C | Tantalum (316 for process connections) | |
| P | SUS316 and PTFE coating (range > 50 kPa) | |
| H | Hastelloy C-276 (SS316 for process connections) | |
| G | 316L gold plated | |
| Process connection | H20 | HG/T 20592-2009 DN50 RF, PN10 to PN40 |
| H21 | HG/T 20592-2009 DN50 RF, PN54 | |
| H22 | HG/T 20592-2009 DN50 RF, PN100 | |
| X | For other connection specifications, please consult the factory. | |
| Insert tube | D0 | No insert tube |
| D505 | OD 46 mm, length 50 mm | |
| D510 | OD 46 mm, length 100 mm | |
| D515 | OD 46 mm, length 150 mm | |
| Connection location | /L | Low pressure end connection (if the parameters of the high and low pressure end are the same, /L option not selected, default provided) |
| Connection type | C | Capillary tapping |
| Capillary type | P | PVC sheath and armored SUS304 stainless steel |
| L-end capillary | 0 | Capillary-free |
| 1 | 1 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 2 | 2 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 3 | 3 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 4 | 4 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 5 | 5 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 6 | 6 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 7 | 7 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 8 | 8 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 9 | 9 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 10 | 10 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| Isolation fluid | S | Normal temperature silicone oil, temperature range -40 to 205°C |
| H | High temperature silicone oil, temperature range 0 to 315°C | |
| stainless steel | S4 | SUS304 stainless steel |
| S6 | SUS316 stainless steel | |
| Isolation diaphragm material | A | SUS316L stainless steel |
| C | Tantalum (316 for process connections) | |
| P | SUS316 and PTFE coating (range > 50 kPa) | |
| H | Hastelloy C-276 (316 for process connections) | |
| G | 316L gold plated | |
| Process connection | H20 | HG/T 20592-2009 DN50 RE, PNtO to PN40 |
| H21 | HG/T 20592-2009 DN50 RF, PN64 | |
| H22 | HG/T 20592-2009 DN50 RF, PN100 | |
| X | For other connection specifications, please consult the factory. | |
| Insert tube | D0 | No insert tube |
| D505 | OD 46 mm, length 50 mm | |
| D510 | OD 46 mm, length 100 mm | |
| D515 | OD 46 mm, length 150 mm | |
| Mounting bracket | -B0I | Bend bracket mounted in 2" fixed pipe with install components and fasteners, carbon steel |
| -B02 | Bend bracket mounted in backboard with install components and fasteners,, carbon steel | |
| -B03 | Flat bracket mounted In 2" fixed pipe with install components and fasteners, carbon steel | |
| -B14 | Bend bracket mounted in 2" fixed pipe with install components and fasteners, SUS304 stainless steel | |
| -B34 | Flat bracket mounted in 2" fixed pipe with install components and fasteners, SUS304 stainless steel | |
| Anti-explosion | d | ExdbllCT6, NEPSI |
| i | ExlallCT4, NEPSI | |
| NA | Unavailable | |
| Special treatment | T | Degreasing (removing oil and grease from product surface) |
| NA | Unavailable | |
| Extended warranty | 2W | 2-year warranty |
| 3W | 3-year warranty | |
| Flushing ring | R50 | DN50, 316 stainless steel, clamping type |
| Subsidiary requirements | EN | English stainless steel nameplate and stainless steel anti-explosion cable gland |
| Special certifications | SIL | SIL |
| Ad | ATEX Exd | |
| Ai | ATEX Exia | |
| CE | Certificate of Compliance | |
| Id | IEC Exd | |
| li | IEC Exia | |
| Alarm output | HH | NAMUR NE43 analog output, high alarm, 20.8 mA |
| LL | NAMUR NE43 analog output, low alarm, 3.8 mA | |
| NA | Unavailable |
DN80 Dual Flange Level Transmitter
| Parameter Class | Specification Code | Clarification |
| AT5010 | DN80 dual flange liquid level transmitter (accuracy ±0.2% FS) | |
| Sensor type | YDP | Monocrystalline silicon sensor (gauge pressure -100 kPa to 1 MPa, minimum range 0 to 10 kPa) |
Measurement range | 3 | 0 to 40 kPa |
| 4 | 0 to 250 kPa | |
| 5 | 0 to 1 MPa | |
| Sealing method | W | Stainless steel welded seals |
Electrical connection | -E1 | Aluminum housing, polyurethane coating, female thread 1/2 NPT cable entry |
| -E2 | Aluminum housing, polyurethane coating, female thread M20 x T5 cable entry | |
| -E3 | SUS316 stainless steel housing, female thread 1/2 NPT cable entry | |
| -E4 | SUS316 stainless steel housing, female thread M20 x 1.5 cable entry | |
| Output signal | S7 | 24 V DC loop power supply, 4 to 20 mA, HART 7, two-wire |
| R | Modbus RTU, four-wire, 24 V DC loop power supply | |
| Display mode | M0 | Without display |
| M5 | LCD with backlight display module, physical buttons and magnetic bar | |
| Connection location | /HL | Connection of high and low pressure end (same parameters for high and low pressure end/L option not selected) |
| /H | High voltage terminal connection (optional if the parameters of the high and low voltage terminals do not coincide) | |
| Connection type | C | Capillary tapping |
| Capillary type | P | PVC sheath and armored SUS304 stainless steel |
| H-end capillary length | 00 | Capillary-free |
| 01 | 1 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 02 | 2 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 03 | 3 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 04 | 4 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 05 | 5 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 06 | 6 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 07 | 7 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 08 | 8 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 09 | 9 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 10 | 10 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| Isolated fluid | S | Normal temperature silicone oil, temperature range -40 to 205°C |
| H | High temperature silicone oil, temperature range 0 to 315°C | |
| Process flange | S4 | SUS304 stainless steel |
| S6 | SUS316 stainless steel | |
| Isolation diaphragm | A | SUS316L stainless steelmm |
| C | Tantalum (SS316 for process connections) | |
| P | SUS316 and PTFE coating (range > 50 kPa) | |
| H | Hastelloy C-276 (SS316 for process connections) | |
| G | 316L gold plated | |
| Process connection | H30 | HG/T 20592-2009 DN80 RF, PN10 |
| H31 | HG/T 20592-2009 DN80 RF, PN16 | |
| H32 | HG/T 20592-2009 DN80 RF, PN40 | |
| H33 | HG/T 20592-2009 DN80 RF, PN64 | |
| X | Other connection specifications,please consult the factory | |
| Insert tube | D0 | No Insert tube |
| D805 | OD 66 mm, length 50 mm (for DN80 flange) | |
| D810 | OD 66 mm, length 100 mm (for DN80 flange) | |
| D815 | OD 66 mm, length 150 mm (for DN80 flange) | |
| Connection location | /L | Low pressure end connection (if the parameters of the high and low pressure end are the same, /L option not selected, default provided) |
| Connection type | C | Capillary tapping |
| Capillary type | P | PVC sheath and armored SUS304 stainless steel |
| L-end capillary | 0 | Capillary-free |
| 1 | 1 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 2 | 2 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 3 | 3 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 4 | 4 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 5 | 5 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 6 | 6 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 7 | 7 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 8 | 8 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 9 | 9 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| 10 | 10 m capillary tube, PVC sheath and armored SUS304 stainless steel | |
| Isolation fluid | S | Normal temperature silicone oil, temperature range -40 to 205°C |
| H | High temperature silicone oil, temperature range 0 to 315°C | |
| Process flange | S4 | SUS304 stainless steel |
| S6 | SUS316 stainless steel | |
| Isolation diaphragm | A | SUS316L stainless steel |
| C | Tantalum (316 for process connections) | |
| P | SUS316 and PTFE coating (range > 50 kPa) | |
| H | Hastelloy C-276 (316 for process connections) | |
| G | 316L gold plated | |
| Process connection | H30 | HG/T 20592-2009 DN80 RF, PN10 |
| H31 | HG/T 20592-2009 DN80 RF, PN16 | |
| H32 | HG/T 20592-2009 DN80 RF, PN40 | |
| H33 | HG/T 20592-2009 DN80 RF, PN64 | |
| X | Other connection specifications, please consult the factory | |
| Insert tube | D0 | No insert tube |
| D805 | OD 66 mm, length 50 mm (for DN80 flange) | |
| D810 | IOD 66 mm, length 100 mm (for DN80 flange) | |
| D815 | OD 66 mm, length 150 mm (for DN80 flange) | |
| Mounting bracket | -B01 | Bend bracket mounted in 2" fixed pipe with install components and fasteners, carbon steel |
| -B02 | Bend bracket mounted in backboard with Install components and fasteners,, carbon steel | |
| -B03 | Flat bracket mounted in 2" fixed pipe with install components and fasteners, carbon steel | |
| -B14 | Bend bracket mounted in 2" fixed pipe with install components and fasteners, SUS304 stainless steel | |
| -B34 | Flat bracket mounted in 2" fixed pipe with install components and fasteners, SUS304 stainless steel | |
| Anti-explosion | d | ExdllCT6, NEPSI |
| i | ExiallCT4, NEPSI | |
| NA | Unavailable | |
| Special treatment | T | Degreasing (removing oil and grease from product surface) |
| NA | Unavailable | |
| Extended warranty | 2W | 2-year warranty |
| 3W | 3-year warranty | |
| Flushing ring | R80 | DN80, 316 stainless steel, clamping type |
| Subsidiary requirements | EN | English stainless steel nameplate and stainless steel anti-explosion cable gland |
| Special certifications | SIL | SIL |
| Ad | ATEX Exd | |
| Ai | ATEX Exla | |
| CE | Certificate of Compliance | |
| Id | IEC Exd | |
| li | IEC Exia | |
| Alarm output | HH | NAMUR NE43 analog output, high alarm, 20.8 mA |
| LL | NAMUR NE43 analog output, low alarm, 3.8 mA | |
| NA | Unavailable |
| Category | Product Size | International Commercial Terms (Incoterms) | Terms of Payment | Nearest Port |
| AT5010 DN50 Dual Falnge Level Transmitter | 18 cm*18 cm*25 cm | CIF, CFR, DAP | LC, T/T, D/P | Shanghai, Guangzhou, Tianjin |
| AT5010 DN80 Dual Falnge Level Transmitter | 18 cm*18 cm*25 cm | CIF, CFR, DAP | LC, T/T, D/P | Shanghai, Guangzhou, Tianjin |
Related Products
AT5010 Differenrial Pressure Transmitter
AT5010 Single Flange Level Transmitter
AT5020 Pressure Transmitter
AT5020 Single Flange Pressure Transmitter
AT4500S Sanitary Pressure Transmitter
Company Profile
