Audited Supplier
Innovative Features:
- Calibration range accuracy up to 0.05%, with 0.04% optional
- Stability: 0.020% of span, maintained for 10 years
- Automatic static pressure and temperature compensation
- Range ratio of 100:1
- Fast response time of up to 100 ms
- Easy-to-use and intuitive display functions
- External zero, span, and configuration functions
- Comprehensive self-diagnostics
- Integrated dual-seal design based on ANSI/NFPA 70-202 and ANSI/ISA 12.27.0 standards to ensure maximum safety
- Exceptional static pressure tolerance: 31.5 MPa
- Standard configuration fully meets SIL2/3 requirements
- Modular design
- Extendable warranty up to an additional 4 years
Note: All data provided by Honeywell laboratories
Description:
The SmartLine® series pressure transmitters are designed based on high-performance sensors. Each sensor effectively integrates multiple sensors, combining process pressure measurement with static pressure (for DP models) and temperature measurement used for temperature compensation, thereby achieving superior overall performance.
Display Head Options
Standard LCD Display Head:
- Modular (can be added or removed on-site)
- Supports HART protocol
- Adjustable to 0°, 90°, 180°, and 270° positions
- Measurement units include: Pa, kPa, MPa, kg/cm², Torr, ATM, i4H2O, mH2O, bar, mbar, inH2O, inHg, FT H2O, mmH2O, mmHg, and psi
- Large screen display (9.95 mm high x 4.20 mm wide) with 2 lines and 8 characters
- Square root output and write protection indicator
- Display module features internal configuration buttons for setting and calibrating the transmitter via internal or external keys
Self-Diagnostics:
SmartLine® transmitters all offer digitally accessible diagnostics, which help provide advanced alarms for potential fault events. This significantly reduces planned downtime and lowers overall operating costs.
Configuration Tools
Integrated Internal or External Configuration Button Options:
Transmitters can be configured for all basic parameters using buttons integrated within the display module or external magnetic keys. The integrated external buttons meet all electrical and environmental requirements. For zero/span setting functions, external buttons can be used regardless of whether an LCD display head is selected.
Handheld Configuration:
SmartLine® transmitters support bidirectional communication and configuration between the operator and the transmitter. This is achieved through Honeywell's field configuration toolkit. Honeywell's field configuration toolkit allows for the on-site configuration of HART transmitters and can be used in intrinsically safe environments. All Honeywell transmitters are designed and tested to comply with the provided communication protocols and can be used with any certified handheld configurator.
Computer Configuration:
HART Field Device Manager (FDM) software and FDM Express can be used to manage the configuration of devices.
System Integration:
- SmartLine® communication protocols comply with the latest HART standards.
- All SmartLine® transmitter devices have been tested with Experion®, ensuring high compatibility.
Modular Design:
To help control maintenance and inventory costs, all ST700 transmitters feature a modular design, allowing for easy hardware replacements such as adding an LCD display head, replacing electronic modules, or even changing the transmitter diaphragm, without affecting overall performance or equipment safety certification. Each transmitter diaphragm is uniquely characterized and calibrated to provide exceptional performance across a wide range of static pressures and temperatures. Additionally, with Honeywell's modular interface design, electronic modules can be interchanged without compromising performance specifications.
- Diaphragm Replacement
- Addable or Removable LCD Display Head*
- Replaceable Surge Protection Module (Terminals)*
*Except in explosion-proof environments, on-site replacements can be performed in any electrical environment (including intrinsically safe areas) without violating safety certification regulations.
Honeywell's innovative modular design reduces inventory requirements and maintenance costs without affecting transmitter performance.
Performance Under Rated Conditions
| Parameters | Description |
| Analog Output Digital Communication | Two-wire, 4mA ~ 20 mA. HART 7 protocol |
| Fault Output Mode (Configurable) | Honeywell Standard NAMUR NE 43 Specification Normal range: 3.8 -20.8 mA 3.8 -20.5 mA Fault Mode: ≤ 3.6 mA and ≥ 21.0 mA ≤ 3.6 mA and ≥ 21.0 mA |
| Supply Voltage Effect | 0.005% span per volt |
| Transmitter on time (including power and self-test procedure) | 2.5s |
response time (Delay + time constant) | 100ms |
Damping time constants | Adjust in 0s to 32s,Increments of 0.1 seconds.Windows default:0.50s |
Vibration effect | Less than ± 0.1% above the range limit (no damping) Compliance with IEC 60770-1, site or pipeline requirements,High vibration level (10- 2000Hz: 0.21mm shift / 3g maximum acceleration |
Electromagnetic compatibility | Compliance with the IEC 61326-3-1 requirements |
Lightning protection options | Leakage current: max. 10 uA @ 42.4 VDC 93C Impact rating:8/20 uS 5000 A (> 10 impacts) 10000 A (minimum 1 impact) 10/1000 uS 200 A (> 300, secondary impact) |
Parameter | Description |
Membrane material | 316L SS ,Hastelloy®C -2762,Monel®4003 , Ta3 |
Process interface material | 316 SS4 , Carbon steel (galvanized)5, Hastelloy C -2766, Monel 4003 |
Exhaust / drain valve, and the plug1 | 316 SS4,Hastelloy C -2762 |
Sheet gasket | Standard equipped with glass-filled PTFE. Viton®And graphite optional. |
Table body bolt | Standard with carbon steel (galvanized). Options include 316 SS, NACE A 286 SS, Monel K 500, Super dual-phase steel and B 7M. |
Optional adapters and bolts | The conversion joint material includes 316 SS, Hastelloy®C-276. The bolt material of the conversion joint depends on the bolt material of the process interface clamp block. The standard converter O-ring material is made of glass-filled PTFE, Viton®And graphite optional. |
mounting bracket | Plate or straight, angle, carbon steel (galvanized), 304SS, or 316SS. |
Filler | DC®200 (silicone oil) or CTFE (fluorine oil) |
hull | Pure polyester powder coated low copper (<0.4%) aluminum alloy, complying with NEMA 4X, IP66 / IP67 and NEMA 7 (explosion-proof). Stainless steel casing is optional. |
install | Installation is possible almost anywhere using a standard mounting bracket. The bracket is designed to be mounted over 2 inch (50 mm) vertical or horizontal piping. See Figure 3. |
procedural interface | 1 / 4 "-NPT or 1 / 2" -NPT (meet DIN requirements). |
lead | Accept the max 16 AWG (1.5 mm diameter). |
size | See Figure 3. |
net weight | 3.8 Kg (with aluminum alloy enclosure) |
https://bnsens.en.made-in-china.com/
BNSENS (Nanjing) Sensor Technology Co., Ltd. is located in Nanjing, China. It is a high-tech enterprise specializing in the development, manufacturing and trade of sensor products. The company has brought together a group of outstanding technical experts in various fields such as automation, electronics, machinery and computers. All employees of the company have college degrees or above. It adopts the world-class management and operation model and 6 sigma quality system. At present, the company's main products are pressure, liquid level, flow, current, switches, etc. The company's users are all over the country, and some products have been exported to Japan, South Korea and Southeast Asia.
Since its inception, the company has been based on the technical accumulation and management standards of American sensor giants. It is composed of senior engineers and managers who have served in multinational companies for many years, and has rapidly developed various pressure sensors, transmitters, liquid level, flow meters, pressure switches, digital meters, current sensors, proximity switches and other products. After years of unremitting efforts, it has become one of the leading suppliers in the domestic automation industry. Our pressure transmitters can achieve an accuracy of more than 3/10, 000. The products have been widely used in oil, natural gas, electricity, chemical industry, metallurgy, building materials, food, light industry, environmental protection, aerospace, tap water, municipal and other industries.
It is a sensor science and technology innovation company that masters the core technology of MEMS chips. The company has a research and development center in Minnesota, USA. The leader is Dr. Pan Hanjin, a famous scientist in the sensor industry. Dr. Pan Hanjin has been deeply involved in the sensor industry for more than 20 years and is an expert in the sensor industry.
The company has a number of ASIC chips independently developed, which are widely used in industrial, automotive, home appliance and other markets.
BNSENS (Nanjing) Sensing Technology Co., Ltd. is a strategic partner of Honeywell in China. The two parties proposed a plan of East serving East and jointly developed several sensors specifically for the Chinese market. These sensors will be widely used in intelligent manufacturing, Internet of Things, artificial intelligence, and smart home fields. These sensors include: Magnetic sensors, temperature sensors, humidity sensors, force sensors, fire water pressure sensors, equipment vibration sensors, human body status monitoring sensors, motion sensors, etc.
History of BNSENS Company:
BNSENS is a company focusing on sensors, instruments, and electronic components. We are a young company, founded in 1999, just 25 years old, and we are still growing.
1999: The company's first pressure sensor was launched, mainly for the petroleum and petrochemical industries.
2002: The company expanded its product line and launched temperature sensors
2005: Started producing high-precision pressure sensors for the test and measurement market
2006: Became an official authorized agent of Honeywell
2009: Introduced the Six Sigma management system, and the product qualification rate was greatly improved
2010: Became a supplier of Emerson
2011: We started selling SICK sensors
2014: Introduced the sensor production line from Germany, developed more industrial control sensors, and cooperated with TSMC
2015: Cooperated with Siemens in Vietnam
2017: The factory moved to Nanjing High-tech Zone
2019: Became a national high-tech enterprise in China
2023: We started selling products from Infineon and Rohm
BNSENS, The Future Starts Here.
