Hot Air Circulation Drying Oven, High-Temperature Industrial Oven

1. Product information
Inner diameter size: customized
Furnace inner wall material: t1.0mm galvanized sheet
Furnace outer wall material: t1.0mm profiled plate
Insulation layer thickness: 100mm insulated rock wool
One rail car, welded with 4 # angle steel. The track is made of 4 # angle steel.
2. Return air system
1) Adopting a downward and upward circulation method to balance the hot air.
2) Guide plate air supply, perforated air outlet on the bottom plate.
3) All air ducts are made of galvanized sheet metal.
3. Electric heating system
The heating tube is equipped with a heat sink, and the oven has an installed power of 9KW. When the temperature reaches the upper limit, the insulation group will automatically shut down. Automatically activated at the lower temperature limit. The circulating fan adopts special insulation and low shaft treatment, effectively protecting the motor. Fan power 0.75KW
4. Electrical control system
This system adopts relatively centralized control throughout the entire line, with neatly arranged electrical appliances and appropriate selection of fastener specifications. The specifications of the trough bridge meet the requirements and are arranged neatly.
1) All electrical equipment complies with national standards and uses high-quality branded products from designated manufacturers such as Chint and Delixi.
2) The temperature controller adopts digital display, and both the set temperature and actual temperature are centrally displayed on the control cabinet panel.
3) The entire system design and installation comply with national regulations

                                   
                     

Technical specifications

Temperature range: room temperature -300 degrees

Single door, double door, multi story, etc

Operation mode: button or touch screen

Mixing fan hot air circulation

Power supply: 380V

Heating tube: Stainless steel heating tube
 

Classify according to the industry in which industrial ovens are used and the performance of the products themselves
Divided by the industries in which ovens are used: electronic industry ovens, food industry ovens, medical industry ovens,
Agricultural industry ovens, chemical industry ovens, wind power industry ovens;
2. From the perspective of the performance of industrial oven products, they can be divided into: vacuum oven, high-temperature oven, laboratory oven,
Precision oven, battery aging oven, amplifier oven, electric blast oven, etc

                                         

Product Parameters