Audited Supplier
QO-4040RB
Household Appliances, Auto Part
Air Cooling
Automatic
High Frequency
AC
Vertical
Pneumatic
400*400mm
220V 50Hz
600kg
650kg
QIAO
Wood Case
Shenzhen
8468800000
Product Description
Welding principle:
The hot plate machine exploit the fact that electrothermal melting principle,Control temperature changes, with perfect mechanical means for perfect welding.It compensates for the lack of ultrasonic welding for welding large and special plastic parts.The plastic component to be fused is heated by a metal plate having a higher melting point than the plastic material, and is heated at the joint surface of the fused joint to melt the joint of the plastic part.After the contact surface is melted, the hot metal plate is removed, and the upper and lower plastic parts are pressed to fuse the joint. It can meet the requirements of watertight and airtight after welding, and is suitable for welding various shapes, sizes and various thermoplastic parts. It is a welding process with wide application, economical and practical, and high production efficiency.
Scope of application:
It is mainly used for welding of thermoplastic materials such as PE, PP, ABS, nylon, acrylic, POM, etc. and plastic parts with large and complex weld area. As such car lights, car water tanks, washing machine water plugs, batteries, steam irons, car tails, car dashboards, board, dust buckets, washing machine balance ring lights, And the welding of other irregular shaped plastic products....etc.
Machine introduction:
The hot plate machine welds the plastic components through a temperature-controlled heating plate. When heating, the heating plate device is used between two plastic parts. When the workpiece is in close contact with the hot plate, the plastic begins to melt. After the heat time elapses, the material is heated under the heating element, the molecules reach the molten state, and the heating plate is retracted. In a short time, the two plastic parts are pressed under a certain pressure, and are integrated into each other by molecular motion, and after cooling for a certain period of time, The two plastic parts will be fused together and achieve a certain welding strength, thus achieving the welding function.
Machine features:
1.Easy to learn and operate.
2. The transmission system is driven by pneumatic, hydraulic drive or servo motor.
3. Can be applied to workpieces of different sizes without area limitation
4. Can Perfect welding for irregular workpieces without any other consumables
5. The welding surface can allow the plastic allowance to be compensated, and the welding strength is guaranteed.
6. According to the needs of various materials, the welding procedure can be adjusted, and the design is smart enough to meet the production needs.
7. It adopts man-machine interface and PLC control system, which is intuitive and convenient to operate.
8. Digital display temperature controller, the welding temperature is more stable
9. Fast speed, labor saving and high production efficiency
Specification parameter:
| Model | QO-4040RB | QO-R4060RB |
| Table size | 400*400mm | 400*600mm |
| Transmission system | Pneumatic / hydraulic / servo drive optional | |
| Power supply | AC 220V or 380V 50HZ | |
| Output power | 10-70KW | |
| Temperature control | 0-5000C | |
| Input pressure | 0.6-1.0Mpa | |
| Control System | PLC control system | |
| Total size | ||
| Total net weight | 350kg | 500kg |
Related Products:
