Audited Supplier
Basic Info.
| Product Name | Q345B Structural carbon Steel H Beams in warehouse |
| Material | Q235/Q345/SS440/SS540/S235JR/JIS G3192/BS EN 10034/ASTM A6, A36/ST52 |
| Hight | 100-900mm |
| Width | 100-408mm |
| Thickness | t1: 6-21mm, t2: 8-35mm |
| Length | 6~12m |
| Technique | Hot rolled |
| Application | Steel structure/building material/construction/Bridges/vehicles/brackets/machinery, etc. |
H-shaped steel is an economical cross-section high-efficiency profile with more optimized cross-sectional area distribution and a more reasonable strength-to-weight ratio. It is named because its cross-section is the same as the English letter "H". Since all parts of the H-shaped steel are arranged at right angles, the H-shaped steel has the advantages of strong bending resistance in all directions, simple construction, cost saving and light structural weight, and has been widely used.
Our factory has strong strength, advanced technology and equipment, experienced engineers, and can accept customized services.If any question,feel free to contact us.^_^
H beams are widely used in many constructions,such as building,highway,bridge,railway,tunnel,petroleum chemical industry and electric power industry equipment structure.H beam is environmentally friendly and reduce the nuisance dusts.H beam also can save the working time,because it is easy to carry and can be used in any weath.
The inner and outer sides of the flange of the H-beam are parallel or close to parallel, and the end of the flange is at a right angle, so it is named parallel flange I-beam. The web thickness of the H-shaped steel is smaller than that of the ordinary I-beam with the same height of the web, and the width of the flange is larger than that of the ordinary I-beam with the same height of the web, so it is also called wide-edge I-beam. Determined by the shape, the section modulus, moment of inertia and corresponding strength of H-beams are significantly better than ordinary I-beams of the same single weight. Used in metal structures with different requirements, whether it bears bending moment, pressure load, or eccentric load, it shows its superior performance. Compared with ordinary I-beams, it can greatly improve the bearing capacity and save 10% to 40% of metal. H-shaped steel has wide flanges, thin webs, multiple specifications, and flexible use. It can save 15% to 20% of metal in various truss structures. Because the inner and outer sides of the flanges are parallel and the edges are at right angles, it is easy to assemble and combine into various components, thereby saving about 25% of the welding and riveting workload, which can greatly speed up the construction speed of the project and shorten the construction period.
| H beam Section size (mm) | |||
Height×Breadth | Web thickness | Flange thickness | Weight (kg/m) |
100×100 | 6 | 8 | 16.9 |
125×125 | 6.5 | 9 | 23.6 |
150×150 | 7 | 10 | 31.1 |
175×175 | 7.5 | 11 | 40.4 |
200×200 | 8 | 12 | 49.9 |
250×250 | 9 | 14 | 71.8 |
300×300 | 10 | 15 | 93.0 |
300×300 | 15 | 15 | 105.0 |
350×350 | 12 | 19 | 134.9 |
400×400 | 13 | 21 | 171.7 |
148×100 | 6 | 9 | 20.7 |
194×150 | 6 | 9 | 29.9 |
244×175 | 7 | 11 | 43.6 |
294×200 | 8 | 12 | 55.8 |
340×250 | 9 | 14 | 78.1 |
390×300 | 10 | 16 | 104.6 |
440×300 | 11 | 18 | 120.8 |
482×300 | 11 | 15 | 110.8 |
488×300 | 11 | 18 | 124.9 |
582×300 | 12 | 17 | 132.8 |
588×300 | 12 | 20 | 147.0 |
100×50 | 5 | 7 | 9.3 |
125×60 | 6 | 8 | 13.1 |
150×75 | 5 | 7 | 14.0 |
175×90 | 5 | 8 | 18.0 |
198×99 | 4.5 | 7 | 17.8 |
200×100 | 5.5 | 8 | 20.9 |
248×124 | 5 | 8 | 25.1 |
250×125 | 6 | 9 | 29.0 |
298×149 | 5.5 | 8 | 32.0 |
300×150 | 6.5 | 9 | 36.7 |
346×174 | 6 | 9 | 41.2 |
350×175 | 7 | 11 | 49.4 |
396×199 | 7 | 11 | 56.1 |
400×200 | 8 | 13 | 65.4 |
446×199 | 8 | 12 | 65.1 |
450×200 | 9 | 14 | 74.9 |
496×199 | 9 | 14 | 77.9 |
500×200 | 10 | 16 | 88.1 |
596×199 | 10 | 15 | 92.4 |
600×200 | 11 | 17 | 103.4 |
700×300 | 13 | 24 | 181.8 |
800×300 | 14 | 26 | 206.8 |
900×300 | 16 | 28 | 240.1 |
H-shaped steel can be produced by welding or rolling. Welding H-shaped steel is to cut the strip steel with suitable thickness into suitable width, and weld the flange and web together on the continuous welding unit. Welded H-shaped steel has disadvantages such as large metal consumption, difficulty in ensuring uniform product performance, and limited size specifications. Therefore, H-shaped steel is mainly produced by rolling method.
H Beams are commonly used in the constuction of buildings as well but also large trailers and bridges,among others.Due to their slightly different cross-section shape, thicker central web and wider flanges, H beams can bear larger loads than I beams.
H-Beams cost less than I-Beams For The Same Amount of Structural Support. H beams and I beams are two different types of structural steel members that are commonly used in construction.
What grade is H beam?
Steel h-pile beams and steel wide flange beams come in eight ASTM standards, including A36, A572-Grade 50, A588, A690, A709, A913-Grade 50, A913-Grade 65, and A992.
Various stamping parts, architectural and engineering structures and some less important machine structures and zero parts.
Due to the above advantages, H-shaped steel is widely used, mainly for: various civil and industrial building structures; various large-span industrial plants and modern high-rise buildings, especially industrial plants in areas with frequent seismic activities and high-temperature working conditions; requirements Large bridges with large bearing capacity, good section stability, and large spans; heavy equipment; highways; ship skeletons; mine support; foundation treatment and dam engineering; various machine components.
Jinan Zunkai Group founded in 2002,with five branch companies and is well-founded.
Our annual sales nearly one billion,about 300000 tons steel.
Our company is located in jinan City,ShanDong Province.
We entered into a strategic partnership with Bao Steel,laiwu Steel,Rizhao Steel,Handan Steel,Anyang Steel,Maanshan Steel and other domestic large steel companies.
Zunkai is the largest steel aluminum and copper supplier in Shandong Provinces,
We also have ourselves raw materials process factory with 100000 Square meter for steel laser cutting,surface treatment and other further processing,and our stock always more than 20000 tons.
Zunkai Group mainly engaged in:aluminum sheet,copper tube,galvalume steel,PPGI,galvanized steel,steel plate,round bar,steel pipe,stainless steel product,angle bar,steel pile,H beam,I beam,angle,Channel flat steel ect.
Our good quality and reliable service will be your best trusted partner.Sincerely wish to building long and regular business with you forever.
Q: Are you trading company or manufacturer ?
A: We are professional manufacturer for steel pipe, and our company also is a very professional a trade company for steel
products.we can also provide a wide range of steel products.
Q: Will you delivery the goods on time?
A: Yes,we promise to provide best quality products and delivery on time .Honesty is our company's tenet.
Q: Do you provide samples ? is it free or extra ?
A: The sample could can provide for customer with free,but the courier freight will be covered by customer account.
Q: Do you accept the third party inspection?
A: Yes absolutely we accept.
Q: How could you guarantee your products?
A: Each piece of products is manufactured by certified workshops, inspected by Linxu piece by piece according to national QA/QC standard. We also could issue the warranty to customer to guarantee the quality.
Q: How do we trust your company?
A: We specialise in steel business for years, headquarter locates in Jinan, Shandong province, you are welcome to investigate in
any ways, by all means, you could place an order in Alibaba with trade assurance which could secure your payment.
