Audited Supplier
EU Series
CE
99.0%
Laboratory
EU Series Intelligent Integration Ultrapure Water
Cartridge
34kg
1
NEWMEEN
Carton
34Kg
Hunan, China (Mainland)
Product Description
Product Features:
With tap water inlet, using the innovative human-computer interactive control system and 5-inch colorful resistive touch screen, integrating functions of Internet of Things (IOT) and cloud platform, embedding new purification cartridges with patented structure, stable and reliable single RO system, and DI ion-exchange cartridges with larger capacity, equipping with built-in 1.8-liter pressure water tank.
System output: 20, 40, 60 liters/h. It can simultaneously produce ultrapure water (18.2MΩ.cm) and high pure water (>16MΩ.cm). The quality of pure water fully meets or exceeds the requirements of water quality standard specified by ASTM D1193-06, GB/T 11446.1-2013, GB/T 33087-2016, GB/T 6682-2008, CP, EP, USP, JP, CAP, CLSI, etc.
System output: 20, 40, 60 liters/h. It can simultaneously produce ultrapure water (18.2MΩ.cm) and high pure water (>16MΩ.cm). The quality of pure water fully meets or exceeds the requirements of water quality standard specified by ASTM D1193-06, GB/T 11446.1-2013, GB/T 33087-2016, GB/T 6682-2008, CP, EP, USP, JP, CAP, CLSI, etc.
Innovative design of cartridge structure
- Patented 3-chamber design, compatible with packaging of PP/PC/RO/DI cartridge, to ensure consistency.
- Patented clamping mechanism, easier and more efficient to install and replace the cartridge.
- Patented error-proofing design, effective to avoid installation errors of different cartridges.
- 12-inch cylinder with 1.36L resin filling capacity brings more bigger ion exchange capacity and more effective filtration.
- Encrypted long serial number verification code can identify the authenticity of cartridges, record the use and replacement of cartridges, and ensure the safety of the system.
Professional PE pure water tank(Optional)
- Material: HDPE, double layer design. Anti-UV inhibitor is added to the outer layer to prevent the growth of algae inside and improve the durability of the tank. Pure PE raw material is used in inner layer to reduce material precipitation and ensure water quality safety.
- Drainage valve is installed at the cone bottom, which can empty the water tank and ensure thorough cleaning.
- Feeding from the bottom can reduce CO2 absorption.
- The enlarged cover with seal can prevent air from entering and facilitate manual cleaning.
- Compound air filter is in the standard configuration, containing special packing and microporous membrane, to absorb CO2 and organics, and filtrate bacteria and particles.
- UV disinfection module is optional to sterilize tank and inhibit the growth of bacteria in the tank.
- Equipped with an independent pressure sensor, independent level control module and LCD display, it can display the liquid level, storage (L) and storage percentage (%) of the water tank in real-time in the form of dynamic icons. A clear glance for storage status.
All injection molded housing
- New and advanced manufacturing process bring compelling customer experience.
- With geometric surfaces and simple lines, to show rich three-dimensional sense. With extraordinary imagination, to highlight the aesthetics of science and technology. Beautiful & Easy to use.
Powerful HiDis water dispenser arm(Optional)
- Color display, to monitor dispensing resistivity, water temperature, flow rate, single and cumulative water quantity.
- General, quantitative, instant - 3 water dispensing modes cycle, meeting with needs of different water dispensing mode.
- It can be fixed on the bracket in any direction of 360 degrees horizontally, making dispensing water more flexible in different directions.
- Function of circulating with the host can always ensure the quality of pure water.
- Equipped with 0.2μm MF terminal microfilter or UF terminal ultrafilter, to produce bacterial-free, nuclease-free, proteinase-free ultrapure water.
- Up to 5 sets of HiDis water dispenser arm can be connected to one host, fully covering the pure water usage range on the laboratory table.
| Name | Standard | Low TOC | Eliminating endotoxin | Synthesizing |
| Model | EU-20/40/60 | EU-20/40/60UV | EU-20/40/60UF | EU-20/40/60UVF |
| Production rate | 20 series: 20 L/hour, 40 series: 40 L/hour, 60 series: 60 L/hour | |||
| Dispensing rate | Up to 2 liters/minute | Up to 2 liters/minute | Up to 2 liters/minute | Up to 2 liters/minute |
| Ultrapure water quality | ||||
| Resistivity(25ºC) | 18.2 MΩ.cm | 18.2 MΩ.cm | 18.2 MΩ.cm | 18.2 MΩ.cm |
| Conductivity(25ºC) | 0.055 μs/cm | 0.055 μs/cm | 0.055 μs/cm | 0.055 μs/cm |
| TOC | 5 ppb | 2 ppb | 5 ppb | 2 ppb |
| Particles | <1 /ml (>0.2μm) | <1 /ml (>0.2μm) | <1 /ml (>0.2μm) | <1 /ml (>0.2μm) |
| Bacteria | <0.01 CFU/ml | <0.01 CFU/ml | <0.01 CFU/ml | <0.01 CFU/ml |
| Endotoxin | N/A | N/A | <0.001 EU/ml | <0.001 EU/ml |
| RNases | N/A | N/A | 1 pg/ml | 1 pg/ml |
| DNases | N/A | N/A | 5 pg/ml | 5 pg/ml |
| Protease | N/A | N/A | 0.15 μg/ml | 0.15 μg/ml |
| DI water quality | ||||
| Resistivity(25ºC) | >16 MΩ.cm | >16 MΩ.cm | >16 MΩ.cm | >16 MΩ.cm |
| Conductivity(25ºC) | <0.063 μs/cm | <0.063 μs/cm | <0.063 μs/cm | <0.063 μs/cm |
| Particles | N/A | N/A | N/A | N/A |
| Bacteria | N/A | N/A | N/A | N/A |
| RO1st water quality | ||||
| Ion rejection rate | 98%-99%(with new RO module) | 98%-99%(with new RO module) | 98%-99%(with new RO module) | 98%-99%(with new RO module) |
| Organic rejection rate | >99%(MW>300 Dalton) | >99%(MW>300 Dalton) | >99%(MW>300 Dalton) | >99%(MW>300 Dalton) |
| Particles and bacteria rejection rate | >99% | >99% | >99% | >99% |
| Feed water requirements | ||||
| Water source type | Tap water | Tap water | Tap water | Tap water |
| Pressure | 1-6 bar | 1-6 bar | 1-6 bar | 1-6 bar |
| Temperature | 5-40 ºC | 5-40 ºC | 5-40 ºC | 5-40 ºC |
| Conductivity | <2000 μs/cm | <2000 μs/cm | <2000 μs/cm | <2000 μs/cm |
| Total hardness(In CaCO3) | <300 ppm | <300 ppm | <300 ppm | <300 ppm |
| TOC | <2000 ppb | <2000 ppb | <2000 ppb | <2000 ppb |
| Free chlorine | <3 ppm | <3 ppm | <3 ppm | <3 ppm |
| PH | 4-10 | 4-10 | 4-10 | 4-10 |
| Dissolved CO2 | <30 ppm | <30 ppm | <30 ppm | <30 ppm |
| Power supply | 20/40 series: 100-240V,50/60Hz, 60 series: 200-240V,50/60Hz | |||
| Total Power | 20/40 series: 120W, 60 series: 240W | |||
| Dimension (L×W×H) | Main host: 370×623×600mm | Main host: 370×623×600mm | Main host: 370×623×600mm | Main host: 370×623×600mm |
| Weight | Main host: about 28KG | Main host: about 28KG | Main host: about 28KG | Main host: about 28KG |
| Standard configuration | Main host 1 set | Main host 1 set | Main host 1 set | Main host 1 set |
| All cartridges 1 set | All cartridges 1 set | All cartridges 1 set | All cartridges 1 set | |
| 1.8-liter pressure water tank 1 set | 1.8-liter pressure water tank 1 set | 1.8-liter pressure water tank 1 set | 1.8-liter pressure water tank 1 set | |
Q1. What products do you offer?
We offer a wide range of laboratory instruments including centrifuge, vacuum centrifugal concentrators, veterinary equipment, laboratory Water Purifier, nitrogen / hydrogen / air generator, vacuum freeze dryers, homogenizers, freezing microtome, high-throughput tissue grinders, ultrasonic cleaning machines, magnetic stirrer and more. In addition, we also provide single-use bioprocessing products. Welcome to inquire us.
Q2. What kind of services do you offer?
We offer sales, installation, maintenance, and repair services for all of our laboratory instruments.
Q3. Do you have a factory?
Yes, we have a certified standard factory with professional manufacturing capabilities, welcome to visit our factory.
Q4. Can I use my own logo or design on the goods?
Yes, we provide OEM/ODM service, your logo and design can be made on the products.
Q5. Do you ship internationally?
Yes, we ship internationally to customers all over the world.
Q6. Do you provide warranty for your products?
Yes, we provide a warranty for all of our products. Please refer to the specific product page for more information on the warranty period.
Q7. How can I place an order?
To place an order, please contact our sales team via email or phone. They will assist you with the ordering process.
Q8. Can I request a custom configuration for a product?
Yes, we can accommodate custom configurations for certain products. Please contact our sales team to discuss your requirements.
