Audited Supplier
RRS3000
Overall Seas Installation
Full Running Life
Scrap Metal Shredder
Automatic
ISO, CE
Radiator Recycling Machine
as Customized Type
132+132
Blue, White, Grey
CE ISO SGS
Blade Disk and Blade
Popular From 1985
Provided
Provide Overseas Installation
All Scrap Metal
Depend on Machine Type
50-180mm
Round or Similar
AC Motor
New
Huihe
Plastic Film/Nude
1*40HQ+1*20FT
China
8479819000
Product Description
WhHuihe Aluminum and Copper Radiator Recycling Machine
Why Need to Recycle the Radiator?
The radiator consists of aluminum, copper, Iron, stainless steel and other components.
In daily life, if the waste radiator is sold directly without dismantling, its price will be very
low, and there is no way to send it directly to smelting.
However, the dismantled radiator price will be very different. After dismantling radiator
by a radiator recycling line, you will get pure copper, aluminum, iron, and stainless steel.
At this time, the price will also be greatly increased. the pure materials will also be used
in various industrial fields.
After Shredding and Separating
How you can get clean copper from Aluminum Air Tank Recycling Machine ?
1 Feed Conveyor-Convey the waste radiator to the hammer mill or the pre-shredder for crushing,
2 Hammermill Shredder-you will get the crushed mixing radiator(copper, aluminum,stainless steel,iron,
brass)from here.
3 Magnetic drum separator-The iron mixing in the raw material will be separated here.
4 High Gauss magnetic separator-To remove the SS mixing in the raw material.
5 Density separator-To separate the copper and aluminum from here.
6 Output conveyor-to here, you will get the clean copper and aluminum.
Which type of Feeding Material is Suitable for Copper Radiator Recycling Machine ?
1. Industrial Radiator :
Such as the length of 3m and width with 1.5m type industrial radiator.
2. Radiator From Home AC.
No matter 1 layer or 2 layers or more.
3. Radiator From Car.
Notice:
1 All above three types of radiators be out of shape or just normal radiators, and it also can be attached
the SS, Brass, you can feed all different types of radiator to this radiator recycling machine, finally you will
get clean copper and aluminum and iron from this radiator recycling line.
2 This is a multifunctional type machine, your feeding material also can be profile, baled UBC, scrap metal,
Hard Plastic, Glass, and more.
Four Type Production Line Copper Radiator Recycling Machine
More picture of the radiator recycling machine
Why Huihe
- Over 36 Years Of Radiator Recycling Machine Manufacturing Experience.
- Full Production Line Of Radiator Recycling Machine Testing Before Delivery.
- All Machine Checking One Step By One Step In Our Factory
- Fully Support Your Metal Recycling Business By Our Radiator Recycling Machine.
-Patient Guidance On Your Choosing Machine Type Based On Your Feeding Material.
-The Best Solution On Your Feeding Material And End-Products Usage.
Huihe All Different Recycling Line To Support Your Recycling Business.
About us:
With the machine production experience from 1985, we have a professional design and r & d team integrate
the development and production of AC Radiator Recycling Machine manufacturers in china, all the raw materials
and related accessories of the scrap metal shredder such as motor, reducer, electrical apparatus element meet to
meet the international standards.
At the same time, all of our scrap metal shredders will be running for 8 hours before delivery, as well as we will
test the requested material of what you need, just let us know your requirements. Meanwhile, our goods passed
CE ISO BV & SGS testing.
We will be your best partner in china for your ferrous and non-ferrous metal shredder and all other related metal
recycling machines.
FAQ
1) Are you a manufacturer or trading company?
We are a professional Ferrous/Nonferrous recycling manufacturer from 1985, two workshops with 165 employees (2018) and an export proportion of around 40%.
2) How can I trust your company?
A. Modernized management and quality control system, experienced production team, advanced manufacturing and processing facility.
B. Famous brand component as our standard configuration, like siemens/china first-class motor, tongli or sew reducer, siemens plc, and chint component.
C. Assessed by the third-party-national test center. National patents for all equipment, also CE ISO SGS.. Welcome to inspect anytime. Our airport is xinzheng international airport(CGO).
3) How about machinery test running & installation?
Before the order, welcome you to come to testing all machines in our factory, we have ready machines all the time.
Before shipping your machines, we will invite you to come to test your machines.
4) About installation of training.
We will send our engineer team(at least one mechanical engineer and one electrical engineer) to your country to help you to install the machine, commission and training your workers.
5) Any warranty?
Under the proper usage, 15 months for whole metal shredder machinery.
Why Need to Recycle the Radiator?
The radiator consists of aluminum, copper, Iron, stainless steel and other components.
In daily life, if the waste radiator is sold directly without dismantling, its price will be very
low, and there is no way to send it directly to smelting.
However, the dismantled radiator price will be very different. After dismantling radiator
by a radiator recycling line, you will get pure copper, aluminum, iron, and stainless steel.
At this time, the price will also be greatly increased. the pure materials will also be used
in various industrial fields.
After Shredding and SeparatingHow you can get clean copper from Aluminum Air Tank Recycling Machine ?
1 Feed Conveyor-Convey the waste radiator to the hammer mill or the pre-shredder for crushing,
2 Hammermill Shredder-you will get the crushed mixing radiator(copper, aluminum,stainless steel,iron,
brass)from here.
3 Magnetic drum separator-The iron mixing in the raw material will be separated here.
4 High Gauss magnetic separator-To remove the SS mixing in the raw material.
5 Density separator-To separate the copper and aluminum from here.
6 Output conveyor-to here, you will get the clean copper and aluminum.
Which type of Feeding Material is Suitable for Copper Radiator Recycling Machine ?
1. Industrial Radiator :
Such as the length of 3m and width with 1.5m type industrial radiator.
2. Radiator From Home AC.
No matter 1 layer or 2 layers or more.
3. Radiator From Car.
Notice:
1 All above three types of radiators be out of shape or just normal radiators, and it also can be attached
the SS, Brass, you can feed all different types of radiator to this radiator recycling machine, finally you will
get clean copper and aluminum and iron from this radiator recycling line.
2 This is a multifunctional type machine, your feeding material also can be profile, baled UBC, scrap metal,
Hard Plastic, Glass, and more.
Four Type Production Line Copper Radiator Recycling Machine
| Model | Feeding port size(mm) | Motor power(kw) | Capacity(t/h) |
| RRS500 | 600 | 55 | 0.8-1.5 |
| RRS1500 | 800 | 160 | 1-1.5 |
| RRS3000 | 1200 | 200 | 2-3 |
| RRS4500 | 2000 | 315 | 4-6 |
More picture of the radiator recycling machine
Why Huihe
- Over 36 Years Of Radiator Recycling Machine Manufacturing Experience.
- Full Production Line Of Radiator Recycling Machine Testing Before Delivery.
- All Machine Checking One Step By One Step In Our Factory
- Fully Support Your Metal Recycling Business By Our Radiator Recycling Machine.
-Patient Guidance On Your Choosing Machine Type Based On Your Feeding Material.
-The Best Solution On Your Feeding Material And End-Products Usage.
Huihe All Different Recycling Line To Support Your Recycling Business.
About us:
With the machine production experience from 1985, we have a professional design and r & d team integrate
the development and production of AC Radiator Recycling Machine manufacturers in china, all the raw materials
and related accessories of the scrap metal shredder such as motor, reducer, electrical apparatus element meet to
meet the international standards.
At the same time, all of our scrap metal shredders will be running for 8 hours before delivery, as well as we will
test the requested material of what you need, just let us know your requirements. Meanwhile, our goods passed
CE ISO BV & SGS testing.
We will be your best partner in china for your ferrous and non-ferrous metal shredder and all other related metal
recycling machines.
FAQ
1) Are you a manufacturer or trading company?
We are a professional Ferrous/Nonferrous recycling manufacturer from 1985, two workshops with 165 employees (2018) and an export proportion of around 40%.
2) How can I trust your company?
A. Modernized management and quality control system, experienced production team, advanced manufacturing and processing facility.
B. Famous brand component as our standard configuration, like siemens/china first-class motor, tongli or sew reducer, siemens plc, and chint component.
C. Assessed by the third-party-national test center. National patents for all equipment, also CE ISO SGS.. Welcome to inspect anytime. Our airport is xinzheng international airport(CGO).
3) How about machinery test running & installation?
Before the order, welcome you to come to testing all machines in our factory, we have ready machines all the time.
Before shipping your machines, we will invite you to come to test your machines.
4) About installation of training.
We will send our engineer team(at least one mechanical engineer and one electrical engineer) to your country to help you to install the machine, commission and training your workers.
5) Any warranty?
Under the proper usage, 15 months for whole metal shredder machinery.
