Audited Supplier
For Capturing:
- Welding Fumes- Grinding Dusts
- Dry Dusts
- Soldering Dusts
- Powders
- Cutting
- Polishing
Features:
- 1000~50000m3/h
- Spark Trap
- Auto-Pulse Clean
- Laser Cutting Machine
- Plasma Cutting Machine
- Welding Station
1. Welding fume extractor and dust collector is a series of products of large air flow, it is suitable for the integration design with dust collector due to the fan's motor measurement is very large.
2 .Thus this series dust collectors adopted the split type design.
3. The sole fan isolation sound box and sound eliminator makes the large air flow fan's noise minimization.
4. We adopt multi-stage resistance fire device inside the dust collector to make sure the operating security.
5. Whatever your production line is : large scale welding or grinding workshop, welding center, robot welding line, plasma & laser cutting, you will find suitable model for you.
6. We design the most suitable fume capturing device and pipeline system according to client different site conditions, and choose required air flow dust collecting system.
7. A complete series of models have been developed to meet the different site conditions.
8. Welding rooms of different size and shape, manual/pneumatic/electric hood and the other kinds of dust capture device can also be designed for special sites need.
| Product Name | Airflow m3/h | Power kW | Voltage V | Filter Area m2 | Filter Precision % | Noise dB(A) | Size mm |
| Dust Collector for Laser Cutting Machine JG04-JG12 | 4000 | 5.5KW | 380V/50Hz/3P 415V/50Hz/3P 220V/60Hz/3p | 94 | 99.50% | 82 | 1300*940*2200 |
| 6000 | 7.5kW | 140 | 99.50% | 83 | 1800*1050*2200 | ||
| 9000 | 11kW | 188 | 99.50% | 84 | 1800*1100*2820 | ||
| 10000 | 15kW | 284 | 99.50% | 85 | 1800*1200*3300 | ||
Q1: Is there any noise?
A 1: The fans will have sound insulation cotton and will not produce excessive noise.
Q2: Why is the plastic spraying process recommended for the surface treatment of the dust colector?
A 2: The paint is not easy to fal off , and it is more durable.
Q3: How to configure the air volume of the dust colector?
A 3: There is an exhaust port at the botom of the cutting platform, which is already standard when the laser cutting machine leaves the factory. You only need to measure the diameter of the pipe , and then tel us, by calculation, you can know how much air volume is needed for the dust collector .
Q4: Alot of sparks wil be generated during cutting, which may scald the filter material of the dust collector or burn the filter material directly, causing a fire accident . How to avoid such accidents?
A4 : Install spark catcher. There are three types of spark traps, embedded baffle type, pipe baffle type, and pipe swirl type.The spark catcher uses a labyrinth structure to make the spark enter the cold plate several times to extinguish it .
Q5: The dust and fume generated during cutting will polute the air in the workshop .How to eliminate such pollution?
A5 : The high - precision imported flame-retardant filter material is used as the standard filter cartridge filter unit to filter dust and smoke, similar to the filter element of an automobile engine .
Q6: Do you need to vent a chimney?
A 6: No need to discharge the chimney. High-precision filter material is used to filter 0.3Um dust , with a dust removal efficiency of over 99%, and it can be directly discharged indoors .
Q7: Can the environmental protection meet the standards?
A7: It can meet the standard.
Q9 : Is there an after - sales warranty?
A9 : The warranty period is one year, and maintenance is free during the warranty period; only the cost of replacement parts is charged outside the warranty period .
A10 : We can provide OEM or OD М OEM service for you . We ' ll offer you the quotation as soon as possible once receive your inquiry, so don't hesitate to contact uS . We can produce the product under your brand name ; also the size can be changed as your requirement .