Hxhj-Xf06 Dust Collector with 7.5kw Fan for Welding, Grinding, Polishing

Characteristics of Dust Collectors for Laser cutting Machines

High - Efficiency Filtration
These dust collectors are designed to have a high - efficiency filtration system. They can capture a wide range of particulate matter, including fine dust and fume during the laser - cutting process. The filtration efficiency can often reach up to 99.99% or even higher, ensuring that the air expelled from the system is clean and free of harmful particles.
Adaptability to Different Dust Types
Laser cutting operations can produce various types of dust, depending on the materials being cut. The dust collectors are capable of handling different dust characteristics. For example, when cutting metal, the dust collector can effectively deal with metal fines and fume, and when cutting plastics or composites, it can also adapt to the unique properties of those materials' dust.
Powerful Suction Capacity
To quickly and effectively remove dust from the cutting area, the dust collectors have a powerful suction capacity. The suction force is strong enough to draw in the dust as soon as it is produced, preventing it from spreading in the workshop. This is crucial for maintaining a clean and safe working environment and also for protecting the precision components of the laser cutting machine from dust damage.
Compact and Space - Saving Design
Many of these dust collectors are designed to be compact. They can be easily installed near the laser - cutting machine without taking up too much valuable floor space. Their space - saving design allows for better utilization of the workshop area and also enables convenient connection to the cutting equipment for efficient dust collection.
Low Noise Operation
The dust collectors are usually engineered to operate at a relatively low noise level. This is beneficial for the working environment as it reduces noise pollution. The noise level is often controlled within an acceptable range, typically below 80 decibels, so that workers can focus on their tasks without being disturbed by excessive noise from the dust - collecting equipment.
Safe and Reliable Operation
These dust collectors are equipped with safety features such as over-temperature protection and over - current protection. They ensure the safe and reliable operation of the equipment. In case of abnormal conditions, the safety mechanisms will be activated to prevent damage to the dust collector and other related equipment and to ensure the safety of the operators.

Q1: Is there any noise?
A 1: The fans will have sound insulation cotton and will not produce excessive noise.

Q2: Why is the plastic spraying process recommended for the surface treatment of the dust colector?
A 2: The paint is not easy to fal off , and it is more durable.

Q3: How to configure the air volume of the dust colector?
A 3: There is an exhaust port at the botom of the cutting platform, which is already standard when the laser cutting machine leaves the factory. You only need to measure the diameter of the pipe , and then tel us, by calculation, you can know how much air volume is needed for the dust collector .

Q4: Alot of sparks wil be generated during cutting, which may scald the filter material of the dust collector or burn the filter material directly, causing a fire accident . How to avoid such accidents?
A4 : Install spark catcher. There are three types of spark traps, embedded baffle type, pipe baffle type, and pipe swirl type.The spark catcher uses a labyrinth structure to make the spark enter the cold plate several times to extinguish it .

Q5: The dust and fume generated during cutting will polute the air in the workshop .How to eliminate such pollution?
A5 : The high - precision imported flame-retardant filter material is used as the standard filter cartridge filter unit to filter dust and smoke, similar to the filter element of an automobile engine .

Q6: Do you need to vent a chimney?
A 6: No need to discharge the chimney. High-precision filter material is used to filter 0.3Um dust , with a dust removal efficiency of over 99%, and it can be directly discharged indoors .

Q7: Can the environmental protection meet the standards?
A7: It can meet the standard.

Q8: Is it easy to install?

A8: It is easy to instal .

Q9 : Is there an after - sales warranty?
A9 : The warranty period is one year, and maintenance is free during the warranty period; only the cost of replacement parts is charged outside the warranty period .

 

Q10: Can it be OEM or ODM?
A10 : We can provide OEM or OD М OEM service for you . We ' ll offer you the quotation as soon as possible once receive your inquiry, so don't hesitate to contact uS . We can produce the product under your brand name ; also the size can be changed as your requirement .

Feedback
If you are satisfied with the items, please give us the second order or please introduce us to your friend. If you are not satisfied with it, please contact us. we wil solve the problem for you as soon as possible.