Audited Supplier
DX1520
Online Installation
12 Months
Worktable Milling Machine
Bed type
Angle Milling Cutter
CNC
Automatic
High Precision
CE
New
Dx1520
2000mm
1500mm
50~650 mm/Min
80~400 R/Min
2.2 Kw 1400 Rpm
0--45 Degree
AC 380V, 50 Hz, 3 P
160-315mm
Linear Guiding Rail
0~45 Degree
125-630 Rpm
500 mm/Min
Tx32A
2000 mm
Lemar
Standard Packing
Jiangsu, China
8459699000
Product Description
Hydraulic clamping 1500*2000mm CNC H-beam box beam End Face Milling Machine
CNC face milling machine is suitable for cutting H-beam, round pipe section, and both ends of BOX-beam. It can mill workpiece plane, chamfer trapezoid surface and T-slot. Drilling can reach φ50mm, and boring can reach φ400mm.
The cutting and milling surface has high precision and low noise, and the stepless speed change can be implemented after installing the frequency conversion device.
The whole machine has strong rigidity, is not easy to be damaged, easy to maintain, has various functions, and has large geometric dimensions.
CNC End face milling machine is an ideal equipment for H beam box beam production line.
Technical Details:
Instructions for use of CNC face milling machine
1. Before starting the work, observe the lubrication of the bed guide rails, slide tables and other parts of the Box beam End face milling machine. Because the machine has many lubrication points, it should be ensured that the lubrication is sufficient. For other precautions, please refer to the operating regulations of the machine tool industry.
2. Pay attention to the fast and slow operation of the slide table:
(1) Slow cutting motion: press the fast-forward button to fast-forward the worktable, and when cutting is required, press the work-forward button to start the worktable; when the cutting is finished, the worktable stops first, and then presses the fast-reverse button to quickly return the worktable , when the rear limit switch is pressed, the table stops moving. 
Our main products are:
Box beam production line series
H-beam production line series equipment
U-beam production line series equipment
Wind tower production line
CNC cutting series
Shot blasting machine
Automatic welding center
Automatic welding manipulator
Welding positioner
Welding roller frame displacement Machines and other special machines, auxiliary machines, edge milling machines, end milling machines, steel plate splicing machines, etc.
The products cover all parts of the country and are exported to Europe, America, Southeast Asia and the Middle East and other countries. It is one of the domestic H-beam production line export bases. Economic globalization has brought unprecedented development opportunities to Lemar Machinery.
In the wave of economic globalization, we will build a world-class brand and move towards a higher goal!
CNC face milling machine is suitable for cutting H-beam, round pipe section, and both ends of BOX-beam. It can mill workpiece plane, chamfer trapezoid surface and T-slot. Drilling can reach φ50mm, and boring can reach φ400mm.
The cutting and milling surface has high precision and low noise, and the stepless speed change can be implemented after installing the frequency conversion device.
The whole machine has strong rigidity, is not easy to be damaged, easy to maintain, has various functions, and has large geometric dimensions.
CNC End face milling machine is an ideal equipment for H beam box beam production line.
Technical Details:
| Item | Details |
| Model | DX1520 End Milling Machine |
| Milling for | Pipe or Box beam H beam CNC End Facing Machine |
| Control mode | CNC Control |
| Workpiece box beam Height | 2000mm |
| Workpiece box beam Width | 1500mm |
| Facing Head Power | 7.5 KW |
| Horizontal feed motor power | 2.2 KW |
| Horizontal Facing Speed | Stepless within 150∼600mm/min, VFD, inverter control |
| Power supply | 380V, 60Hz, 3p |
| Milling head spindle speed | 75~420 rpm |
| Vertical Facing Speed | Stepless within 150∼ 600mm/min, VFD, inverter control |
| Column along Horizontal and Milling carriage along Vertical direction Idle Speed | 1200 mm/min., constant |
| Facing Head Spindle Rotation Speed | 100 ~ 630rpm |
| Travel Guide in Horizontal and Vertical Way | Heavy duty Precise Linear Guiderail, Assembled |
| Travel Transmission | Horizontal by gear and rack; Vertical by leadscrew |
| Angle of Facing Head along Vertical Surface | 0 ∼45 degree |
| Vertical Milling Carriage Travel Driving Motor | 3 kW |
1. Before starting the work, observe the lubrication of the bed guide rails, slide tables and other parts of the Box beam End face milling machine. Because the machine has many lubrication points, it should be ensured that the lubrication is sufficient. For other precautions, please refer to the operating regulations of the machine tool industry.
2. Pay attention to the fast and slow operation of the slide table:
(1) Slow cutting motion: press the fast-forward button to fast-forward the worktable, and when cutting is required, press the work-forward button to start the worktable; when the cutting is finished, the worktable stops first, and then presses the fast-reverse button to quickly return the worktable , when the rear limit switch is pressed, the table stops moving.
(2)Rapid movement of the table of T beam end face milling equipment: At this time, you can select the fast gear, and jog fast forward (or fast backward) to the required position, which can reduce the auxiliary time of cutting.
Lemar has more than 10 years of experience specializing in mechatronics products such as cutting and welding equipment, CNC machinery, robot auxiliary equipment, etc.; has cultivated a team of experienced and highly skilled talents
Our main products are:
Box beam production line series
H-beam production line series equipment
U-beam production line series equipment
Wind tower production line
CNC cutting series
Shot blasting machine
Automatic welding center
Automatic welding manipulator
Welding positioner
Welding roller frame displacement Machines and other special machines, auxiliary machines, edge milling machines, end milling machines, steel plate splicing machines, etc.
The products cover all parts of the country and are exported to Europe, America, Southeast Asia and the Middle East and other countries. It is one of the domestic H-beam production line export bases. Economic globalization has brought unprecedented development opportunities to Lemar Machinery.
In the wave of economic globalization, we will build a world-class brand and move towards a higher goal!
