Audited Supplier
LK-G01
Auxiliary Equipment
General
CE, ISO13485, ISO9001
Adult
With LCD Display
LEKANG
Packed in Standard Marine Wooden Cases
277*470*320
Shandong, China
9402900000
Product Description
1. The main body of the pendant tower should be made of 6063 high-strength magnesium-aluminum alloy profiles, which have high corrosion resistance, are easy to clean, and are produced by molds. The surface of the tower body should be treated with environmentally friendly powder spraying.
2. The main body of the pendant tower is fully enclosed design, the tower protection level is IP20, and the shell fire rating is UL94-V1 to ensure safe use, stronger load-bearing capacity, no sharp angles on the surface, no screws, and accurate positioning of the pendant tower box. drift.
3. There will be no relative movement between the power lines and air source pipelines of all equipment carried on the hanging tower and the tower body. All power lines and air source pipelines are not exposed in the tower body, ensuring that during the movement of the hanging tower, The line will not fall off due to changes in position.
4. The rotation angle of the pendant box is <=340 degrees, which can achieve 360-degree seamless coverage.
5. The gas terminal can be plugged and unplugged more than 20,000 times. All gas interfaces have three states: on, off, and unplugged. The gas outlets are distinguished by international standard color codes, and there are devices or structures to prevent misinsertion of different gases.
6. Use imported high-quality medical gas pipelines, which must be designed with three layers to ensure safety in clinical use;
7. Instrument platform: Anti-collision angle design. There are stainless steel side rails on both sides to facilitate the fixation of small medical equipment.
8. Drawer: with damping automatic adsorption function, which can effectively prevent serious collisions with the equipment when opening and closing the drawer.
9. The format and quantity of gas terminals, lights, infusion stands, instrument platforms, drawers, power sockets, grounding terminals, network interfaces, etc. can be customized according to actual requirements.
Configuration:
1 Pendant Base 2 pieces
2 protective cover 1 set
3 center swivel arm 1 set
4 Dry area part 1200mm hanging box 1 piece
5 Instrument Platform 2 layers
6 instrument platform with drawer 1piece
7 swivel arm 1 set
8 double-joint infusion stand 1 piece
9 oxygen terminal homeland standard 2 pcs
10 Negative pressure suction terminals homeland standards 2pcs
11 Compressed air terminals homeland standards 2 pcs
12 power sockets 8pcs
13 RJ45 network interface 1piece domestically produced
14 Equipotential grounding terminals 2pcs domestically produced
15 Wet area part 1000mm davit box 1 piece
16 swivel arm 1 set
17 Instrument platform (with side rails) 1 layer
18 instrument platform with drawer 1 piece
19 Double joint infusion rod holder 1 piece
20 oxygen terminal homeland standards 2 pcs
21 Negative pressure suction terminal homeland standards 2 pieces
22 compressed air terminal homeland standards 2pcs
23 Power sockets 8pcs
24 RJ45 network interface 1piece domestically produced
25 Equipotential grounding terminals 2 domestically produced
26 Jiecang Brand motor 1piece
27 Surgical pendant lifting up and down 300mm
Remark: all of terminals can be customized
Packing & Delivery
LEKANG Medical Group is a professional medical equipment manufacturer with certificates, such as CE,ISO9001,ISO13485,SGS,factory base located in Qufu city of Shandong province, China. We are professional manufacturer for operating lamp, operating table, obstetric table ,medical pendant and medical trolley series with more than 20 years experience, we have two brand of CHENHONG and LEKANG and we have R&D center in Shandong to launch new products to meet the needs for hospital every year. Our products have been exported to the United States, Europe, Southeast Asia, the Middle East and the South America market etc. It is our aim to build long-term cooperation with our clients and to serve human's health care!
